THE JUMPGATE DEFINITIVE GUIDE - Tripod

PCM-AB2
Size: 1
Mass: 1492
4% increase to power
plant, engine thrust,
capacitor and shield
recharge rates.
PCM-AB3
PCM-AB4
Size: 1
Mass: 1812
6% increase to power
plant, engine thrust,
capacitor and shield
recharge rates.
Size: 1
Mass: 2550
9% increase to power
plant, engine thrust,
capacitor and shield
recharge rates.
EE - Engine Efficieny
PCM-EE1
PCM-EE2
Size: 1
Mass: 550
2% reduction to engine
power consumption.
Size: 1
Mass: 1100
3% reduction to engine
power consumption.
"PCM-AB2 adds phase correction to the power
delivery system of the PCM-AB1, resulting in a 4%
increase in all of the following: effective power
plant output, engine thrust, shield and capacitor
recharge rates."
"Another pre-collapse power distribution node,
this model adds its own energy storage system to
store unused power for delivery during peak
demand. Results: 6% increase in all of the
following: effective power plant output, engine
thrust, shield and capacitor recharge rates."
"The best in class of power distribution modx, this
system has all the features of PCM-AB3, plus a
system for recapturing high frequency noise and
delivering it as useable energy. This gives an
awesome 9% improvement in effective powerplant
output, engine thrust, shield and capacitor
recharge rates."
"Another pre-collapse device, the PCM-EE1 does
not increase the output of an engine, but rather
reduces the power consumed by a given engine by
2%. Like some other artifacts, it is also a force
field based system, that reduces the parasitic load
of stray ions hitting the conductors of the electromagnetic
acceleration stage of an engine."
"An artifact that is used to regulate the flow of
ions to the acceleration phase of an engine. This
reduces the power used by the engine for a given
thrust level by 3%."
169