THE JUMPGATE DEFINITIVE GUIDE - Tripod

PCM-EB3
Size: 1
Mass: 1220
8% increase to engine
thrust.
PB - Powerplant Boost
PCM-PB1
PCM-PB2
PCM-PB3
Size: 1
Mass: 428
3% increase to power plant
output.
Size: 1
Mass: 325
5% increase to power plant
output.
Size: 1
Mass: 890
8% increase to power plant
output.
"An artifact that is based on a very advanced (and
unfortunately lost) technology that uses localized
subspace fields to reduce the apparent mass of the
particles in the acceleration stage on an engine.
This results in a vastly increased exhaust velocity,
and thus a huge 8% increase in thrust."
"Another pre-collapse artifact that is based on
directed force fields. In this case the force field is
used to enhance the containment of the fusion
reaction that provides the base energy source of
any power plant. This increases the output of all
known power plants by 3%."
"PCM-PB2 is the designation for this pre-collapse
modx that is a precision flow regulator for
deuterium as it is sent to be fused. This increases
the output of a power plant by up to 5%."
"Another extremely advanced pre-collapse
technology, this device creates highly tuned
magnetic fields that reduce the losses inside the
photo-electric panels to near zero. These losses
were due to unwanted recombination of electrons
and holes inside the semi-conductor, resulting in
waste heat. Without these losses, power output is
increased by 8%."
167