You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Part Number<br />
Product Description<br />
60-917-95 Crystal Universal Fire Transmitter, Advent Commercial Fire: The Universal Fire Transmitter (UFT) is a supervised, wireless,<br />
encrypted Learn Mode sensor that adds wireless capability to a standard hardwire fire detection device. Compatible with Advent<br />
Commercial Fire panels. Includes 1 AA lithium battery, not field-replaceable. Up to 10-year battery life. Sensor must be returned to<br />
<strong>GE</strong> <strong>Security</strong> for battery replacement.<br />
60-924-3 Simon 3 TouchTalk Two-Way Talking Touchpad: Integrated two-way RF signal verification. Provides operational control of the<br />
panel. Not compatible with Simon 2.0 or Simon 1.0. Batteries included.<br />
60-924-3-01 Dialog QS1500 TouchTalk <strong>Inter</strong>active Touchpad: Allows the use to arm, disarm, activate panic alarms, check system status, control<br />
lights and hear voice feedback. The touchpad has two operating modes: key mode, which is compatible with Simon 3 panels<br />
version 3.3 and later; and chime mode, compatible with Simon 3 panels 4.1 and later.<br />
60-925 Allegro Panel Backup Battery: Included with Allegro control panel.<br />
60-927 Accessory Box, Cellular Backup, White: For use with Cellular Backup Modules.<br />
60-928 Multi-Purpose Housing: Rugged plastic enclosure designed to hold a variety of circuit boards. It can be adapted for many different<br />
installation situations.<br />
60-930-95R<br />
Apartment Manager Keychain Touchpad: Designed to be used by apartment managers or service people to disarm any Allegro<br />
system within a complex. The apartment manager can program up to 250 uses (disarms) for the keychain touchpad. A<br />
maintenance code is entered by the apartment manager or service person in an apartment protected by Allegro, after disarming the<br />
panel with the keychain touchpad. Battery included.<br />
60-938 Ethernet <strong>Inter</strong>face Module: Provides the ability to control and monitor a Simon system (version 4.0 and higher) using<br />
premisesconnect.com. Module connects to a DSL or cable modem (broadband) and reports events to the premisesconnect.com<br />
website. Ethernet cable not included. May also be used for TCP/IP alarm reporting with an Osborne-Hoffman receiver.<br />
60-960-95 Concord Ultra Control Panel: 96-zone integrated wireless/hardwire panel. Includes 96 wireless zones and 8 hardwire zones. Also<br />
includes X10 (power line carrier) card, Phone Line Monitor card, Phone <strong>Inter</strong>face Module, phone cord, lock set. On-board crystal<br />
receiver is compatible with crystal sensors only. Requires SuperBus 2000 peripherals. Battery and transformer sold separately; see<br />
the accessories section.<br />
60-961 Power Supply Replacement Kit: Includes a CareGard transformer with molded-in power cord and attached connectors for easy<br />
installation. Enables dealers to repair a CareGard with a damaged power cord or transformer.<br />
60-966 CareGard Refurbishment Kit: Includes a CareGard panel cover and a Wristwatch Panic Button accessory kit. For dealers who<br />
lease systems, this kit helps refurbish a returned panel and Wristwatch Panic Button.<br />
60-967 CareGard Remote Programmer: Software application that allows CareGard to be programmed from a PC. Uploads and downloads<br />
new information and updates existing information. Easy, menu-driven interface with on-line help.<br />
60-968 Help Button Accessory Kit: Includes plastic adaptors, fittings and wristbands for the Crystal or SAW Micro Wristwatch Panic<br />
Buttons, part numbers 60-906-95 or 600-1011-95R.<br />
60-971 Simon Wireless Gateway Module: Provides the ability to control and monitor a Simon system (version 3.5 or later) using an internet<br />
web site. A wireless data transceiver on the module provides the link from the Simon system to the web site through a wireless 2-<br />
way paging network. Service available through a third party provider at additional cost. Service not available in all areas.<br />
60-972 Line Carrier (X10) Power Supply Replacement Kit: Includes CareGard Line Carrier Transformer with molded-in power cord.<br />
Enables addition of X10 modules that flash lamps during medication reminders and no activity warnings.<br />
60-978 LineGrabber Line Seizure Module: The LineGrabber module easily attaches to existing telephone devices, providing a simple<br />
solution to line seizure needs in homes with more than one telephone device.<br />
60-979 CareGard Table Top Display Kit: This Point-of-Purchase display includes a freestanding acrylic frame with a brochure pocket and<br />
50 brochures, an 11" x 16" CareGard poster that fits in the frame, the 24" x 36" CareGard poster and a freestanding acrylic watch<br />
stand for displaying the wrist panic (wrist panic not included).<br />
60-982-95R<br />
Allegro Dialog Remote Station: A wireless, wall-mount remote station designed to provide remote security system control and status<br />
checking. It allows the user to arm and disarm, check system status and activate police, auxiliary and fire panic alarms. It features<br />
an LCD display, armed and ready LEDs and includes a built-in siren.<br />
60-983 ATP1000 Alphanumeric Touchpad: Large 2x16 liquid crystal display with adjustable contrast and brightness. Swing-down,<br />
removable door. Police, fire and auxiliary panic buttons. Allows for on-site installer programming.<br />
60-984 ATP2600 Flip Top Alphanumeric LCD Touchpad.<br />
60-985 ATP2100 Alphanumeric LCD Touchpad.<br />
60-990 Current Loop Converter: Lets an asynchronous RS232 device communicate with a 20 mA current loop device.<br />
610P<br />
N/A - Power Adapter, 117VAC In, 12VAC Out<br />
613P<br />
N/A - Power Adapter, 100-240VAC In, 13.5VDC Out<br />
614P<br />
N/A - Power Adapter, 100-240VAC In, 13.5VDC 2.7A Out<br />
6155AL-N<br />
SharpShooter Fresnel PIR Motion Sensor, Latching LED, LED stays lit after alarm, until reset<br />
6155CT-N<br />
SharpShooter Fresnel PIR Motion Sensor, Closed Loop, Form A, Cold Temp, Minus 40° F to plus 120° F temperature range<br />
6155-N SharpShooter Fresnel PIR Motion Sensor, Closed Loop, Form A<br />
6155XT-N<br />
SharpShooter, Fresnel PIR Quad motion sensor, Extended Temperature, Normally Closed<br />
6157CT-N<br />
SharpShooter Fresnel PIR motion sensor SPDT and Cold Temperature, Minus 40° F to plus 120° F temperature range<br />
6157-N SharpShooter Fresnel PIR Motion Sensor, Form C Relay<br />
6179-N Adjustable Timer, 12 or 24 V, AC/DC. SPDT. Adjustable 0-90 seconds<br />
6187CTX-N<br />
Industrial/Outdoor SharpShooter, Die-cast aluminum housing with gasket for rugged installations. Indoor or outdoor applications.<br />
Water resistant. Minus 40° F to plus 120° F. 45’ x 90° standard coverage. Includes standard lens, Long Range lens and Vertical<br />
Barrier lens. White<br />
6197-N Intrinsically Safe PIR System<br />
6198-N Non-Incendive PIR Motion Sensor, White<br />
6255FM-W<br />
SureShot Flush Mount Fresnel PIR Motion Sensor, For Prewire or flush mount locations, normally closed. 30’ x 90° range<br />
6255-W SureShot Fresnel PIR Motion Sensor, 30’ x 90° range, normally closed<br />
6257FM-W<br />
SureShot Flush Mount Fresnel PIR Motion Sensor, For Prewire or flush mount locations, SPDT. 30’ x 90° range, tamper<br />
6351-W DesignLine SharpShooter Fresnel PIR Motion Sensor, 35’ x 90° standard coverage. Includes standard lens, Pet Alley lens and<br />
Vertical Barrier lens. Form A. White<br />
701U<br />
6” Mounting Base for 711U and 711UT, 6” base, 3 terminals<br />
701U-10PK<br />
6” Mounting Base for 711U and 711UT, 10/pack, 10-pack of 701U<br />
702E-10PK<br />
4" Universal mounting base 700 series 10/pack, 4" universal mounting base with 6 terminals for all heads