VRM Video Recording Manager - Bosch Security Systems
VRM Video Recording Manager - Bosch Security Systems VRM Video Recording Manager - Bosch Security Systems
10 en | Used icons VRM Video Recording Manager 5 Used icons VRM Server Failover VRM Server iSCSI storage device Save Click to apply and save your changes. Online Help... Click to display the Online Help. Device is available. Device cannot be accessed. Devices that cannot be accessed, for example because the network connection has been interrupted, are indicated by a red cross. Device is password-protected. Devices that are protected by a password are indicated by a padlock until you have authenticated yourself for the device. Device is busy. Devices for which actions are being carried out are indicated by an egg timer until they become available again. Device has an error. Devices for which an error has been identified are indicated by a yellow triangle containing an exclamation mark. Device is in ANR mode. Devices in ANR mode are indicated by a half-filled square with rounded corners. While a network connection exists, the filling is green; otherwise, it is gray. Camera is available. Camera cannot be accessed. Cameras that cannot be accessed, for example because the network connection has been interrupted, are indicated by a red cross. Camera is password-protected. Cameras that are protected by a password are indicated by a padlock until you have authenticated yourself for the camera. Camera is busy. Cameras for which actions are being carried out are indicated by an egg timer until they become available again. Camera has an error. Cameras for which an error has been identified are indicated by a yellow triangle containing an exclamation mark. Camera is in ANR mode. Cameras in ANR mode are indicated by a half-filled square. While a network connection exists, the filling is green; otherwise, it is gray. DOC | V.2.21 | 2011.12 Operator's Manual Bosch Sicherheitssysteme GmbH
VRM Video Recording Manager Getting started | en 11 6 Getting started The Configuration Manager program is used to set and adjust the VRM system. The program can be installed on any PC with network access to the computer on which VRM Server has been started and to the devices that are to be managed. 6.1 Starting VRM Monitor 1. Start Internet Explorer on a PC that has network access to the VRM Server computer. 2. In the address bar, enter the IP address of the VRM Server computer and press . If you are starting VRM Monitor on the VRM Server computer, enter the IP address for the localhost followed by the port number if the port number is not 80: http://127.0.0.1:/ 3. Access to VRM Monitor is only possible for authorized persons. For this reason you will now be prompted to log on using your user ID. If you do not have the appropriate rights, you cannot view any recordings. CAUTION! Treat your logon details as confidential. Ensure that the password is not saved in the browser. The functions described in the following sections are now available. On the left-hand side, you will see the navigation bar. Click the appropriate entry. The information is displayed on the right-hand side. 6.2 Starting Configuration Manager To start the program: Click Start, point to Programs, point to Bosch Configuration Manager, and then click Configuration Manager. CAUTION! If a computer on which VRM Server is started is simultaneously accessed by multiple Configuration Manager programs, this can result in an inconsistent VRM configuration. Ensure that different people do not make changes to the configuration at the same time. 6.3 Enabling the Cameras tab Main window > System tab Enable the Cameras tab, when it is not displayed. 1. Expand the Applications folder. 2. Click Configuration Manager. 3. Click the Appearance tab. 4. Click to check the Show ’Cameras’ tab check box. 5. Restart Configuration Manager. Bosch Sicherheitssysteme GmbH Operator's Manual DOC | V.2.21 | 2011.12
- Page 1: VRM Video Recording Manager Version
- Page 4 and 5: 4 en | Table of Contents VRM Video
- Page 6 and 7: 6 en | System overview VRM Video Re
- Page 8 and 9: 8 en | Installation VRM Video Recor
- Page 12 and 13: 12 en | Configuring a VRM system VR
- Page 14 and 15: 14 en | Configuring a VRM system VR
- Page 16 and 17: 16 en | Configuring a VRM system VR
- Page 18 and 19: 18 en | Managing user groups and pe
- Page 20 and 21: 20 en | Configuring Automatic Netwo
- Page 22 and 23: 22 en | User interface VRM Video Re
- Page 24 and 25: 24 en | User interface VRM Video Re
- Page 26 and 27: 26 en | User interface VRM Video Re
- Page 28 and 29: 28 en | User interface VRM Video Re
- Page 30 and 31: 30 en | User interface VRM Video Re
- Page 32: 32 en | Index VRM Video Recording M
10 en | Used icons <strong>VRM</strong> <strong>Video</strong> <strong>Recording</strong> <strong>Manager</strong><br />
5 Used icons<br />
<strong>VRM</strong> Server<br />
Failover <strong>VRM</strong> Server<br />
iSCSI storage device<br />
Save<br />
Click to apply and save your changes.<br />
Online Help...<br />
Click to display the Online Help.<br />
Device is available.<br />
Device cannot be accessed.<br />
Devices that cannot be accessed, for example because the network<br />
connection has been interrupted, are indicated by a red cross.<br />
Device is password-protected.<br />
Devices that are protected by a password are indicated by a padlock until<br />
you have authenticated yourself for the device.<br />
Device is busy.<br />
Devices for which actions are being carried out are indicated by an egg timer<br />
until they become available again.<br />
Device has an error.<br />
Devices for which an error has been identified are indicated by a yellow<br />
triangle containing an exclamation mark.<br />
Device is in ANR mode.<br />
Devices in ANR mode are indicated by a half-filled square with rounded<br />
corners. While a network connection exists, the filling is green; otherwise, it<br />
is gray.<br />
Camera is available.<br />
Camera cannot be accessed.<br />
Cameras that cannot be accessed, for example because the network<br />
connection has been interrupted, are indicated by a red cross.<br />
Camera is password-protected.<br />
Cameras that are protected by a password are indicated by a padlock until<br />
you have authenticated yourself for the camera.<br />
Camera is busy.<br />
Cameras for which actions are being carried out are indicated by an egg<br />
timer until they become available again.<br />
Camera has an error.<br />
Cameras for which an error has been identified are indicated by a yellow<br />
triangle containing an exclamation mark.<br />
Camera is in ANR mode.<br />
Cameras in ANR mode are indicated by a half-filled square. While a network<br />
connection exists, the filling is green; otherwise, it is gray.<br />
DOC | V.2.21 | 2011.12 Operator's Manual <strong>Bosch</strong> Sicherheitssysteme GmbH
Change language