Valco Fittings - infochroma ag
Valco Fittings - infochroma ag
Valco Fittings - infochroma ag
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ACTUATORS AND ACCESSORIES<br />
Microelectric Actuators for Selectors<br />
Microelectric actuators<br />
for selectors<br />
Standard volt<strong>ag</strong>e 24 VDC. Includes autosensing 24 VDC power supply.<br />
Standoff version includes a 2" standoff. 3", 4", and 6" standoffs are also available.<br />
Consult the chart below to determine which actuator model is best suited for your valve.<br />
With keyed With keyed For use with<br />
closemount 2" standoff existing<br />
assembly assembly standoff<br />
Description Prod No Prod No Prod No<br />
High speed actuator E MH EMH2 EMHS<br />
High torque actuator E MT E MT2 EMTS<br />
WHICH MODEL FOR WHICH SELECTOR<br />
Valve<br />
Actuator<br />
model<br />
model<br />
<strong>Valco</strong><br />
All valves<br />
E MT<br />
Cheminert high pressure<br />
C5 4, 6 positions E MH<br />
8, 10 positions E MT<br />
C75NX<br />
E MH<br />
C75H<br />
E MH<br />
Cheminert low pressure<br />
C25Z<br />
C25<br />
C35Z<br />
C45<br />
E MH<br />
E MH<br />
E MH<br />
E MT<br />
TECH TIP<br />
Multi-drop cables permit a single serial port<br />
(RS-232) to control multiple microelectric<br />
actuators.<br />
MICROELECTRIC<br />
ACTUATOR<br />
CONTROL MODULE<br />
RS-232<br />
INTERFACE<br />
CABLE<br />
MULTIDROP CABLE<br />
(I-22397-03)<br />
ABOUT STANDOFFS<br />
Keyed standoff assemblies are used with selector<br />
(multiposition) microelectric actuators, to key the<br />
valve body to the actuator and standoff so that<br />
the actuators can self-align and operate valves<br />
with any number of positions.<br />
<strong>Valco</strong> selectors are not keyed unless ordered with<br />
a microelectric actuator. To install a microelectric<br />
actuator on an existing <strong>Valco</strong> selector, the key (pin)<br />
must be removed from the actuator clamp ring<br />
assembly. This can be done easily with a pair of<br />
pliers.<br />
See p<strong>ag</strong>e 207, top and bottom illustrations, for<br />
drawings of keyed standoff assemblies with<br />
multiposition microelectric actuators.<br />
Composite version<br />
High speed actuator ECMH ECMH2 ECMHS<br />
High torque actuator ECMT ECMT2 ECMTS<br />
RS-232 interface cable<br />
Description<br />
Prod No<br />
RS-232 interface cable I-22697<br />
Multi-drop cables<br />
for multiple microelectric actuators<br />
Multi-drop cables permit a single serial port (RS-232) to control multiple<br />
microelectric two position and selector actuators. Cables have one female<br />
DB9 and 2 to 8 male DB9 connectors – approximately 6" long.<br />
Note: The RS-232 interface cable (I-22697), above, is required for each actuator.<br />
No. of actuators Prod No<br />
to be controlled<br />
2 I-22897-02<br />
3 I-22897-03<br />
4 I-22897-04<br />
5 I-22897-05<br />
6 I-22897-06<br />
8 I-22897-08<br />
Plug-and-play cables<br />
for multiposition microelectric actuators<br />
Plug-and-play cables will allow a direct connection and control betweeen<br />
a specific instrument and the microelectric multiposition actuator. Contact<br />
technical support for other instruments.<br />
BCD cable<br />
Multiposition microelectric actuator to<br />
Agilent 6890 GC<br />
Agilent 6890 Network GC<br />
Agilent 7890 GC<br />
For 4 and 6 column selector * (p<strong>ag</strong>e 173)<br />
Remote cable<br />
Multiposition microelectric actuator to<br />
Agilent 1100 LC<br />
Waters Alliance LC<br />
For 8 and 10 column selector * (p<strong>ag</strong>e 173)<br />
Remote cable<br />
Multiposition microelectric actuator to<br />
Agilent 1100 LC<br />
Waters Alliance LC<br />
* Requires a specific software setting in the actuator control module<br />
Prod No<br />
V-EMPMCR-HP6890<br />
V-EMPMCR-HP6890N<br />
V-EMPMCR-HP6890N<br />
V-EMPMCR-HP1100<br />
V-EMPMCR-WA2690<br />
V-EMPMCR-HP1100-10<br />
V-EMPMCR-WA2690-10<br />
www.vici.com | <strong>Valco</strong> Instruments Co. Inc. Sales: 800–367–8424 Fax: 713–688–8106 | 191