Car Configurator V4.0 Localisation Guide - Toyota

TME Car Configurator 4.0 – Localisation Guide
5. If the CTA does not refer to one of the dynamic pages, change the target to _blank
6. Close and Save the components
3.4.1.2 Enabling or disabling the CTA’s:
1. Browse to the folder: \Building Blocks\Content\Car
Configurator\configuration\{modelname}\Model\{modelname}\Top
2. Open the component Top – {modelname}
3. Scroll down to the field data
4. To remove a CTA: select the component in the field and click Remove
5. To add a CTA: Click on Insert
6. Browse to the folder: \Building Blocks\Content\Car
Configurator\configuration\{modelname}\Model\{modelname}\Top\CTA
7. Select the component you want to add
8. Click on Ok
9. Click on Save and Close
3.4.1.3 Adding the Top component to the model component
1. Browse to the folder: \Building Blocks\Content\Car
Configurator\configuration\{modelname}\Model\{modelname}
2. Open the component {modelname}
3. Scroll down to the field data
4. Click on Insert
5. Browse to the folder: \Building Blocks\Content\Car
Configurator\configuration\{modelname}\Model\{modelname}\Top
6. Select the component Top - {modelname}
7. Click on Ok
8. Click Close and Save
3.4.1.4 Publish the Car Configurator page:
1. Navigate to the following structure group:\root\car-configurator\
2. Publish the index.tmex page
Confidential TME - Information Technology Group, 2010 Page 48