You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MANUAL FOLD PLATES<br />
Section 12<br />
Stop Screws - Deflector<br />
Deflector Fingers<br />
Upper Front Rail Blades<br />
Fingers & Blades Flush<br />
Fold Plate Deflector Stop Position ............................. Fig 12.13<br />
12.4 .....Fold Plate - Deflector Stop<br />
The deflector must stop in the correct position when moved fully<br />
forward to deflect. This position is controlled by the deflector stop<br />
screws, which should be adjusted so that the most forward edges<br />
of the deflector fingers and the upper front rail blades, are flush.<br />
Note ........The deflector must first be set parallel to the upper rail as<br />
described in the previous section. (12.3).<br />
SYSTEMS PAGE 33