You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Section 12<br />
FOLD PLATES<br />
SERVICE<br />
Locking Screw<br />
Adjusting Screw<br />
Upper Rail<br />
Jacking Screw<br />
Lower Rail<br />
Fold Plate - Lower Rail Adjustment .............................Fig 12.11<br />
12.1 .....Fold Plate - Lower Rail Adjustment<br />
Plate Shown Up-side Down<br />
The fold plate lower rail on each fold plate may be adjusted to<br />
reduce the gap between the upper and lower rails or may be<br />
moved closer to, or further away from, the fold rollers.<br />
If heavy stock sticks in the fold plate without folding ( providing the<br />
rollers are set correctly ) this may indicate that the lower rail has<br />
been set too close to the fold rollers.<br />
If light stock does not enter the fold plate, has a very small fold, or<br />
damage to the lead edge, this may indicate that the lower rail has<br />
been set too far away from the fold rollers.<br />
PAGE 30<br />
FOLDING