You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Section 9<br />
CENTRE FOLD ROLLER<br />
SERVICE<br />
Calliper Cable<br />
‘Tee’ Handle<br />
Grub Screw - Cable Clamp<br />
Fixed Calliper Plate - Inner<br />
Fold Roller - (Top)<br />
Main Roller - (Centre)<br />
Fold Roller - (Bottom)<br />
Drive Pulley -<br />
Main Roller<br />
Cable Clamp Screw - Cam<br />
Drive Belt -<br />
Toothed<br />
Centre Roller .............................................................. Fig 9.11<br />
9.1 .......Centre Fold Roller - Removal<br />
Having removed the fold rollers, the centre roller is removed to the<br />
operator side as follows:<br />
Remove the drive belt and large pulley from the drive side.<br />
Remove all cable clamp screws and remove both cables from<br />
machine.<br />
On the operator side remove all the gears and the nine bolts<br />
securing the fixed calliper plates. (See fig 10.11)<br />
The fixed calliper on the operator side, together with the centre<br />
roller, may then be carefully removed from the machine leaving<br />
both upper and lower perforator shafts in position.<br />
PAGE 24<br />
FOLDING