You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MANUAL FEED DRIVE GEARBOX Section 7<br />
7.2 .......Gearbox Drive Belt<br />
With the gearbox removed from the machine, remove the four<br />
screws securing the gearbox cover.<br />
Ease off the idler side bearing housing from the shafts.<br />
Note ........Take care of disc springs on disassembly.<br />
Slacken off the idler pulley, place a new belt over the pulleys, and<br />
replace the bearing housing on to the shafts, ensuring that the disc<br />
springs are correctly installed.<br />
Replace the gearbox cover and adjust the idler pulley to remove<br />
any slack in the belt.<br />
Note ........ Do not over-tension the belt as this will cause premature<br />
failure and overload the motor.<br />
SYSTEMS PAGE 17