You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Section 7<br />
FEED DRIVE GEARBOX<br />
SERVICE<br />
Gear-Box<br />
Belt - Toothed<br />
+ -<br />
Idler - Belt<br />
Tensioner<br />
Gear-Box Cover<br />
Cover Fixing<br />
Screws<br />
Bearing Housing - Idler Side<br />
Feed Drive Gearbox .................................................... Fig 7.11<br />
7.1 .......Feed Drive Gearbox - Removal<br />
The gearbox is removed from the underside of the feed bed as<br />
follows:-<br />
Remove the motor drive belt cover (see section 6).<br />
Release all the cable ties securing the rotation sensor cable.<br />
Remove the four screws securing the gearbox to the feedbed.<br />
Note ........ Take care not to lose the torque discs from the couplings.<br />
(See Fig. 6.11)<br />
PAGE 16<br />
FOLDING