thermal energy metering system - general catalogue

5
Thermal energy metering – GE555 user modules with distribution manifolds
GE555 USER MODULES WITH DISTRIBUTION MANIFOLDS.
User modules to be used for the direct measurement of the thermal energy consumption in centralized systems having zone distribution. The components
are installed inside painted sheet cabinets, available in 2 dimensions. They have a 3-way motorized zone valve having a 24V~ or 230 V~ motor. The connections
are in size 3/4”. The units can be used either for heating or for conditioning due to the double register energy counters (to be ordered separately). Units
dedicated to sanitary water are possible, from one to three. The manifolds shall be ordered separately.
Cabinet dimensions:
Height = 930 mm (with feet), depth = 150 mm, see table for the width
To complete GE555 module, it is possible to order separately:
- GE552 thermal energy meter
- GE550 Units or preassembled groups, with thermostatic mixer, to measure the consumption of hot and/or cold sanitary water and grey waters
- K270 or K272 motor to drive the zone valve
- Components for the data consumption centralization and remote control through M-Bus
Part numbers CONNECTIONS ZONE VALVE
CABINET WIDTH
mm
MAX NUMBER
OF MANIFOLD UNITS
GE555Y406 3/4” 3 ways 850 4
GE555Y407 3/4” 3 ways 1000 8
GE555Y406-GE555Y407
GE552 Thermal energy meters.
Part numbers: GE552Y117 (volumetric 3/4” 0.6m3/h)
GE552Y115 (volumetric 3/4” 1.5m3/h)
GE550 units or preassembled groups for sanitary
water.
Units or preassembled groups for the measurement
of the consumption of the hot and cold sanitary
water and grey waters.
K270-K272 motor for zone valve.
Motor for zone valves having end stroke microswitch.
Part numbers: K270Y001 (230 V~ supply)
K270Y002 (24 V~ supply)
K272Y001 (230 V~ supply)
K272Y002 (24 V~ supply)
Distribution manifolds.
Distribution manifolds with 50 mm distance between
the axis.
Part numbers: R551S
R553S
R553M
R553V
R580