Body Side Molding Installation Instructions - Bernardi Acura Parts ...
Body Side Molding Installation Instructions - Bernardi Acura Parts ... Body Side Molding Installation Instructions - Bernardi Acura Parts ...
12. Press on the left rear body side molding firmly with the palm of your hand while removing the adhesive backings. Remove about 2 to 4 inches at a time. 2 ADHESIVE BACKINGS (Remove slowly.) LEFT REAR DOOR LEFT REAR BODY SIDE MOLDING 13. Using the rubber roller, apply firm pressure while rolling to set the adhesive. LEFT REAR BODY SIDE MOLDING RUBBER ROLLER (ESQE54D) LEFT REAR DOOR REAR TEMPLATE (Remove.) 14. Remove the rear template. 15. Turn the templates over and repeat steps 1 thru 14 to install the body side moldings on the right side of the vehicle. 4 of 4 BII 44976 (1011) © 2010 American Honda Motor Co., Inc. – All Rights Reserved.
- Page 1 and 2: Accessory Application Publications
- Page 3: 6. Using the rubber roller, apply f
12. Press on the left rear body side molding firmly with<br />
the palm of your hand while removing the adhesive<br />
backings. Remove about 2 to 4 inches at a time.<br />
2 ADHESIVE BACKINGS<br />
(Remove slowly.)<br />
LEFT REAR<br />
DOOR<br />
LEFT REAR BODY<br />
SIDE MOLDING<br />
13. Using the rubber roller, apply firm pressure while<br />
rolling to set the adhesive.<br />
LEFT REAR BODY<br />
SIDE MOLDING<br />
RUBBER<br />
ROLLER<br />
(ESQE54D)<br />
LEFT REAR<br />
DOOR<br />
REAR TEMPLATE<br />
(Remove.)<br />
14. Remove the rear template.<br />
15. Turn the templates over and repeat steps 1 thru 14<br />
to install the body side moldings on the right side of<br />
the vehicle.<br />
4 of 4 BII 44976 (1011) © 2010 American Honda Motor Co., Inc. – All Rights Reserved.
Change language