30.01.2015 Views

Body Side Molding Installation Instructions - Bernardi Acura Parts ...

Body Side Molding Installation Instructions - Bernardi Acura Parts ...

Body Side Molding Installation Instructions - Bernardi Acura Parts ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

6. Using the rubber roller, apply firm pressure while<br />

rolling to set the adhesive.<br />

10. Peel back approximately 1½ inches of the adhesive<br />

backing from each adhesive strip, and tape the<br />

ends to the front surface of the body side molding.<br />

Remove the small end pieces of adhesive backing.<br />

LEFT FRONT DOOR<br />

LEFT FRONT BODY<br />

SIDE MOLDING<br />

4 ADHESIVE BACKINGS<br />

(Peel back 1½ inches<br />

and tape them to the<br />

front surface of the<br />

body side molding.)<br />

ADHESIVE<br />

BACKING<br />

(Remove.)<br />

MASKING TAPE<br />

FRONT<br />

TEMPLATE<br />

(Remove.)<br />

RUBBER<br />

ROLLER<br />

(ESQE54D)<br />

790211AT<br />

ADHESIVE<br />

BACKING<br />

(Remove.)<br />

LEFT REAR BODY<br />

SIDE MOLDING<br />

7. Remove the front template.<br />

8. Position the left rear template on the door, and align<br />

its edges with the edges of the left rear door. Secure<br />

the template with masking tape as shown.<br />

LEFT REAR DOOR<br />

790207BT<br />

11. Align the edges of the left rear body side molding<br />

with the edges of the rear template as shown, and<br />

install the left rear body side molding on the left rear<br />

door.<br />

LEFT REAR BODY<br />

SIDE MOLDING<br />

ATTACHING<br />

POSITION<br />

(Clean using one<br />

alcohol pad.)<br />

LEFT<br />

REAR<br />

DOOR<br />

Align the front edge<br />

of the molding<br />

as shown.<br />

Align the bottom edge<br />

of the molding with the<br />

top of the template.<br />

Align.<br />

REAR<br />

TEMPLATE<br />

LEFT REAR BODY<br />

SIDE MOLDING<br />

EDGE OF LEFT<br />

REAR DOOR<br />

Align.<br />

790206CT<br />

9. Clean the door surface where the left rear body side<br />

molding will attach using one alchol pad. Allow the<br />

alcohol to dry.<br />

REAR TEMPLATE<br />

790208DT<br />

© 2010 American Honda Motor Co., Inc. – All Rights Reserved. BII 44976 (1011) 3 of 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!