GF_9443_-_Final.pdf - MTU Detroit Diesel Australia
GF_9443_-_Final.pdf - MTU Detroit Diesel Australia
GF_9443_-_Final.pdf - MTU Detroit Diesel Australia
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PRODUCT DATA SHEET<br />
Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant contains proprietary Organic Additive<br />
Technology (OAT). This product is free of ethylene glycol, silicates, phosphates,<br />
borates, nitrates, nitrites and amines. It is fully compatible with other similarly<br />
formulated OAT coolants. Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant provides excellent<br />
cooling system protection for petrol, diesel and gas engines in contruction<br />
and industrial, mining, power generation, rail, truck and bus and agricultural<br />
applications. Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant provides excellent protection for<br />
aluminium and cast iron surfaces. Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant offers the<br />
following advantages:<br />
• Extended life - With proper cooling system maintenance Power Cool <strong>GF</strong><strong>9443</strong> Premix<br />
Coolant has an expected service life of up to 4 years/1,000,000 km or 12,000 hours<br />
whichever occurs first<br />
• Free from ethylene glycol, amine, borate, phosphate, nitrates, nitrites and silicate<br />
• Compatible with other long life organic additive technology (OAT) based engine<br />
coolants; for optimal performance it is recommended to flush the old coolant and<br />
replace entirely with Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant at your next service interval<br />
• Universal use; meets or exceeds industry standard requirements for both light and<br />
heavy-duty diesel applications<br />
• Suitable for underground mining applications where glycol is not permitted
PRODUCT DATA SHEET<br />
Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant meets or exceeds the performance requirements of<br />
the following engine coolant specifications:<br />
OEM/Agency<br />
Specification<br />
• ASTM • D-3306 / D-4985<br />
• AS/NZS • 2108:2004 “Type B”<br />
• SAE<br />
• JIS<br />
• GM - Dexcool<br />
• Renault<br />
• VW<br />
• J1034 / J1941<br />
• K2234<br />
• GM6277M<br />
• Type D<br />
• TL 774F<br />
• Peugeot • B71 5110<br />
For best results, Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant must NOT be mixed with conventional high pH,<br />
phosphate, borate, silicate containing coolants. The mixing of conventional coolants with Heavy Duty<br />
Radiator Inhibitor may result in a lower than expected lifetime (change-over intervals).<br />
Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant Performance Testing<br />
Coupon ASTM D 1384-94<br />
Glassware Corrosion<br />
ASTM D2570-94<br />
Simulated Service<br />
Type Tests Results1 Max. Spec. Tests Results1,2 Max. Spec.<br />
Copper 0.1 10 +1.5 20<br />
Solder 0.2 15 +13.7 60<br />
Brass 0.0 10 +2.2 20<br />
Steel 0.0 10 +4.9 20<br />
Cast Iron +1.9 10 +7.6 20<br />
Aluminium 5.1 15 +13.1 60<br />
1. Weight loss per coupon in milligrams<br />
2. Aluminium radiator results<br />
ASTM Test Procedure Test Results 1 Specification<br />
D4340-89 Heat Rejecting Aluminium Corrosion 0.1 mg/cm 2 /week 1.0 maximum<br />
D2809-94 Aluminium Water Pump Cavitation-Erosion<br />
Corrosion (rating from 1 to 10)<br />
1. Weight loss per coupon in milligrams<br />
9 8 minimum
PRODUCT DATA SHEET<br />
Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant Physical and Chemical Properties<br />
Test Performance Test Method<br />
pH 7.5 – 9.0 ASTM D-1287<br />
Specific gravity (15.6ºC/60ºF) 1.01 to 1.02 ASTM D-1122<br />
Foam Volume (mL) 50 max. ASTM D-1881<br />
Foam Break time (sec) 5 max. ASTM D-1881<br />
Ash content (wt. %) 5 max. ASTM D-1119<br />
Odour<br />
Colour<br />
Shelf Life<br />
Characteristic<br />
Green<br />
5 years minimum<br />
Total Glycols (wt. %) 0%<br />
Chloride (ppm) 25 max. ASTM D-3634<br />
Silicon (ppm) < 10<br />
Boron (ppm) < 10<br />
Phosphorous (ppm) < 10<br />
The performance and physical property data described for this product are presented in good faith and believed to be reliable;<br />
however, they should be considered as typical results and not as sales specifications<br />
Power Cool <strong>GF</strong><strong>9443</strong> Premix Coolant provides exceptional value as an aluminium and cast iron<br />
compatible, long life engine coolant. For coolant top up use Power Cool <strong>GF</strong><strong>9443</strong> Premix coolant,<br />
DO NOT add just water as this will dilute the corrosion inhibitor package.<br />
For more information on Power Cool for your application please contact<br />
<strong>MTU</strong> <strong>Detroit</strong> <strong>Diesel</strong> <strong>Australia</strong> on 1300 <strong>MTU</strong> <strong>Detroit</strong> (1300 688 338)<br />
Notice: Because use conditions and applicable laws may differ from one location to another and may change with time, the customer is responsible<br />
for determining whether products and the information in this document is appropriate for their use and for ensuring that their workplace and disposal<br />
practices are in compliance with applicable laws and other governmental enactments. Power Cool’s warranty is limited to the claims of product meeting<br />
stated specifications. It is the responsibility of the end user to determine product suitability as recommended in the Owner’s Manual and to follow engine<br />
manufacturer’s instructions.
Change language