LED-Panel C100

LED-Panel C100
400 individually controlled,
high-bin, color-calibrated
Nichia-RGB LEDs backlight a
40x40 in. surface.
A new kind of surface light,
providing uniform multimedia
backlighting of surfaces from a
short distance.
Highlight, accent, or animate
stages, exhibition booths, and
TV studios with colored surfaces,
video effects, or still pictures.
Large surfaces can be covered
quickly and easily.
The panel features convection
cooling for noise-free operation.
Each panel consists of 25
C50 tiles in a rugged aluminum
housing.
The panel can be driven by most
lighting consoles and media
servers through on-board DMX
IN/THRU or ArtNet IN via Neutrik
EtherCON.
The Panel can also be driven via
video with a DVI or SDI input
when used in conjunction with
the Pixel-Gate controller.

LED-Panel C100
Features
· 400 individually controlled
Nichia-RGB LEDs
· High-bin and color calibrated
· Multimedia controllable over
DMX/ArtNet
· Uniform illumination at a
distance of 3 in (8 cm)
· Smooth dimming with patented
Lehmann modulation
· Available with black front plate
Optical
· Number of LEDs: 400 Nichia
RGB LEDs in a 50 mm pitch
· Viewing angle: approx. 115°
· Backlight area: 39x39 in
(100x100 cm)
· Life expectancy: min. 25,000
hours at an ambient temperature
of 32-104°F (0-40°C)
· Permitted temperature range:
32-104°F (0-40 °C)
· Dominant wavelength: Red:
623 nm, Green: 527 nm,
Blue: 468 nm
Electrical
· Convection cooling (fanless)
· Number of channels: 3, 12, 15, 30,
48, 75, 300, 1200
· Protocol: ArtNet and DMX512
(optically isolated)
· Connectivity: 100-240VAC,
47-63Hz, 250W
Mechanical
· Dimensions (LxWxD):
39x39x2.75 in
(100x100x7 cm)
· Weight: 48.5 lb (22 kg)
System Accessories
· Rigging System
· Front plate (black)
Electrostatic Discharge (ESD) can damage sensitive electronic equipment. We recommend the use of anti-static bracelets when installing or servicing our products.
Also, the polishing of glass or plastic surfaces in the vicinity of our products should be avoided to prevent buildup of static electricity. Suitable anti-static packaging
materials should always be used to transport our products. Ordinary plastic packaging materials such as air-cushioned bags and bubble-wrap, are not suitable
alone. For safety reasons, only products and accessories designed by Schnick Schnack Systems GmbH should be used in conjunction with our LED components.
System specifications may change without notice. No part of this document may be reproduced without permission.
LITS3C100PANEL-060512