Air Navigation Pro 5.2 User Manual - Xample
Air Navigation Pro 5.2 User Manual - Xample
Air Navigation Pro 5.2 User Manual - Xample
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
If you want to get the aircraft`s attitude and banking in a real flight, <strong>Air</strong> <strong>Navigation</strong> must be<br />
installed on an iOS device with internal gyroscopes (iPad 3, Pad 2, iPone 4/4S).<br />
If it is not the case, <strong>Air</strong> Nav is prepared<br />
to work together with an external<br />
device known as AHRS G mini from<br />
Levil technology.<br />
The AHRS G mini can also share<br />
pressure, altitude and <strong>Air</strong>speed with<br />
<strong>Air</strong> <strong>Navigation</strong> if the sensors are active<br />
under “Tools” menu.<br />
Pressure and View mode<br />
<strong>Air</strong> <strong>Navigation</strong> 5 comes with the possibility of setting the QNH at the top of the Altitude<br />
indicator within the EFIS module. You can change it when in “Flight Mode”.<br />
Also, by pressing on the top bar (Compass<br />
indicator, as shown below on the image), you can<br />
toggle the screen view to Course/Heading<br />
mode. This will only work when using the AHRS g<br />
mini gadget.<br />
Note: If you split the screen on the iPad while using<br />
the EFIS module, you will always show the Route<br />
module and the Moving Map as the ONLY<br />
instruments.<br />
You can also turn the Elevation graph ON and you<br />
will see the Elevation data up to 10 NM ahead.<br />
Go back to index 47