Air Navigation Pro 5.2 User Manual - Xample

Record a Flight
The flight can be reproduced from within
the application by pressing on the desired
recorded flight in the «Tools» menu, where
the flights are stored.
In order to record a flight, you have to
enable the option «Flight recorder» in
the «Settings» menu. This should be
done before starting the flight.
Air Nav will start recording as soon as
the Block-Off time is set. You can find
this value, as it was explained on the
previous chapter, under the «Flight Time»
module.
When the Block-On time is finally set,
Air Nav will stop recording the flight and
it will be automatically stored in «Tools»
menu.
A KML file will be stored as well in one of
the Air Nav`s folders. This file can be
downloaded from the embedded
WebServer server and then opened on
Google Earth/Maps and see the flight`s
track (refer to «Advanced features» for more
info on how to connect to the Webserver)
Remember that you can set the values
manually or it can be set automatically
if the option «Automatic logbook» is
enabled in «Settings» as well.
Note: Besides having the chance to reproduce a
flight in Air Nav Pro, you can also send it by
email by selecting the option after pressing on a
desired one.
Go back to index 37