Air Navigation Pro 5.2 User Manual - Xample

Add an Aircraft profile
(Get ETA and total Fuel consumption)
Air Nav Por 5 offers the possibility to calculate the total
fuel consumption for the whole flight and the estimated
arrival time when you plan a route.
First of all, you will have to create an Aircraft profile. In
order to do that, you will press on «Aircraft» under
«Document Browser» menu and proceed to add a
New aircraft. You will be able to set the Aircraft`s
identification and choose an image (optional).
After completing with the ID, you will be taken back to
the window where your new Aircraft ID is created. In
order to enter more information about your Aircraft,
you should press on the BLUE-circled button on the
right side. Under “Manufacturer and model”, you will
be able to enter the Cruise Speed and the Fuel flow of
your Aircraft. This information is very important for Air
Nav to calculate the ETA and Fuel consumption.
From Air Nav Pro 5.2 onwards, a feature for
Weight and Balance has been added (refer to
«Weight and Balance» chapter for more details).
Should you wish to change speed or altitude units,
you can do it from the «Settings» panel.
Don`t forget to select your Aircraft. Once
selected, you should see a green mark on the left
side of the ID, as it is shown on the image above.
If you wish to send the Aircraft profile by e-mail,
should you do it through the button on the upper-right
corner.
Note: After creating a route, when
pressing on «Summary» within the
Route module, you will then be able
to see the ETA and the estimated
Fuel consumption for the whole
flight.
Go back to index 23