DS335 Synthesized Function Generator
DS335 Synthesized Function Generator
DS335 Synthesized Function Generator
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Performance Tests 4-5<br />
PERFORMANCE TESTS<br />
INTRODUCTION<br />
NECESSARY EQUIPMENT<br />
The procedures in this section test the performance of the <strong>DS335</strong>. The first<br />
set tests the basic functionality of the <strong>DS335</strong> from the front panel. The<br />
second set of tests actually measures the <strong>DS335</strong>'s specifications. The<br />
results of each test may be recorded on the test sheet at the end of this<br />
section.<br />
The following equipment is necessary to complete the tests. The suggested<br />
equipment or its equivalent may be used.<br />
Instrument Critical Specifications Recommended Model<br />
Analog Oscilloscope 350 MHz Bandwidth Tektronix 2465<br />
Time Interval Counter Frequency Range: 20 MHz minimum SRS SR620<br />
Time Interval Accuracy: 1ns minimum<br />
FFT Spectrum Analyzer Frequency Range: DC to 100 kHz SRS SR760<br />
Amplitude Accuracy: ±0.2 dB<br />
Distortion: < 75 dB below reference<br />
RF Spectrum Analyzer Frequency Range: 1 kHz to 100 MHz Anritsu MS2601/ HP4195A<br />
Amplitude: ±0.5 dB<br />
Distortion and Spurious: < -70 dB<br />
DC/AC Voltmeter 5 1/2 Digit DC accuracy Fluke 8840A<br />
True RMS AC to 100 kHz<br />
Thermal Converter Input Impedance: 50Ω Ballantine 1395A-3<br />
Input Voltage: 3 Vrms<br />
Frequency: DC to 10 MHz<br />
Accuracy: ±0.05dB<br />
10 MHz Frequency Standard Frequency: 10 MHz ± .001 ppm SRS FS700<br />
Phase Noise: < -130 dBc @ 100Hz<br />
50Ω Terminator 50Ω ± 0.2 %, 1 Watt HP 11048C<br />
Doubly Balanced Mixer Impedance: 50Ω Mini-Circuits ZAD-3SH<br />
Frequency: 1 - 20 MHz<br />
<strong>DS335</strong> <strong>Synthesized</strong> <strong>Function</strong> <strong>Generator</strong>