30.01.2015 Views

Administrator's Guide - Kerio Software Archive

Administrator's Guide - Kerio Software Archive

Administrator's Guide - Kerio Software Archive

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

22.7 Dial Log<br />

3. Disconnection caused by an error (connection is dropped)<br />

[15/Mar/2008 15:42:51] Line "Connection" dropped,<br />

connection time 00:17:07, 1519 bytes received,<br />

2504 bytes transmitted<br />

The items are the same as in the previous case (the second item — the disconnected<br />

report).<br />

4. Requested dialing (as a response to a DNS query)<br />

[15/Mar/2008 15:51:27] DNS query for "www.microcom.com"<br />

(packet UDP 192.168.1.2:4567 -> 195.146.100.100:53)<br />

initiated dialing of line "Connection"<br />

[15/Mar/2008 15:51:38] Line "Connection" successfully connected<br />

The first log item is recorded upon reception of a DNS request (the<br />

DNS module has not found requested DNS record in its cache). The log provides:<br />

• DNS name from which IP address is being resolved,<br />

• description of the packet with the corresponding DNS query (protocol, source IP<br />

address, source port, destination IP address, destination port),<br />

• name of the line to be dialed.<br />

Another event is logged upon a successful connection (i.e. when the line is dialed, upon<br />

authentication on a remote server, etc.).<br />

5. On-demand dialing (response to a packet sent from the local network)<br />

[15/Mar/2008 15:53:42] Packet<br />

TCP 192.168.1.3:8580 -> 212.20.100.40:80<br />

initiated dialing of line "Connection"<br />

[15/Mar/2008 15:53:53] Line "Connection" successfully connected<br />

The first record is logged when <strong>Kerio</strong> Control finds out that the route of the packet does<br />

not exist in the routing table. The log provides:<br />

• description of the packet (protocol, source IP address, destination port,<br />

destination IP address, destination port),<br />

• name of the line to be dialed.<br />

Another event is logged upon a successful connection (i.e. when the line is dialed, upon<br />

authentication on a remote server, etc.).<br />

6. Connection error (e.g. error at the modem was detected, dial-up was disconnected, etc.)<br />

[15/Mar/2008 15:59:08] DNS query for "www.microsoft.com"<br />

(packet UDP 192.168.1.2:4579 -> 195.146.100.100:53)<br />

initiated dialing of line "Connection"<br />

[15/Mar/2008 15:59:12] Line "Connection" disconnected<br />

295

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!