SPECIALTY AUTOMOTIVE TOOLS
SPECIALTY AUTOMOTIVE TOOLS
SPECIALTY AUTOMOTIVE TOOLS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPARK PLUG & IGNITION<br />
H1095 L<br />
2 PC DISTRIBUTOR CLAMP WRENCH<br />
• Use with any 3/8" drive ratchet or extension<br />
• It gets into those hard-to-reach distributor clamp bolts<br />
• Chrome plated, hardened tool steel<br />
Sizes: 1/2" & 9/16" Hex<br />
H1095<br />
H3126 L<br />
FORD IGNITION MODULE WRENCH<br />
• 2 tools in one<br />
• One end of wrench has a 7/32" (5.5mm) hex wrench used on most late model Ford cars &<br />
trucks. The other end is a T20 Torx® bit required for earlier models<br />
• Specifically designed with 25° offset and left or right hand ratcheting on both ends to assist in<br />
removal or installation of hard to get at Ford Ignition Modules without removing or tampering with<br />
the distributor<br />
H3126<br />
H1866<br />
IGNITION POINT & MACHINE FILES<br />
• These double cut ignition files are made from high quality steel with Rockwell hardness of 65.<br />
Easily cuts tungsten or platinum contact points<br />
• Used on ignition points, spark plugs, relays, circuit breakers and much more<br />
H1866<br />
H1005<br />
SPARK PLUG FIRING INDICATOR<br />
• Capacitive type spark plug firing indicator<br />
• No need to puncture cable. Clip alligator-clip to a clean ground, then simply hold on wire and check<br />
firing of bulb through slot in the side of the plastic tube<br />
H1005<br />
H1712<br />
SMALL ENGINE SPARK TESTER<br />
• Spark tester connects between the end of the spark plug wire and the spark plug itself. Crank engine.<br />
If ignition output is OK, the neon lamp in the tester will blink<br />
• Spark is totally contained. No danger of accidental shock or possible explosion from stray gas fumes<br />
• Engine will run with spark tester attached. Will not cause ignition cutout<br />
H1712<br />
H3143<br />
IN-LINE IGNITION SPARK TESTER<br />
• Connects in-line between spark plug and spark plug wire. Shows a duplicate view of the ignition<br />
spark. Technician can visually check condition of each cylinder<br />
• Frequency and intensity of flash pattern indicates whether there is an ignition or fuel delivery system<br />
problem. Flash can be seen in bright sunlight<br />
• Clear plastic body can withstand rough use and resists automotive chemicals<br />
• Flexible wire protected by mechanical strain relief<br />
• Instructions included<br />
H3143<br />
H3295 L<br />
ANGLED SPARK PLUG BOOT PLIERS<br />
• Designed to protect against plug wire and boot separation<br />
• Handle and jaws are vinyl coated to insure complete insulation and non slip-grip<br />
• Overall length: 9-3/4"<br />
Specialty Automotive Tools<br />
H3295<br />
SPARK PLUG & IGNITION<br />
59
Change language