SPECIALTY AUTOMOTIVE TOOLS

FASTENER
H1458
8 PC 3/8" DR. TRIPLE SQUARE BIT SOCKET SET
• Bit sockets are 3/8" sq. dr. with a black oxide tip, matte finish and made from SNCM 8660 steel
• For use on triple square fastener bolts typically found on European vehicles (especially German)
• For use on cylinder heads, axle shafts, rear toe adjusters, differentials, transmission drain plugs,
clutches, belly pans, brake calipers and more
• Other uses include: Detroit Diesel flywheel bolts, crank pullers on 900 &4000 series engine, and
headbolts on 900 series
• Bit sockets are NOT designed for use with power impact tools
Set contains:
H1458-10 4mm H1458-14 10mm
H1458-11 5mm H1458-15 12mm
H1458-12 6mm H1458-16 14mm
H1458-13 8mm H1458-17 16mm
H1458
CAUTION: Triple square bit sockets may strip the head of double hex bit fasteners found on many
Asian vehicles
H3056 L
UNIVERSAL LOCK RING PLIER
• Removes and installs lock rings used on brakes, transmissions, pedal shafts and clutch shafts
• The scored jaws hold rings securely
THREAD FILES
H1440 S.A.E. Coarse 11, 12 , 13, 14, 16, 18, 20, 24 (threads / inch)
H1441 S.A.E. Fine 9, 10, 12, 16, 20, 27, 28, 32 (threads / inch)
H1442 Metric 0.75, 1.0, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm
H3056
H1440 - H1442
RETHREADER DIE SETS
• Hex shape lets you use a common socket for a holder
• Will quickly and safely repair damaged threads on bolts or rods
• Each set packed on ball chain
H1344 7 PC Dies Coarse 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8
For replacement parts see H3573-10 to H3573-15
H1345 7 PC Dies Fine 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8
For replacement parts see H3573-23 to H3573-29
H1346 5 PC Dies Metric 6mm x 1.0, 7mm x 1.0, 8mm x 1.25,10mm x 1.50, 12mm x 1.50
Use H1346-11 for 7mm x 1.0 Die
For balance use replacements parts H3573-36 to H3573-41
H1344 - H1346
CAUTION: Do not use to cut new or hardened threads
4 PC STUD PULLER SETS
• Remove threaded studs without damaging the threads
• Use with ratchet, breaker bar or wrench
• Made from heat treated alloy steel
• 1/4", 5/16", 6mm, 8mm all 3/8" Sq. Drive & 3/4" (19mm) Hex Socket
• 3/8", 7/16", 10mm, 12mm all 1/2" Sq. Drive & 7/8" (22mm) Hex Socket
• Comes in a convenient blow mould storage case
H3569 LE* S.A.E. H3569-10 1/4" H3569-12 3/8"
H3569-11 5/16" H3569-13 7/16"
H3570 LE* Metric H3570-10 6mm H3570-12 10mm
H3570-11 8mm H3570-13 12mm
H3569 - H3570
Specialty Automotive Tools
FASTENER
51