SPECIALTY AUTOMOTIVE TOOLS
SPECIALTY AUTOMOTIVE TOOLS
SPECIALTY AUTOMOTIVE TOOLS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PULLERS<br />
H3104 LE*<br />
STEERING WHEEL – LOCK PLATE TOOL<br />
• A time saver for removing and installing lock plates on AMC / GM / Chrysler cars including tilt<br />
steering wheels and airbags<br />
• One tool handles both 9/16" - 18 and 14mm threads<br />
• Easy to use. Just a few turns puts the screw on the steering column. A turn of the wing nut and<br />
the lock plate is ready for release. Reverse the procedure to install<br />
H3104<br />
H1901 LE*<br />
HARMONIC BALANCER PULLER<br />
• Designed to pull balancers, vibration dampers, pulleys, or any tool with tapped holes<br />
Two or three hole applications<br />
• Floating swivel prevents damage to shaft ends<br />
• Range: 1-3/8" - 3-9/16"<br />
• 5 sets of side screws provided<br />
H3558 LE*<br />
HARMONIC BALANCER INSTALLER KIT<br />
• Ideal for installing or removing vibration dampers, balancers, pulleys and gears with tapped<br />
holes where evenly distributed force is required<br />
• Comes in convenient blow mould storage case<br />
Kit includes: one each of the following eight adaptors.<br />
• S.A.E. 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18, 3/4"-16<br />
• Metric M12 x 1.5, M14 x 1.5, M16 x 2.0<br />
H1901<br />
H3559 LE*<br />
6 PC HARMONIC DAMPER PULLEY PULLER SET<br />
WITH RETAINING RING<br />
• This compact tool eliminates the need to remove the radiator before removing the pulley<br />
• Unique design for easy access in confined engine compartment<br />
• The holding tool can be used to aid in the removal and installation of the crank bolt on most<br />
Chrysler, Hyundai and Mazda engines<br />
• Comes in a convenient blow mould case<br />
Applications:<br />
Cadillac<br />
• 1988 - 1992 with 4.5L V8<br />
• 1993 & later with 4.6L V8<br />
• 1991 - 1995 with 4.9L V8<br />
• Escalade with 6.0L V8<br />
Chrysler<br />
• 1995 & later Autos with 2.0L 4 Cylinder, 2.4L 4 Cylinder and 2.5L V6<br />
• 1998 & later Autos with 2.7L DOHC V6, 3.2L SOHC V6 and 3.5L SOHC V6<br />
• 1990 & later Vans with 3.3L V6<br />
• 1993 - 997 Autos with 3.3L and 3.5L V6<br />
• 1994 & later Vans with 3.8L V6<br />
• 1998 & later with 4.7L V8<br />
• 1994 & later Pick-ups with 8.0L V10<br />
GM<br />
• 2005 & later with 2.8L Straight 4 cylinder: Chevy Colorado, GMC Canyon<br />
• 2004 & later with 3.5L Straight 5 cylinder: Chevy Colorado, GMC Canyon<br />
• 2006 & later Hummer H3 with 3.5L Straight 5 cylinder<br />
• 2003 & later with 4.2L Straight 6 cylinder: Chevy Trailblazer, GMC Envoy, Olds Bravada<br />
• 2004 & later with 4.2L Straight 6 cylinder: Buick Rainier<br />
• 1997 & later with 5.7L V8 (Gen III): Camaro, Corvette, Firebird and Trans-Am<br />
• 2000 & later with Gen III trucks and SUV's with 4.8L V8, 5.3L V8, 6.0L V8 and 8.1L V8<br />
Mitsubishi<br />
• 1995 - 1999 with 2.0L DOHC non-turbo: Eclipse<br />
Oldsmobile<br />
• 1995 & later with 4.0L V8<br />
H3558<br />
H3559<br />
H1927 LE*<br />
GEAR AND PULLEY PULLER<br />
• Handy for pulling timing gears, fan pulleys, balancers, cam gears, etc<br />
• Sturdy cross arm, 1" square is 4-7/8" long<br />
• Center screw is 5-1/2" long with a 5/8"-18 thread<br />
• Two side screws provided are 3/8"-16.<br />
Specialty Automotive Tools<br />
H1927<br />
PULLERS<br />
45
Change language