SPECIALTY AUTOMOTIVE TOOLS
SPECIALTY AUTOMOTIVE TOOLS
SPECIALTY AUTOMOTIVE TOOLS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PULLERS<br />
H3556 LE*<br />
FRONT HUB PULLER & INSTALLER<br />
• Designed to remove and install most front wheel drive hubs for servicing wheel bearings,<br />
CV joints or transaxle<br />
• Kit includes one each: front hub remover, FWD front hub installer and Ford front hub installer<br />
• Comes in a convenient blow moulded case<br />
H3556<br />
H3553<br />
H3553 LE*<br />
3 PC REAR AXLE BEARING REMOVER SET<br />
• Extracts semi-floating rear axle bearings in most domestic vehicles<br />
• Use with 5/8" - 18 thread slide hammer for more torque and to avoid damage to rear axle<br />
or bearings<br />
• Comes in a convenient blow mould storage case<br />
Kit includes:<br />
• 1" ID minimum bearing tube and a 1-7/8" ID maximum axle tube<br />
• 1-5/16" ID minimum bearing tube and a 2-3/8" ID maximum axle tube<br />
• 1-3/8" ID minimum bearing tube and a 2-7/8" ID maximum axle tube<br />
• Over-all pulley length: 5-1/2"<br />
H1905<br />
H1905 L<br />
SMALL GEAR AND BEARING PULLER<br />
• Also use for battery terminals<br />
• Has a unique spring action that permits a one handed operation<br />
• Forces the jaws tighter as more pressure is applied to the pressure screw<br />
• Pressure screw has a protector on the end to prevent damage to the object pulled<br />
• The 1-1/4" capacity is ideal for small bearing, battery terminals and other small pulling jobs<br />
• All parts are plated for rust and corrosion protection<br />
H3567<br />
H3567 LE*<br />
15 PC STEERING WHEEL PULLER & LOCK<br />
PLATE COMPRESSOR SET<br />
• Everything you need to efficiently remove the steering wheel on most vehicles with<br />
conventional or tilt steering columns without damaging the steering wheel<br />
• Including some GM models with entertainment and climate control circuit boards<br />
• The lock plate compressor accesses the turn signal switch and S.I.R. modules on Chrysler,<br />
GM & AMC to compress the steering wheel in order to remove / install the snap ring<br />
H1903 LE*<br />
STEERING WHEEL PULLER<br />
• For all major makes of automobiles: 5/8" x 4" centre screw has recessed floating swivel<br />
• Five sets of (2 each) side screws: 3/8" - 16 x 4", 5/16" - 18 x 4-1/2", 5/16" - 24 x 3-1/2",<br />
1/4" - 28 x 3", M8 x 1.25 x 80mm<br />
H1903<br />
44<br />
PULLERS<br />
www.jetequipment.com
Change language