SPECIALTY AUTOMOTIVE TOOLS

FUEL SYSTEM
H3363
H3363 L
4 PC A/C SPRING LOCK COUPLING SET
• For separating spring lock air conditioning lines
• Spring-loaded closed clamp deflects any spray when disconnecting pressurized lines
• Colour coded set of 4 sizes: 3/8", 1/2", 5/8", 3/4"
• 1981- current Ford and some 1994 - current Chrysler vehicles
H3364 L
GM HEATER LINE DISCONNECT TOOL
• Releases heater line quick connect fitting from engine block and thermostat housing
• 1991 – current GM 3.1L / 3.4L & 3800 engines
H3364
H3546
10 PC NOID LIGHT & IAC TESTER SET
• Noid lights provide the most efficient way to check electronic fuel injection (EFI) signals
• Quick & easy operation. Disconnect fuel injectors & plug the noid light into the injector wiring harness
• Crank engine, normal signals are indicated in rapid flashes of the noid light
• A constant light or no light confirms an EFI signal problem
• Comes in a convenient blow mould storage case
Checks Systems of the following:
• Bosh PFI, Bosh 2, Ford TBI, GM PFI, GM TBI, GM SCPI, GM Multec 2, Geo TBI
• IAC Straight signal tester – 1987 to current GM No.700 TBI & PFI systems with flat 4-pin connector
• IAC 90 degree signal tester – 1982 to current GM TBI & PFI systems with square 4-pin connector
H3546
OIL / OXYGEN / VACUUM
SENSOR SOCKETS
H3547 LE*
7 PC OIL, OXYGEN & VACUUM
SENSOR SOCKET SET
• Contains seven popular oil, oxygen and vacuum switch sensor sockets
• Works on most computerized engine controlled vehicles
• Chrome vanadium steel, heat treated for strength & durability
• Comes in a convenient blow mould storage case
Kit includes:
H3327, H3346, H3440, H3580, H3583, H3586, H3595 Sockets
H3547
40
FUEL SYSTEM
www.jetequipment.com