SPECIALTY AUTOMOTIVE TOOLS

EXHAUST
PIPE & MUFFLER IMPACT EXPANDERS
• Use with impact wrench
• Removes clamp grooves and rounds out exhaust pipes
• A practical, rugged tool that makes easy work of a tough job
• Expansion rings set in deep grooves to prevent wear
CAUTION: Not to be used to stretch pipe.
H1175 / H1017
H1175 SMALL – for Compacts & Foreign Cars
Range: 1-1/8" - 1-3/4" (29mm - 44mm) diameter
H1017 STANDARD – for Passenger Cars
Range: 1-1/2" - 2-7/16" (38mm - 62mm) diameter
H1176 EXTRA LARGE – for Passenger Cars & Trucks
Range: 2-1/8" - 3-7/16" (54mm - 87mm) diameter
H1176
H1018
TAILPIPE CUTTER
• Easily cuts thin and thick walled exhaust pipe from 3/4" to 3-1/4" (19-83mm) in diameter
• Thriteen 19mm cutting wheels eliminate “bottoming out”
• Ideal for heavier walled European-type exhaust pipes
• Does not leave burrs
• Only 1/4 turn needed to cut, works well in hard-to-reach places
• Keep chain well oiled for long life
H1018
H3438 L
G.M. EXHAUST MANIFOLD SPREADER
• Used to re-install small block Chevrolet manifolds
• Expands a warped manifold so that all bolt holes accurately align
• Prevents cross-threading of manifold bolts or install before removing manifold to prevent misalignment
• For best results, use in pairs
CAUTION: Not to be used to stretch pipe.
H3438
H3148 Y
EXHAUST PRESSURE TESTER
• Unique design allows pressure to be taken either through the oxygen sensor hole or through the exhaust
pipe with a threaded insert system (included)
• Accurately determines excessive exhaust back pressure caused by catalytic converter or muffler blockage
Kit includes:
H3148A Y Gauge 0 - 15 lbs
H3148B Hose Assembly
H3148C Insert Installing Tool
H3148D Oxygen Sensor Adaptor 18mm
H3148E Oxygen Sensor Adaptor 12mm
H3148F 10 Pack Inserts, Washers, Screws
H3148
Specialty Automotive Tools
EXHAUST
35