SPECIALTY AUTOMOTIVE TOOLS

HEAD & VALVE
H3456
H3456 Y
DELUXE OVERHEAD
VALVE SPRING COMPRESSOR
• Designed to service most cars with overhead valves and newer vehicles with confined areas
under the hood
• The knob is removeable exposing a 5/8" hex post allowing the technician to operate the tool
with a 5/8" wrench or socket
• The components are heat-treated for added strength and long service life
• Use air hold tool, H1119 or H3261 to keep valves in place while using the tool on the car
(See page 29)
• Not to be used with impact tools. Use on or off the car
H1078
H1078 L
VALVE SPRING COMPRESSOR
• Compress valve springs without removing heads. For use on GM 8 cylinder and most other
heads with stud type rocker arms
• Easy to use; remove rocker arm and fasten tool to stud
• Use with H1119 “Air Holds” or H3261 cylinder air hose to keep valves closed
H1396
H1396 Y
“SHORTY” VALVE LIFTER
• Engineered for faster work on L-head engines having straight stemmed valves
• Extremely strong
• Provides fast, easy lift with easy to turn screw
• Tested to 1000 lb. load
H1403 Y
VALVE SPRING COMPRESSOR
• For small engines
• The ideal tool for removing and replacing valve springs in small engines
• Slender design enables this tool to reach into the small engine recesses
• Thumb screw adjustment widens or narrows jaws to fit valve springs
H1403
H1125 Y
SMALL ENGINE SPRING COMPRESSOR
• This precision tool is designed for small air-cooled engines with
spring diameters of 9/16" - 1-1/16" Height: 5-1/8" Width: 3-3/8"
• One piece, heavy duty jaw compresses spring for easy replacement of split locks and pins
• Services virtually all small motors, motorcycles, garden tractors and similar engines
H1125
30
HEAD & VALVE
www.jetequipment.com