SPECIALTY AUTOMOTIVE TOOLS
SPECIALTY AUTOMOTIVE TOOLS
SPECIALTY AUTOMOTIVE TOOLS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SUSPENSION / DRIVE TRAIN<br />
H3536<br />
H3537<br />
H3536 LE*<br />
MASTER BALL JOINT ADAPTOR SET<br />
• This master set covers most press-fit vehicle joint components<br />
• Heavy duty master set is used to service the removal/installation of ball joints, universal joints,<br />
truck brake anchor pins and 4WD ball joints<br />
• C-frame alone can be used to remove/replace universal joints<br />
• Tool can remove rusted and corroded parts<br />
• An expanded version of our H3537 4-in-1 ball joint service set<br />
• Comes in convenient blow mould storage case<br />
Kit includes:<br />
• Heavy duty C-frame and forcing screw (1.106" x 7 threads per inch)<br />
• All components listed in our kit H3537 and all the receiver tubes and receiving/installation<br />
adaptors to work on press fit upper and lower ball joints on most Dodge Ram, Ford, GM, IHC and<br />
Jeep 2 and 4 wheel drive pick-up trucks, SUV’s and vans (auto’s with Dana 44 front axles)<br />
H3537 LE*<br />
4-IN-1 BALL JOINT SERVICE SET<br />
• For press-fit vehicle joint components<br />
• Heavy duty, four function set to service the removal/installation of ball joints, universal joints, truck<br />
brake anchor pins & 4WD ball joints<br />
• Both ball joint and 4WD ball joint service can done without taking the control arm off<br />
• U-joint service can be performed on needle type u-joint bearings<br />
• Truck anchor pin service can be performed with pins up to 1-1/4" diameter<br />
• Services 4WD ball joint equipped vehicles including those vehicles with Dana44 front axles such<br />
as 1967 to current 1/2 ton & 3/4 ton Dodge, GM, Ford, IHC, Jeep<br />
• Tool will even remove rusted and corroded parts<br />
• C-frame alone can be used to remove/replace universal joints<br />
• Comes in convenient blow mould storage case<br />
Kit includes:<br />
• Heavy Duty C-Frame and Forcing Screw (1.106" x 7 threads per inch)<br />
• Installation and Removal Adaptors<br />
• Installation Cup Adaptor<br />
• Receiving and Installation Cups<br />
• 3 Receiver Tubes: 2-3/4" x 2-1/4", 2-1/4" x 1-3/4", 1-3/4" x 1-3/4"<br />
H1037<br />
H1037 Y<br />
COIL SPRING CLAMPING KIT<br />
• Remove, install and compress coil springs that can be reached through the center of the coil<br />
Single turning action on center shaft.<br />
• This kit can be used on standard models and converts easily to compact models<br />
• Maximum spring diameter: 5-5/8"<br />
• Maximum coil thickness: 3/4"<br />
H1560<br />
H1560 Y<br />
MACPHERSON STRUT TOOL<br />
• Allows you to quickly compress the coil spring to replace shock absorbers, spring sets, repair bent<br />
strut or strut tube and repair damaged spindle<br />
• Designed to be used on virtually all modern domestic and imported vehicles that use MacPherson struts<br />
• Do not use on GM "A", "J", or "X" body cars or coil springs that exceed a 6" outside diameter<br />
H3315 Y<br />
DELUXE MACPHERSON STRUT TOOL<br />
• Similar design and function as H1560 but has built-in detent pins to help lock the coil in place<br />
eliminating the need for extra safety hooks. Set up is faster and easier. Improved design<br />
• Comes in convenient blow mould storage case<br />
H3315<br />
18<br />
SUSPENSION/ DRIVE TRAIN<br />
www.jetequipment.com
Change language