SPECIALTY AUTOMOTIVE TOOLS

BEARING & BUSHING
H3047 L
WHEEL BEARING PACKER
• For use with grease guns. Works on all wheel bearings having a minimum I.D. of 1/2" to
a maximum O.D. of 5". Height of 1/4" - 2"
• Place bearing between cones and tighten. Old grease is forced out as new grease is pumped
in under pressure
• Use hand or power equipment
H3047
H3455 Y
EASY SQUEEZE BEARING PACKER
• Repack bearings in less time with less mess!
• No air hose or grease gun needed
• Packs 50 - 65 cage-type roller and ball type bearings, up to 3-1/2" O.D. x 2" I.D.
with one filling
• Cup made from transparent impact-resistant Lexan material for easy grease level check
H3455
H3437 LE*
10 PC BEARING RACE & SEAL DRIVER SET
• Inserts bearing race and seals quickly, straight and without damaging both race and axle
housings on the first try
• Collars fit most standard wheel bearing sizes
• Comes in convenient blow mould storage case
Kit includes:
• 9 Disc Sizes: 1.565", 1.750", 1.965", 2.325", 2.470", 2.555", 2 830", 2.995", 3.180"
• 1 Heavy Duty Driver Handle
H3437
H3538 LE*
18 PC UNIVERSAL DRIVER SET
• Includes most popular size drivers for proper installation of seals, bearings, bushings
• Ensures even distribution of force to all areas and prevents cocking
• Comes in convenient blow mould storage case
Kit includes:
• 12 Drivers: 5/8", 3/4", 7/8", 1', 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2"
• 1 Handle
• 4 Cap Screws
• 1 Hex Key
H3538
H3543 LE*
23 PC BUSHING REMOVER & INSERT KIT
• Use to remove & replace bushings on passenger vehicles, buses, trucks, farm, road
and construction equipment
• Double-end disc sizes range from 3/8" x 7/16" - 1-1/4 x 1-3/8" diameter in 1/16"
• Comes in convenient blow mould storage case
Kit includes:
• Double-ended Discs
Range: 3/8" x 7/16" - 1-1/4" x 1-3/8" diameter, in 1/16" increments
• 3 Drivers
• Nuts
Specialty Automotive Tools
H3543
BEARING & BUSHING
13