2009 Pilot Remote Control Engine Starter - Bernardi Parts
2009 Pilot Remote Control Engine Starter - Bernardi Parts
2009 Pilot Remote Control Engine Starter - Bernardi Parts
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
34. Secure the 4-pin connector to the vehicle harness<br />
with one wire tie.<br />
36. Locate and remove the blue tape from the vehicle 2-<br />
pin connectors (white), and unplug the vehicle 2-pin<br />
connectors as shown.<br />
WIRE TIE<br />
FUSE BOX<br />
VEHICLE 2-PIN<br />
CONNECTORS<br />
(WHITE)<br />
VEHICLE<br />
HARNESS<br />
BLUE<br />
TAPE<br />
4-PIN CONNECTORS<br />
792502AY<br />
35. Align the green-taped part of the engine starter<br />
harness with the vehicle clip. Secure the engine<br />
starter harness to the vehicle harness with one wire<br />
tie.<br />
STEERING<br />
SHAFT<br />
7D0701BE<br />
37. Plug the engine starter harness 2-pin connectors to<br />
the vehicle 2-pin connectors as shown.<br />
WIRE TIE<br />
VEHICLE<br />
HARNESS<br />
ENGINE<br />
STARTER<br />
HARNESS<br />
FUSE<br />
BOX<br />
VEHICLE<br />
2-PIN<br />
CONNECTORS<br />
2-PIN<br />
CONNECTORS<br />
FUSE<br />
BOX<br />
VEHICLE<br />
CLIP<br />
GREEN<br />
TAPE<br />
792503BY<br />
ENGINE STARTER<br />
HARNESS<br />
STEERING<br />
SHAFT<br />
792706BY<br />
38. Route the engine starter harness 2-pin connectors<br />
behind the fuse box as shown.<br />
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.<br />
AII 39404-39646 (0805)<br />
9 of 21