2009 Pilot Remote Control Engine Starter - Bernardi Parts
2009 Pilot Remote Control Engine Starter - Bernardi Parts
2009 Pilot Remote Control Engine Starter - Bernardi Parts
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
29. Install the engine starter harness fuse block clip on<br />
the control unit bracket.<br />
31. Route the engine starter harness relay block to the<br />
right side of the vehicle.<br />
ENGINE<br />
STARTER<br />
HARNESS<br />
VEHICLE<br />
RELAY BLOCK<br />
CLIP<br />
FUSE BLOCK<br />
CONTROL<br />
UNIT<br />
BRACKET<br />
792402AY<br />
ENGINE<br />
STARTER<br />
HARNESS<br />
RELAY<br />
BLOCK<br />
792404AY<br />
30. Install the engine starter harness clip on the vehicle<br />
bracket.<br />
ENGINE<br />
STARTER<br />
HARNESS<br />
32. Install the engine starter harness relay block on the<br />
vehicle relay block.<br />
33. Remove the blue tape from the vehicle 4-pin<br />
connector . Plug the engine starter harness 4-pin<br />
connector to the vehicle 4-pin connector.<br />
STEERING<br />
WHEEL<br />
VEHICLE<br />
4-PIN<br />
CONNECTOR<br />
(WHITE)<br />
CLIP<br />
VEHICLE<br />
BRACKET<br />
792403AY<br />
ENGINE<br />
STARTER<br />
HARNESS<br />
BLUE TAPE<br />
(Remove.)<br />
4-PIN CONNECTOR<br />
792501AY<br />
8 of 21 AII 39404-39646 (0805)<br />
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.