10 FT X 10 FT GAZEBO

ITEM #0365040 

10 FT X 10 FT GAZEBO 

GF-12S039B 

15 

29 

ATTACH YOUR RECEIPT HERE 

Serial Number 

Purchase Date 

Question, problems, missing parts Before returning to your retailer, call our customer 

service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday. 

XXXXXX 

1 

Lowes.com/allenandroth

TABLE OF CONTENTS 

Package Contents ............................................................................................................................3 

Hardware Contents ..........................................................................................................................4 

Safety Information ............................................................................................................................5 

Preparation ......................................................................................................................................5 

Assembly Instructions ......................................................................................................................6 

Operating Instructions ....................................................................................................................14 

Care and Maintenance ...................................................................................................................14 

Warranty .........................................................................................................................................14 

Replacement Parts List ..................................................................................................................14 

2 


PACKAGE CONTENTS 

R 

S 

PART DESCRIPTION QUANTITY 

A Post Plate Cover 4 

B Base Plate Bracket 16 

C Base Side Panel 16 

D Post Top Plate 4 

E Base Upper Moulding 4 

F Post Bottom Plate 4 

G Supporting Post 4 

H Upper Moulding 4 

I Left Under Crossbar 2 

J Right Under Crossbar 2 

PART DESCRIPTION QUANTITY 

K Left Upper Crossbar 2 

L Right Upper Crossbar 2 

M Canopy Roof Pole 4 

N Roof Connector 1 

O “U” Shaped Plate 4 

P Roof Fixation 1 

Q Finial 1 

R Fabric Cover 1 

S Stake 16 

Lowes.com/allenandroth 

3

HARDWARE CONTENTS (shown actual size) 

M6 x 15 

Short Bolt 

Qty. 76 

M6 x 20 

Butterfly Screw 

Qty. 4 

M6 

Bolt Nut Hex Wrench 

Dia. 18 x T1.2 

Qty. 8 

Qty. 1 

Washer 

(Not actual size) 

Wrench 

Qty. 32 

Qty. 1 

(Not actual size) 

M6 x 95 

Medium Bolt 

Qty. 16 M6 x 110 

Long Bolt 

Qty. 8 

4 


SAFETY INFORMATION 

Please read and understand this entire manual before attempting to assemble, operate or install the 

product. 

Two to four people are needed for assembly. 

Load of the hook on the roof: 50 lbs. (max) 

CAUTION 

WARNING 

KEEP ALL FLAME AND HEAT SOURCES AWAY FROM TENT FABRIC. 

This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in 

continuous contact with any flame source. The application of any foreign substance to 

the tent fabric may render the flame-resistant properties ineffective. 

Do not leave outside during high winds, heavy rains or snow. Remove canopy. 

Fasten the base to the deck whether it is wood or concrete. 

PREPARATION 

Before beginning assembly, make sure all parts are present. Compare parts with package contents 

list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the 

product. 

Estimated Assembly Time: Approx. 4 hours 

Tools required for Assembly (not included): Ladder, 5 ft. (at least 5 ft. during assembly). 

5 


ASSEMBLY INSTRUCTIONS 

1. Fasten base plate brackets (B) to the 

post plate cover (A) with short bolts (AA) 

using hex wrench (FF). 

1 

B 

B 

B 

Hardware Used 

A 

AA 

A 

A 

AA 

Short Bolt 

x 16 

Hex Wrench 

x 1 

2. Place four base side panels (C) into the 

brackets. Screw and tighten the post top 

plate (D) to the base plate bracket (B) 

with short bolts (AA) using hex wrench (FF). 

2 

D 

C 

D 

C 

AA 

Hardware Used 

AA Short Bolt 

Hex Wrench 

x 16 

x 1 

C 


6


3. Insert supporting post (G) into the 

base upper moulding (E). Hitch assembly 

to the base tube and fasten post bottom 

plate (F) to supporting post (G) with short 

bolts (AA) using hex wrench (FF). 

Do not slide down the base tube 

until all screws are inserted. 

3 

G G G 

E 

AA 

Hardware Used 

F 

F 

AA 

FF 

Short Bolt 

Hex Wrench 

x 16 

x 1 

4. Insert left under crossbar (I) into the 

right under crossbar (J). Attach using, 

in order, long bolts (CC), washers (GG) 

on both sides of connection, and bolt nuts 

(EE). Use hex wrench (FF) and wrench 

(HH). 

4 

I 

EE 

J 

Hardware Used 

CC 

GG 

CC 

GG 

EE 

FF 

HH 

Long Bolt 

Washer 

Bolt Nut 

Hex Wrench 

Wrench 

x 4 

x 8 

x 4 

x 1 

x 1 

7 



5. Attach “U” shaped plate (O) to crossbars using 

bolts (AA). 

5 

Hardware Used 

Short Bolt 

Hex Wrench 

x 4 

x 1 

6. Insert left upper crossbar (K) into 

the right upper crossbar (L). 

Attach using, in order, long bolts (CC), 

washers (GG) on both sides of 

connection, and bolt nuts (EE). Use 

hex wrench (FF) and wrench (HH). 

6 

Hardware Used 

CC 

Long Bolt 

washer 

Bolt Nut 

Hex Wrench 

Wrench 

x 4 

x 8 

x 4 

x 1 

x 1 


8


7. Attach “U” shaped plate (O) to crossbars using 

bolts (AA). 

7 

Hardware Used 

Short Bolt 

Hex Wrench 

x 4 

x 1 

8. Connect and fasten four canopy roof poles (M) 

together with the roof fixation (P) using short 

bolts (AA) with hex wrench (FF). 

8 

Hardware Used 

Short Bolt 

Hex Wrench 

x 4 

x 1 

9 



9. Put upper moulding (H) on supporting posts 

from step 3 and place them in an upright 

position in four corners to create a square. 

9 

10. Place crossbars atop supporting posts 

and attach using medium bolts (BB), 

washers (GG) and hex wrench (FF). 

Ensure that all bolt holes on crossbars 

are facing the inside of structure. 

10 

Bolt 

Hardware Used 

Medium Bolt 

Washer 

Hex Wrench 

x 8 

x 8 

x 1 

10 



11. Insert upper crossbars straight downward 

into under crossbars. Fasten crossbars to 

posts using medium bolts (BB), washers 

(GG) and hex wrench (FF). Ensure that bolt 

holes on upper crossbars are facing inside 

the structure. 

11 

Hardware Used 

Medium Bolt 

Washer 

Hex Wrench 

x 8 

x 8 

x 1 

12. Fasten the top to the crossbars (I, J, K, L) 

using short bolts (AA). 

12 

Hardware Used 

Short Bolt 

x 16 

11 



13. Attach fabric cover (R) to the roof connector (N) 

by slowly turning them all the way through the 

roof fixation (P). Screw the finial (Q) to the roof 

connector (N). Slowly twist roof connector (N) 

until fastened. 

13 

R 

R 

14. Open fabric cover (R) and attach to crossbars 

using butterfly screws (DD). Attach middle points 

first, then lock corners by twisting 90 degrees. 

Once the unit is assembled, ensure the legs 

are perpendicular to the ground. Secure the 

gazebo to the ground by inserting lawn stakes (S) 

through the holes at the post bottom plate (F) and 

into the ground. 

14 

R 

R 

R 

S 

Hardware Used 

Butterfly Screw x 4 

12 


CANOPY REMOVAL INSTRUCTIONS 

Step 1 Step 2 

Remove the twisting locks of 

the 4 corners as shown below. 

Remove the butterfly screws 

(DD) of the 4 crossbars as 

shown below. 

R 

R 

Step 3 Step 4 

Unscrew the finial (Q) and 

remove it from roof connector 

(N). 

Remove the fabric cover (R) from roof 

connector (N) and re-secure finial (Q) 

and roof connector (N) to the gazebo 

structure. 

R 

CAUTION: Do not leave outside during high winds, heavy rains or snow. Remove canopy. 

13 


OPERATING INSTRUCTIONS 

Stake all sunshade panels at the bottom of the frames per assembly instructions. In geographic 

regions with snowfall, heavy rain or wind, remove the fabric cover, fabric curtain and mosquito 

net and store these items inside. 

CARE AND MAINTENANCE 

This gazebo frame is made of steel with a powder-coated finish for durability and elegance. 

Slight pinholes will be present in the steel tubing that are customary to original steel work. 

Wash with soap and water. 

Before storing, remove leaves and dirt, drain all water that may have accumulated in or around 

patio furniture frames. If not drained properly, water can cause freeze damage including bursting 

or cracking of metal tubing. 

CAUTION: Do not leave outside during high winds, heavy rains or snow. Remove canopy. 

WARRANTY 

This warranty is extended to the original purchaser and applies to defects in materials and 

workmanship of your outdoor furniture or accessory item(s), provided it is maintained with care and 

used only for personal, residential purposes. 

Frames and welds are warranted to be free from defects in material or workmanship for a period of 

one year. 

Fabric is warranted for a period of one year against defects in material or workmanship. 

This warranty is not transferable and does not cover products damaged by misuse, neglect, 

accident, alterations or use and maintenance other than that specified in this instruction. 

The manufacturer will not be held liable for any direct, indirect, incidental or consequential damages. 

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or 

limitation of incidental or consequential damages, so the above limitations may not apply to you. 

This warranty gives you specific legal rights, and you may also have other rights which vary from 

state to state. 

U.S.A. Customers: Replacement canopies are available for purchase at www.Lowes.com 

REPLACEMENT PARTS LIST 

For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., 

EST, Monday - Friday. 

PART DESCRIPTION PART# 

AA 

BB 

CC 

Short Bolt 

Medium Bolt 

Long Bolt 

S36 

S37 

S38 

AA 

DD EE FF HH GG 

DD 

Butterfly Screw 

S39 

EE 

Bolt Nut 

S40 

FF 

GG 

HH 

Hex Wrench 

Washer 

Wrench 

S48 

S49 

S50 

BB 

CC 

Printed in China 

allen + roth ® is a registered trademark 

of LF, LLC. All rights reserved. 

14

10 FT X 10 FT GAZEBO

Create successful ePaper yourself

Delete template?

Save as template?