FLOORING CATALOGUE - Parchem

PARCHEM CONSTRUCTION SUPPLIES 

FLOORING CATALOGUE 

THE LEADING CHOICE FOR THE FLOORING CONTRACTOR

Please recycle 

© Copyright 2013 Parchem Construction Supplies Pty Limited 

This publication is copyright. All rights are reserved. 

Reproduction in whole or in part is prohibited without written permission. 

Application details are provided as a suggestion only of intended use. 

This catalogue is produced as a guide to the product range. Some items may not be available at all outlets. 

Owing to a continual product improvement, designs & specifications may be subject to change without notice. 

2 I Parchem Construction Supplies Pty Ltd ABN 80 069 961 968

® 

INDEX 

Manufacturer and distributor of industry leading brands 

The complete range of products and solutions for the flooring contractor.... 

CONTENTS 

Concrete Floor Repair 4 

Curing Compounds 5 

Preparation 5 

Surface Scarifiers 6-9 

Cup Wheels 10 

Drilling Equipment 11 

Concrete Grinders 12-13 

Grinding Shoes 14 

Shot Blasters 15-16 

Dust Collectors 17 

Power Hammer Tools 18-20 

Liquid Hardeners 21 

Primers 21 

Integral Hardeners 21 

Exposed Aggregate Finish 21 

Cementitious & Resin Underlays 21-22 

Floor Toppings 22-23 

Coatings 23-24 

Decorative Floor Toppings 24-25 

Concrete Sealers 25-26 

Tools & Equipment 26-27 

stencil 

Flooring Contractors I 3

concrete floor repair 

Concrete Floor Repair 

Patchroc C 

• Floor / pavement patch repair, fast set mortar 

(25-200 mm depth). 

Uses 

For the emergency reinstatement of localised deep patches 

in concrete pavements, airport aprons, access ramps, 

roadways and many industrial situations such as gangways 

and warehouse floors. 

Part ID 

Supply (kg) 

402060 20 

Patchroc GP 

• Floor / pavement patch repair, fast set mortar 

(15-75 mm depth). 

Uses 

For the emergency reinstatement of localised patches 

in concrete pavements, airport aprons, access ramps, 

roadways and many industrial situations such as gangways 

and warehouse floors. 

Part ID 

Supply (kg) 

402070 20 

Paveroc 

• Floor / pavement large area, repair mortar 

(15-50 mm depth). 

Uses 

Paveroc is used for the reinstatement of large areas 

of concrete pavements and floors to avoid the total 

replacement of bays. 

Part ID 

Supply (kg) 

402080 20 

Nitofill LV 

• Low viscosity, dual cartridge, epoxy crack-injection 

system. 

Uses 

Nitofill LV is designed for injecting cracks in concrete and 

masonry where there is a need to consolidate a structure or 

exclude water and air from contact with the reinforcement. 

Part ID 

Description 

344215 NITOFILL LV 1.5L PACK 

344214 NITOFILL LV 15L BASE PACK 

344216 NITOFILL LV HARDENER 15L PACK 

Conbextra EP10 

• A highly fluid epoxy grout for dynamic/repetitive load 

applications gap width between 0.25-10mm. 

Uses 

Conbextra EP10 is a low viscocity epoxy grout for 

situations where heavy dynamic or mobile loads are 

encountered. 

Emer-Seal PU25 

• High performance, flexible, one-component, 

polyurethane joint sealant. 

Uses 

Emer-Seal PU25 is used for Sealing joints in concrete 

panels, fibrous cement products, external cladding panels, 

blockwork and brickwork. Also in sealing joints around 

aluminium and timber door and window frames and 

between metal. 

Part ID 

Description 

620525 EMER-SEAL PU 25 CONC.GREY 600ML (20/CTN) 

620530 EMER-SEAL PU 25 WHITE 600ML (20/CTN) 

620535 EMER-SEAL PU 25 SANDSTONE 600ML (20/CTN) 

620545 EMER-SEAL PU 25 BLACK 600ML (20/CTN) 

620550 EMER-SEAL PU 25 BRICK RED 600ML (20/CTN) 

620555 EMER-SEAL PU 25 BEIGE 600ML (20/CTN) 

620560 EMER-SEAL PU 25 DRIFTWOOD 600ML(20/CTN) 

Emer-Seal PU40 

• Tough, abrasion resistant, one-component, 

polyurethane joint sealant, trafficable. 

Uses 

For bonding or sealing joints between most construction 

materials, where a high bond strength is required. 

Part ID 

Description 

620600 EMER-SEAL PU 40 CONC.GREY 600ML (20/CTN) 

620601 EMER-SEAL PU 40 BLACK 600ML (20/CTN) 

620606 EMER-SEAL PU 40 CONCRETE GREY 200L 

Roadseal SL 

• Very low modulus, self-smoothing, one component silicone joint sealant. 

Uses 

Sealing sawn joints in: 

• Asphalt roads & pavements. 

• Slot sealing of cable installations in asphalt and concrete pavements. 

• Abutment joints between concrete and asphalt pavements. 

Part ID 

Description 

610407 EMER-SEAL ROADSEAL SL CHAR.GREY 600ML 

610403 EMER-SEAL ROADSEAL SL CHARCOAL GREY 20L 

610406 EMER-SEAL ROADSEAL SL CHARCOAL GREY 200L 

Caulking Guns 

Part ID 

Description 

770513 SEALANT GUN LONG BARREL (SAUSAGE) 

ARW055 

DW-DC547-KIT 

CAULKING GUN 380MM 

CAULKING GUN DEWALT CORDLESS (KIT) 

Part ID 

Supply 

223115 300ML PAK 

223120 1.5L PAK 


floor surface preparation 

Emer-seal backing rod 

• Economical, low density, open cell, polyurethane, 

sealant backing rod range. 

uses 

Time saving – its flexibility, elasticity and round shape 

allows quick, efficient placement into both even and 

uneven joints. It can be stretched, squeezed or bent to 

conform to irregular surfaces. One size of diameter foam 

can be used in a range of joint sizes. 

Optimal sealant curing – open cell construction allows air 

to reach both sides of the sealant, ensuring uniform curing. 

Part ID 

Description 

665200 EMER-SEAL BACKING ROD 16MM X 150M ROLL 

665201 EMER-SEAL BACKING ROD 22MMX100M ROLL 




Curing Compounds 

Concure A99 

• Water based acrylic curing compound - conforms to 

AS3799. 

Uses 

Concure A99 is recommended for applications to the surfaces 

of freshly laid concrete, including renders, structural and mass 

concrete indoors and outdoors and particularly in situations 

where other conventional means of wet curing are difficult to 

maintain. 

Part ID 

Supply (L) 

900909 20 

909900 205 

Expandafoam Backing rod 

• Medium density, closed cell polyethylene backing rod 

range. 

uses 

Expandafoam is a closed cell polyethylene foam rod 

supplied in circular section cords of varying diameters. 

Expandafoam is primarily used in expansion joints but is 

also suitable for use in any joint system requiring a readily 

compressible joint filler containing no migratory chemicals 

which could adversely affect joint sealants. 

Part ID 

Description 

665120 EXPANDAFOAM ROD 6MMX250M ROLL 







665127 EXPANDAFOAM ROD 40MMX2M STRIP 

665128 EXPANDAFOAM ROD 50MMX2M STRIP 

EMER-SEAL CONstruction 

SILICONE HM 

• Tough, pick and abrasion resistant, one-component 

silicone sealant / adhesive for civil and industrial 

applications. 

Uses 

For bonding or sealing joints between most construction 

materials, where a high bond strength is required. 

Part ID 

610375 

Description 

EMER-SEAL CON SILICONE HM CON.GREY 

600ML 

Concure X90 

• Water based resin curing compound - conforms to AS3799. 

Designed to degrade with UV exposure. 

Uses 

Concure X90 is suitable for curing all freshly laid concrete either 

smooth or textured, indoors or outdoors. 

Part ID 

Supply (L) 

900804 20 

900801 205 

Concure AV 

• Evaporative retarders for plastic concrete to reduce 

shrinkage cracks. 

Uses 

Concure AV is recommended for spray applications onto 

the fresh surface of plastic concrete to greatly reduce 

cracking caused by unfavourable weather conditions. 

Part ID 

Supply (L) 

444444 20 

444445 200 

Preparation 

Hydrochloric Acid 

Part ID 

Supply (L) 

AC4051 5 

AC4052 20 


surface scarifierS 

SURFACE SCARIFIERS 

Features 

• Versatility - Surface grinder/scarifier with a cutting width of 200 mm (8”), ideal for concrete or asphalt surfaces. A variety of multipurpose, interchangeable tools makes surface cleaning 

easy, virtually eliminating down time for changing tools. 

• Handling - The machine combines lightweight with compact size & high performance. 

• Economical - The machine gives unsurpassed value & return on your investment in time & equipment. 

• Adjustable - The fine pitch tool height adjustment makes the machine responsive to your needs & extends tool life. 

• Expandable - An optional edger cage can be fitted allowing you to work within 12 mm from any wall or protrusion. A dust control outlet is fitted to allow use with an optional dust extractor. 

SP-8H 

SP-8E 

* Petrol SPS units come with a factory installed Cyclopac air filtration system. 

MODEL PETROL ELECTRIC 

Model SP-8 SP-8 SP-8E 

Part No. BR-SP8R BR-SP8H BR-SP8H 

Path 200 mm (8”) 200 mm (8”) 200 mm (8”) 

Engine Robin 6.0 hp Honda 5.5 hp 240V 1.5kW, 8.7amp 

Weight 61 kg 61 kg 68 kg 

CUTTER CAGES 

SURFACE SCARIFIER ACCESSORIES 

‘A’ Type Cage 

‘B’ Type Cage 

Part Code 

BR-R139 

DESCRIPTION 

Assembly Milling of misangled footpath, scrabbling of concrete surfaces and milling concrete joints. 

Part Code 

DESCRIPTION 

BR-50078 

Flail Cage Assembly - “A” Type 

BR-50146 

Friction Cage Assembly - “B” Type 

BR-50017 

Cutter Shaft 

BR-50102 

Ring Spacer 

BR-50339 Hardened Washer 

BR-50127 

Tension Spring 

BR-50147 

Shackles 

BR-50021 

B-1 Cutter 

BR-50139 

B-2 Cutter 

BR-50140 

B-2 Cutter 

BR-50125 

A-1 Cutter 

BR-50142 

A-2 Cutter 

BR-50143 

A-3 Cutter 

BR-50120 

Tungsten Carbide Tipped Cutter 


SUrface scarifiers 

MULTI BLADE MACHINE 

FEATURES 

• Dust free if connected to a convenient Blastrac dust collector. 

• Possibility to remove 3mm of concrete at a time (depending on type of concrete), which saves a lot of time. 

• Because this machine does not hit the floor, it is a perfect way to remove hard top layers from soft floors. 

• Sawing pattern is very fine, because of the many blades on one drum. 

• New: drive system equipped with a pedal. Machine can drive on power without a working drum. 

• Reduced the use of expensive diamond tools. 

• Complete sealed drum housing for reducing substance. 

• By using more spacers and fewer blades the sawing pattern can be changed. 

• Combination machine, which is easy to change from sawing machine into scarifying machine. 

• Comfortable to use, easy to move, low vibrations. 

• Several optional tools for each different application. 

Drum of Diamond Blades - 

used by BMC-335EHY 

Part Code 

DESCRIPTION 

E06320 DIAMOND BLADE 250 GREEN 30 / 40 

E06079 

SPACER RING 2.5MM 

MODEL 

BMC-335EHY 

Working width 

Scarifying capacity 

Motor power 

Working speed 

Weight 

Dimensions L / W / H 

Drive system / speed 

Push / Pull machine 

Surface 

Ø 335mm 

Up to 80 m²/h on concrete 

12.1kW / 400V - 50Hz / 32A – Three phase 

13.9kW / 400V - 60Hz / 32A – Three phase 

3000 rpm 

405 kg 

1400 mm / 605 mm / 1075 mm 

Hydraulic / 1-15 m/min 

Push 

Concrete / Stone / Asphalt 


surface scarifierS 

BLASTRAC SCARIFIERS 

Features 

• Closed circuit which is almost dust free, when connected to an appropriate Blastrac dust collector. 

• Heavy weight for increased scarifying performances. 

• New braking system with handle. During scarifying, the machine slows down itself. Brake force is easily changed with handle on steer. 

• Extra heavy drum, for more down force. 

• Adjustable braking device, lateral drum loading. 

• Micrometric and memorized adjustment of the working depth; No underground deterioration and more precision. 

• User friendly design, comfortable to use with low vibrations, easy to manoeuvre. 

• Several optional cutting tools for each different application. 

MODEL BMP-265B BMP-265E 

Working width Ø 265 mm Ø 265 mm 

Scarifying capacity Up to 120m²/h on concrete Up to 120 m²/h on concrete 

Motor power 8,2 kW / Petrol 5,5 kW / 400 V - 50 Hz / 16A – Three phase 

Working speed 1500 rpm 1500 rpm 

Weight 175 kg 175 kg 

Dimensions L / W / H 1260 mm / 500 mm / 1160 mm 1260 mm / 500 mm / 1160 mm 

Drive system / speed Manual / N/A Manual / N/A 

Push / Pull machine Push Push 

Surface Concrete / Stone / Asphalt Concrete / Stone / Asphalt 

scarifying cutters 

to suit bmp-265 

• Full tungsten carbide milling cutter. 

• Specially designed for removing coatings, 

epoxies, glue residues, egaline, road 

markings and thermoplastics. 

• Hard metal milling cutter with tungsten 

carbide plates. 

• Specially designed for removing coatings, 

epoxies, glue residues, egaline, road 


• Hard metal cutter with tungsten carbide tips. 

• Specially designed for removing concrete, 

asphalt, stone or other hard materials. 

Article Code MPL60-1 MPL75 MPL272 

Description Milling cutter 12pt. - Ø22xØ55x20 Milling cutter 6pt. - Ø19xØ55x20 Cutter 8pt. - Ø20xØ56x6 / 8,3 TC 


SUrface scarifiers 

BLASTRAC SCARIFIERS 

Features 


• Heavy weight for increased scarifying performances. 

• New drive system equipped with a pedal. Machine can drive on power without a working drum. 

• When motor is on, machine is moving forward automatically, no need to push it. 

• Adjustable braking device, lateral drum loading. 

• Micrometric and memorized adjustment of the working depth: no underground deterioration. 

• Variable speed, forward & backward motion. 

• User friendly design, comfortable to use with low vibrations, easy to manoeuvre. 

• Several optional cutting tools for each different application. 

MODEL BMP-335EHY BMP-335GHY 

Working width Ø 335mm Ø 335mm 

Scarifying capacity Up to 175 m²/h on concrete Up to 175 m²/h on concrete 

Motor power 12,1kW / 400V - 50Hz / 32A – Three phase 7,5kW diesel 

Working speed 1000 rpm 1000 rpm 


Dimensions L / W / H 1400 mm / 605 mm / 1075 mm 1400 mm / 605 mm / 1075 mm 

Drive system / speed Hydraulic / 1-15 m/min Hydraulic / 1-15 m/min 


Surface Concrete / Stone / Asphalt Concrete / Stone / Asphalt 

scarifying cutters 

to suit bmp-335 

• Hard metal cutter with 

tungsten carbide tips. 

• Specially designed for 

removing concrete, asphalt, 

stone or other hard materials. 

• Hard metal milling cutter with 

tungsten carbide ends. 


removing coatings, epoxies, 

glue residues, egaline, road 


• Full tungsten carbide milling 

cutter. 


removing coatings, epoxies, 

glue residues, egaline, road 


• Hard metal cutter with tungsten 

carbide tips. 

• Due to the 12 cutting points the 

threaded surface is more equal. 

• Specially designed for removing 

concrete, asphalt, stone or 

other hard materials. 

Article Code MPL24 MPL29 MPL60-1 MPL120 

Description Cutter 8pt. - Ø30xØ80x8 / 8.3 TC Milling cutter 6pt. - Ø30xØ80x20 Milling cutter 12pt. - Ø22xØ55x20 Cutter 12pt. - Ø30xØ77x8 / 8.3 TC 


cup wheelS 

SINGLE ROW 

• Single row diamond cup wheel suitable for grinding a wide range of construction materials 

at an economical cost. Materials include concrete, bricks, concrete pavers stone, concrete 

blocks etc. Should be used dry on electric power tools. 

Part Code Specification ARBOR Description 

SGP-1-100T 100×8×7×8×30 22.2 CUP100SRE- TRADE 



SPIRAL SEG 

• Spiral diamond cup wheels available with 9, 12 and 24 segments for aggressive grinding 

to more controlled type application where extended life is desired. Should be used dry 

on power tools or wet/dry if used on a walk behind floor grinder. Suitable for grinding 

concrete, bricks, concrete pavers, stone, concrete blocks etc. 


TSGP100-9 100×9×7×5×23 22.2/16 CUP SPIRAL-100S9 

TSGP125-9 125×9×7×8×23 22.2 CUP SPIRAL-125S9 



TURBO 

• Turbo diamond cup wheel with a coarse grit diamond designed for rapid removal of a wide 

range of construction materials with exceptional life. Materials include concrete, bricks, 

concrete pavers, stone, concrete blocks etc. Should be used dry on electric power tools. 


GJB100-GCA2-C 100×6×20 22.2/16 CUP TURBO 100C 

GJB100-GCA2-M 100×6×20 22.2/16 CUP TURBO 100M 

5 - SEGMENT 

• 5 - segment diamond cup wheel at an economical cost designed for aggressive grinding 

of wide range of construction materials such as concrete, bricks, concrete pavers, stone, 

concrete blocks etc. Also suitable for some epoxy removal. Should be used dry on power 

tools or wet/dry if used on a walk behind floor grinder. 


TSGP180-S5 178×5×7×8×28 22.2 CUP SP-SUPA 180S5 

GJB100-GCA2-F 100×6×20 22.2/16 CUP TURBO 100F 

TURBO 

• Turbo diamond cup wheel with a medium grit diamond designed for removal of a wide 

range of construction materials without deep scratching and giving exceptional life. 

Materials include concrete, bricks, concrete pavers, stone, concrete blocks etc. Should be 

used dry on electric power tools. 

R-SHAPE SEGMENT 

• New design “R” segment designed for rapid removal of concrete and hard painted 

coatings which have been applied to concrete Should be used dry on power tools or wet/ 

dry if used on a walk behind floor grinder. 


TSGR125 125×9×7×15×36 22.2 CUP125RC R-SEGMENT 

TSGR180 178×14×7×20×34 22.2 CUP180RC R-SEGMENT 


GJB125-GCA2-C 125×6×20 22.2 CUP TURBO 125C 

GJB125-GCA2-M 125×6×20 22.2 CUP TURBO 125M 

GJB125-GCA2-F 125×6×20 22.2 CUP TURBO 125F 

TURBO 

• Turbo diamond cup wheel with a fine grit diamond designed for fine grinding or removing 

scratches and finishing off on a wide range of construction materials and giving 

exceptional life. Materials include concrete, bricks, concrete pavers, stone, concrete 

blocks etc. Should be used dry on electric power tools. 

PCD 

• Poly Crystalline diamond cup wheels specifically designed for removal of glues and 

epoxies which are excessively built up on concrete surfaces. Softer type “chewy” materials 

are no match for this aggressive cup wheel. Should be used dry on power tools or wet/dry 

if used on a walk behind floor grinder. 


DRCW125-PCD 125×12×3×1.5×3 22.2 CUP PCD 125MM (12 TIP) 





GJB180-GCA2-C 180×6×20 22.2 CUP TURBO 180C 

GJB180-GCA2-M 180×6×20 22.2 CUP TURBO 180M 

GJB180-GCA2-F 180×6×20 22.2 CUP TURBO 180F 


Drilling equipment 

SHROUDS FOR ANGLE GRINDERS 

05-65903 

6mm wide tuck point 

• Premium quality 6.5mm wide blade used for tuck pointing and cleaning of mortar joints. 

Most commonly used by the professional in dry application. 

Part Code Specification Description 

HFTK105P-6 105×10×6.35×30×8×4.0 (85) BLADETEC-TU105/65 PREMIUM 




E06227 


E06227 POLYURETHANE UNIVERSAL 5" FULL SHROUD 

05-65903 POLYURETHANE UNIVERSAL 

7" CONVERTIBLE ECO 

SHROUD 

FIXING NUTS - CUP WHEELS 

9.5mm wide tuck point 

• Premium quality 9.5mm wide blade used for tuck pointing and cleaning of mortar joints. 

Most commonly used by the professional in dry application. 







FX-05-91587 ARBOR NUT ARBOR NUT (9” GRINDER) 

FX-05-91588 ARBOR NUT ARBOR NUT (5” GRINDER) 

FX-05-91595 M14 THREAD BLADE NUT 

V-Segment Crack Chaser Wheels 

• Premium quality crack chasing blade with a “V” type segment designed to follow and 

widen cracks in concrete prior to repair. Most commonly used by the professional in dry 

application. 

Part ID Specification Description 

HFSTK105P 100x12x9.5x30x7x5.5 (76) BLADETEC CRACK CHASER 105MM 




grinders 

FLEXTOOL CUB GRINDER 

BLASTRAC BG-250G13 

MODEL 

FLEXTOOL CUB GRINDER 

MODEL 

BG-250G13 

Working width 

Ø250 mm 

Working width 

Ø250 mm 

Motor 

2.2 kW / 230V 

Motor 

7.6 kW (10.2hp) Petrol Honda 

Working speed 

1450 rpm 

Working speed 

2000 rpm 

Weight 

46 kg 

Weight 

142 kg / 50 kg disc pressure 


1301 mm / 458 mm / 1106 mm 


Manual / N/A 


Push 

Surface 

Concrete / Stone / Asphalt 


CUB-EZPLATE-250 

CUB EZ CHANGE PLATE 

QFSHOE-HC16 80×2×10×10×40 QUICK FIT SHOE 16GR WHITE 

QFSHOE-MC16 80×2×10×10×40 QUICK FIT SHOE 16GR GREY 



QFSHOE-ABE20 80×2×10×10×40 QUICK FIT SHOE 20GR BLACK EXTREME 

QFSHOE-HC40 80×2×10×10×40 QUICK FIT SHOE 30/40GR WHITE 

QFSHOE-MC40 80×2×10×10×40 QUICK FIT SHOE 30/40GR GREY 

QFSHOE-AB40 80×2×10×10×40 QUICK FIT SHOE 30/40GR BLACK 

QFSHOE-ABE40 80×2×10×10×40 QUICK FIT SHOE 30/40GR BLACK EXTREME 

QFSHOE-MC50 80×2×10×10×40 QUICK FIT SHOE 50/60GR GREY 



QFSHOE-SHC100 80×2×10×10×40 QUICK FIT SHOE 100GR WHITE EXTREME 



QFSHOE-ABE100 80×2×10×10×40 QUICK FIT SHOE 100GR BLACK 



QFCUB-PCD 

QUICK FIT SHOE PCD -GLUE & RESIN 


CRM-1005THC 250×5×10×10×40 GRINDING PLATE 10" WHITE 30/40GR (5-SEG) 

CRM-1005TMC 250×5×10×10×40 GRINDING PLATE 10" GREY 30/40GR (5-SEG) 

CRM-1005TABE 250×5×10×10×40 GRINDING PLATE 10" BLACK 30/40GR (5-SEG) 

CRM-1005TG20 250×5×10×10×40 GRINDING PLATE 10" WHITE 20GR (5-SEG) 



CRM-1010TAB 250×10×10×10×40 GRINDING PLATE 10" BLACK 30/40GR (10-SEG) 

CRM-1010G20 250×10×10×10×40 GRINDING PLATE 10" WHITE 20GR (10-SEG) 


CRM-1020SHC 250×20×10×10×40 GRINDING PLATE 10" WHITE(S) 30/40GR (20-SEG) 


CRM-1020TAB 250×20×10×10×40 GRINDING PLATE 10" BLACK 30/40GR (20-SEG) 

CRM-1020TFF 250×20×10×10×40 GRINDING PLATE 10" WHITE 30/40GR (20-SEG) 


grinders 

Blastrac grinders 

Features 


• 3 planetary rotating discs Ø 155 mm or Ø 185 mm or Ø 240 mm. 

• Separate drive system for central rotation and 3-disc planetary distribution. 

• User friendly and comfortable to use with low vibration. 

• No risk of underground deterioration. 

• Can work even in places with high hygiene and safety standards (food, pharmaceutical, medical industries). 

• Perfect for decorative floor applications. 

• Convenient for dry and wet applications, indoor, outdoor. 

• Floating shroud with brush for every application. 

• Many optional tools, which are easy to change because of the patented DIAMAG system. 

BMG-435WD 

BMG-735PRO 

BMG-580PRO 

BMG-780PRO 

MODEL BMG-435WD BMG-580PRO 

MODEL BMG-735PRO BMG-780PRO 

Motor 

2,2 kW / 230V - 50Hz / 16A - 

Single phase 

3.0 kW / 400V - 50Hz / 16A - 

Three phase 

2,2 kW / 110V – 50Hz / 32A – 

Single phase 

7,5 kW / 400V - 50Hz / 16A – 

Three phase 

Working speed 750 rpm 350 – 1100 rpm 



1100 mm / 460 mm / 1350 

mm 

1990 mm / 595 mm / 1140 

mm 



Application 

Concrete / Stone / Marble / 

Asphalt 


Asphalt 

Working width Ø700 mm Ø750 mm 

Motor 

11 kW / 400V - 50Hz / 22,5A – 

Three phase 

15 kW / 400V - 50Hz / 29,5A – 

Three phase 

Working speed 350 – 1100 rpm 400 – 1200 rpm 

Weight 335 kg 436kg 


1980 mm / 735 mm / 1180 

mm 

2110 mm / 780 mm / 1250 

mm 



Application 


Asphalt 


Asphalt 


grindING SHOES 

UNIVERSAL SHOE TO SUIT BMG-435 & ALL DIAMAG 

ADAPTER PLATES 

• Screw type 2-segment diamond shoes to suit the Blastrac BMG-435 Planetary Grinder 

available in three bonds to cover all types of concrete grinding applications. Whether it 

be very hard concrete or the other end of the scale with soft abrasive concrete, shoes 

are available from 16 grit through to 300 grit. Poly Crystalline Diamond (PCD) shoes also 

available for removal of glues and expoxies which are excessively built up on concrete 

surfaces. Softer type “chewy” materials are no match for these PCD shoes. Available bond 

types: Soft, Medium, Hard. Can be used wet or dry. 

easy lock grinding shoes - 1 segment 


RLSHOE-HC16/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE HC16 



RLSHOE-MC16/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE MC16 



RLSHOE-AB16/1S EP-HEX 13X8/16X33-1SEG EASY LOCK 1-SEG GRINDING SHOE AB16 



2 Segment Grinding 

Shoes 

1 Segment Grinding 

Shoes 

PCD Grinding Shoe 

easy lock grinding shoes - 2 segments 

1 segment 


BLSHOE-HC20-1S 80×1×12×12×40 BMG GRINDING SHOE WHITE 1-SEG 16GRIT 

BLSHOE-HC40-1S 80×1×12×12×40 BMG GRINDING SHOE WHITE 1-SEG 40GRIT 

2 segment 


BLSHOE-HC16 80×2×10×10×40 BMG GRINDING SHOE 16GR WHITE 

BLSHOE-MC16 80×2×10×10×40 BMG GRINDING SHOE 16GR GREY 



BLSHOE-ABE20 80×2×10×10×40 BMG GRINDING SHOE 20GR BLACK EXTREME 

BLSHOE-HC40 80×2×10×10×40 BMG GRINDING SHOE 30/40GR WHITE 

BLSHOE-MC40 80×2×10×10×40 BMG GRINDING SHOE 30/40GR GREY 

BLSHOE-AB40 80×2×10×10×40 BMG GRINDING SHOE 30/40GR BLACK 

BLSHOE-ABE40 80×2×10×10×40 BMG GRINDING SHOE 30/40GR BLACK EXTREME 

BLSHOE-MC50 80×2×10×10×40 BMG GRINDING SHOE 50/60GR GREY 



BLSHOE-SHC100 80×2×10×10×40 BMG GRINDING SHOE 100GR WHITE EXTREME 



BLSHOE-ABE100 80×2×10×10×40 BMG GRINDING SHOE 100GR BLACK 



BLSHOE-PCD 80×2×10×10×40 BMG GRINDING SHOE PCD 


RLSHOE-VHC16 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE VHC16 



RLSHOE-HC16 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE HC16 




RLSHOE-MC16 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE MC16 



RLSHOE-MC120 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOEM120 

RLSHOE-AB16 EP-HEX 13X8/16X33-2SEG EASY LOCK 2-SEG GRINDING SHOE AB16 




diamag adapter plates 

Description 

Model E07155 E07185 E07230/6 E07240 E07270 

DIAMAG ADAPTER PLATE SUIT 

BMG-435 

DIAMAG 185 ADAPTER PLATE SUIT 

BMG -580 

DIAMAG ADAPTER PL SUIT 

HTC500/650S/E&HDX 

DIAMAG 240 ADAPTER PLATE SUIT 

BMG-735/780 

DIAMAG ADAPTER PL SUIT 

HTC800/800HDX 


SHOT BLASTERS 

polishing resins 


BG7110050 DIAMAG MAGNETIC DIAMG RESIN WET BOND 50GRIT 







BLASTRAC 1-8DPS30 

Features 

• Closed circuit which is dust free, when connected to an appropriate Blastrac dust 

collector. 

• Universal unit: can be connected to a standard electrical plug (230 V). 

• First model of the range with an electric drive system. 

• Ergonomic design and user friendly control panel. 

• Heavy duty professional equipment available either in 230 V (easy to plug in on every job 

site) or 400V. 

• Reliable machine, suitable for rental. 

• The smallest operator walk-behind shot blaster. 

• Easy to transport, handle and use. 

• Can be used for floor preparation / renovation / maintenance and decorative purposes. 

BG7100100 DIAMAG MAGNETIC DIAMAG DRY RESIN PAD- GRIT 100 






BLASTRAC 1-5HH 

Features 

• Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector. 

• Universal unit: can be connected to a standard electrical plug (230V). 

• Small and compact, but still very efficient. 

• Can work on very small or hardly accessible areas for example edges. 


• Reliable machine, suitable for rental. 

• Can be used for floor and wall preparation / renovation / maintenance and decorative 

purposes. 

BLASTRAC 1-10DS/GLOBAL 

Features 

• Closed circuit which is dust free, when connected to an appropriate Blastrac dust collector. 

• Highly versatile machine, appropriate for many job site sizes. 

• High quality and strong fabrication. 

• Reliable machine provided with latest technology. 




MODEL 

1-5HH 

MODEL 1-8DPS30 1-10DS/GLOBAL 

Working width 

Blasting capacity 

Motor: 

Working speed 

Weight 




Abrasive consumption 

Surface 

125mm 

Up to 12m²/h on concrete 

1,4kW / 230V - 50Hz / 16A - Single phase 

1,4kW / 110V - 5oHz / 16A - Single phase 

0,2 – 1,3 m/min 

9.5 kg 

480mm / 195mm / 350mm 

Manual / N/A 

Push 

N/A 

Steel / Concrete / Stone / Asphalt 

Working width 203 mm 254 mm 

Blasting capacity up to 50 m²/h on concrete up to 200 m²/h on concrete 

Motor 

3,0 kW / 230V - 50Hz or 60Hz 

/ 16A - Single phase 

3,0 kW / 400V - 50Hz or 60Hz 

/ 16A - Three phase – 5 pole 

11 kW / 400V - 50Hz or 60Hz 




1310 mm / 400 mm / 1200 

mm 

1880 mm / 400 mm / 1060 

mm 

Drive system / speed Electric / 0 – 23 m/min Electric / 0.5 – 25 m/min 

Push / Pull machine Push Pull 

Abrasive consumption 10 – 75 gr/m² 10 – 75 gr/m² 

Surface 

Steel / Concrete / Stone / 

Asphalt 


Asphalt 


SHOT BLASTERS 

BLASTRAC 1-15DS/GLOBAL 

Features 


collector. 

• Highly versatile machine, appropriate for medium to big job site sizes. 

• High quality and strong fabrication. 

• Height adjusting system for easy transport. 


• Reliable machine due to proven concept. 

• Easy handle and use. 


DUST COLLECTORS 

MODEL 

BDC-1216 

BLASTRAC 2-20DT 

Features 


collector. 

• Highly versatile machine, appropriate for medium to big job site sizes. 

• Very good performing and separation system. 

• Powerful machine equipped with 2 twin motors 11 kW. 


• Height adjusting system for easy transport. 

• Very efficient on all types of floors. 

• High performances and still fit to a standard door entrance. 

• Increased productivity, reduced maintenance costs. 

• Easy handle and use. 


Dimensions W / L / H 

Weight 

Motor power 

Dust extraction motors 

Filter 

Cleaning 

Dustbin capacity 

Dust hose inlet 

Suitable machines 

ACCESSORIES 

CF721001 

CF722001 

CF722029 

CF722122 

CF722147 

640 x 570 x 1.000 mm 

40 kg 

1,6kW / 230 V / 50Hz & 60Hz / 16A 

2 independent motors 

M-class star filter 

Manual shaker on top 

40 litres 

Ø 51 mm 

Handheld / small grinders, shot blasters and scarifiers. 

DESCRIPTION 

Hose fitting 70mm. 

Reducer 70 - 50 mm 

Mobile nozzle 400 mm D50 

Chromed handgrip D=50mm 

Mobile nozzle 500mm D50 

MODEL 1-15DS/GLOBAL 2-20DT 

MODEL 

BDC-454 

Working width 380 mm 550 mm 

Blasting capacity up to 250 m²/h on concrete up to 450 m²/h on concrete 

Motor 

15 kW / 400V - 50Hz or 60Hz 


2 x 11 kW / 400V - 50Hz or 

60Hz / 63A - Three phase – 5 

pole 



1880 mm / 570 mm / 1200 

mm 

1950 mm / 720 mm / 1400 

mm 

Drive system / speed Electric / 0.5 – 25 m/min Electric / 0.5 – 33 m/min 

Push / Pull machine Pull Pull 

Abrasive consumption 10 – 75 gr/m² 10 – 80 gr/m² 

Surface 


Asphalt 


Asphalt 

Dimensions W / L / H 

Weight 

Motor power 

Optional motor power 

Dust extraction motors 

Filter 

Airflow 

Cleaning 


Bag capacity 

Optional Big Bag system 

Optional dustbin 

665 x 1344 x 1428 mm 

267 kg 

5,5kW / 400 V / 50Hz / 32A 

5,5kW / 440 V / 60Hz / 32A 

1 powerful motor 

4 high quality cartridge filters 

15000 l/min 

Automatic pulse cleaning system 

Ø 76mm / Ø 102mm / Ø 127mm 

25kg 

67,5kg 

100 liters 


DUST COLLECTORS 

MODEL BDC-1330LPP BDC-3140LPP 

MODEL BDC-654 BDC-655 

Dimensions W / L / H 600 x 980 x 1.780 mm 600 x 1.200 x 1.600 mm 


Motor power 4,5kW / 230 V / 50Hz / 16A 4kW / 400 V / 50Hz / 16A 

Optional motor power 4,5kW / 230 V / 60Hz / 16A 4kW / 440 V / 60Hz / 16A 

Dust extraction motors 3 independent motors 1 powerful motor 

Airflow 7500 l/min 3 cartridge filters 

Filter 3 cartridge filters 7500 l/min 

Cleaning 

Automatic pulse cleaning 

system 


system 

Dust hose inlet Ø 51 mm / Ø 76 mm Ø 51mm / Ø 76mm 

Bag capacity 25 kg 25kg 

Optional dustbin 100 litres 100 liters 

Dimensions W / L / H 1.410 / 1.560 mm 800 x 1.730 x 1.350 mm 

Weight 365kg 650kg 

Motor power 

Optional motor power 

4,0kW / 400 V / 50Hz / 32A 

& 63A 

4,0kW / 440 V / 60Hz / 32A 

& 63A 

5,5kW / 400 V / 50Hz / 32A 

& 63A 

5,5kW / 440 V / 60Hz / 32A 

& 63A 

Dust extraction motors 1 powerful motor 1 powerful motor 

Filter 6 high quality cartridge filters 6 high quality cartridge filters 

Airflow 15333 l/min 20833 l/min 

Cleaning 



system 

Ø 51mm / Ø 127mm / Ø 

152mm 


system 

Ø 127mm or Ø 152mm 

Dustbin Capacity 87,5 litres 100 liters 

filters for blastrac DUST COLLECTORs 

DUST COLLECTOR accessories 

MODEL 

description 

Hose fitting 

817767 STAR FILTER FOR BDC-1216 

817787 STAR FILTER FOR BDC-1324 

490803-1 CARTIRDGE FILTER FOR BDC-654/317P/1330LPP/3140P/3140LPP 

E10218 

CARTIRDGE FILTER FOR BDC-454/655 

Reducer 

Nozzle 

Handgrip 

ACCESSORIES 

DESCRIPTION 

CF721001 

CF722001 

CF722122 

CF722029 

CF722147 

Hose fitting 70mm. 

Reducer 70 - 50 mm 

Chromed handgrip D=50mm 

Mobile nozzle 400 mm D50 

Mobile nozzle 500mm D50 


power hammer tools 

cordless rotary hammer drill 

HT-DH36DAL 

36V Rotary Hammer 

HT-DH18DL(HL) 

18V Rotary Hammer 

Model Tool Code Battery Type Speed No Load (rpm) Impact Rate (bpm) Weight (kg) 

HD18DL(HL) SDS Plus Cassette 0-750 0-3,100 2.3 

DH36DAL SDS Plus Slide 0-550 0-2,250 4.0 

rotary hammer drill 

HT-DH40MR 

40 mm Hammer Drill SDS max 

HT-DH40MRY 

40 mm Rotary Hammer Drill 

HT-DH50MRY 

50 mm Rotary Hammer Drill 

Model Tool Code Watts Input Blow Energy (joules) Speed No Load (rpm) Impact Rate (bpm) Weight (kg) 

DH40MR SDS Max 950 10 240-480 1,320-2,650 6.5 

DH40MRY SDS Max 950 10.5 240-480 1,320-2,650 6.8 

DH50MRY SDS Max 1,400 20 120-260 1,050-2,150 10.5 

demolition hammer 

HT-H45MRY(H1) 

Demolition Non-Rotary Hammer 

HT-65SB2 


HT-H90SB 


Model Tool Code Watts Input Blow Energy (joules) Impact Rate (bpm) Weight (kg) 

H45MRY (H1) SDS Max 950 12.7 3,000 5.9 

H65SB2 30mm Hex 1,400 42.0 1,400 16.5 

H90SB 28mm Hex 1,650 55.0 850 32.0 

additional power tools 

HT-DV18DL(HL) 

18V Cordless Drill 

HT-G13SR3-BP 

730W 5” Grinder 

HT-G18DL(H4) 

18V Cordless Grinder 


power hammer tools 

Suitable for: Hitachi, Kango, Makita, Ryobi - 

21mm Hex 

To Suit Medium Pneumatic - 22mm Hex 

Part No. Description Length mm Pack Qty 


SP-MP4X18 Moil Point 540 5 

K09962 Moil Point 450 5 

33 

SP-NC4X18 Flat Chisel 540 5 

25 

K09907 Flat Chisel 450 5 

To Suit Medium Pneumatic - 28mm Hex 

50 

K09913 

Wide Scaling 

Chisel 

300 5 

110 

K09923 

Clay Spade 

500 

5 


SP-MP2X18 Moil Point 610 5 

17.2 

K09606 

FCT Shank 

To suit floor 

cleaing tool. 

400 5 

33 

SP-NC2X18 Flat Chisel 610 5 

125 

SP-AC2W Asphalt Cutter 500 5 

110 

SP-CS2 Clay Spade 500 

Type of Working End Part No. Description Length mm Pack Qty 

Floor Scraper 

K08979 Complete with 2.0mm thick blade. 280 5 

Blade 

K08986 2.0mm Blade for Floor Scraper 170 5 

Repair Kit to Floor Scraper 

K061040K 

18pcs Repair Part for Floor Scraper. Contents: 2 - Rubber, 

4 - Screw, 4 - Nut 8 - Spring Washer. 

5 


power hammer toolS 

suitable for sds-max shank suitable for: Hitachi, Kango, Makita, Ryobi - 

30mm 



BS1-618-600-011 Moil Point 400 5 

HT944961 Moil Point 450 5 

25 

BS1-618-600-202 Flat Chisel 400 5 

30 

HT944962 Flat Chisel 450 5 

75 

BS9913 

Wide Scaling 

Chisel 

300 5 

75 

HT944964 

Wide Scaling 

Chisel 

410 5 

110 

HT944967S Clay Spade 500 5 

110 

BS1-618-601- 

017S 

Clay Spade 

500 5 

135 

HT944968 Asphalt Cutter 500 5 

125 

17.2 

3º 

BS9923A 

BS9606 

Asphalt Cutter 

FCT Shank 

To suit floor 

cleaning tool. 

500 5 

400 5 

17.2 

3º 

HT9606 

FCT Shank 

To suit floor 

cleaning tool 

400 5 

suitable for sds - plus shank 


BS1-618-600-009 Moil Point 250 5 

BS1-618-600-010 Flat Chisel 250 5 

BS1-618-601-002 40mm Wide Chisel 250 5 


harDENERS / PRIMERS & UNDERLAYS 

Liquid Hardeners 

Durafloor HD 

• Liquid floor hardener / densifier / dustproofer - clear. 

Uses 

On any new or existing internal concrete or masonry surface. 

Part ID 

Supply (L) 

505002 5 

505001 20 

Integral Hardeners 

Nitoflor Sicaltop 

• Floor hardener, silicon carbide / alumina additive - dry shake on. 

Uses 

Nitoflor Sicaltop provides a non-rusting, extremely hard wearing, 

abrasion and slip resistant surface to new concrete floors. 

Part ID 

Supply (kg) 

402040 20 

505005 200 

Durafloor HD-S 

• Liquid floor hardener / densifier / stain resistant / sheen 

sealer - clear. 

Uses 

On any new or existing internal concrete or masonry surface. 

Nitoflor Sicaltop Spreader 

Part ID 

Description 

BM-TV-830 SICALTOP COLOUR SPREADER 

Part ID 

Supply (L) 

505004 5 

505003 20 

Primers 

Durafloor Level Prime 

• High performance primer for Cemtop XD, Cemtop GP 

Advanced, Durafloor Leveltop, Durafloor Leveltop Rapid and 

Durafloor Levelbase. 

Uses 

Concentrated high performance primer for cementitious 

underlays. 

Part ID 

Supply (L) 

480005 1 

Exposed Aggregate Finish 

Preco RWB 

• Surface revealing liquid for exposed aggregate finish on fresh concrete. 

Uses 

Preco RWB is used to reveal aggregate in freshly placed 

horizontal concrete by delaying the surface set so that the 

mortar paste may be brushed and washed from between 

the aggregate particles, after the mass of the concrete has 

set. 

Part ID 

Supply (L) 

156080 20 

156085 200 

480016 5 

480017 20 

Nitoprime Zincrich 

• Zinc-rich epoxy resin primer to protect steel reinforcement 

within repair mortar. 

Uses 

Nitoprime Zincrich is the recommended anti-corrosion primer 

for exposed steel reinforcement for use with Renderoc concrete 

repair mortars. 

Part ID 

Supply (L) 

322100 1 

Primer No.13 

• Used on porous surfaces with Emer-Seal 200, Emer-Seal 

PU40 and Emer-Seal CR. 

Cementitious & Resin Underlays 

Cemtop GP Advanced 

• High performance floor underlay, self smoothing, levelling 

mortar for carpet / tiles (2-50 mm thickness) with enhanced 

flow properties for fast and easy application. 

Uses 

Cemtop GP Advanced is designed as a heavy duty underlay 

which forms a smooth, hard surface for a variety of floor 

finishes including carpet and ceramic tiles. 

Part ID 

Supply (kg) 

430088 18 

Part ID 

Supply (ml) 

665221 250 

Primer No.21 

• Used on porous surfaces with Emer-Seal PU25 & Emer-Seal 

PU40 if required. 

Part ID 

Supply (ml) 

Durafloor Leveltop 

• Floor underlay, self smoothing, levelling mortar for vinyl / 

carpet / timber (0 - 50 mm thickness). 

Uses 

Durafloor Leveltop is designed as an internal high performance, 

easily installed underlay which forms a very smooth, hard 

surface for a variety of floor finishes including carpet, ceramic 

tiles, rubber, sheet vinyl and timber flooring. 

665228 250 

Part ID 

Supply (kg) 

430092 15 


UNDERLAYS & TOPPINGS 

Durafloor Leveltop Rapid 

• Floor underlay, trowellable, rapid hardening, levelling 

mortar for carpet / tiles / vinyl (0-50 mm thickness). 

Uses 

Durafloor Leveltop Rapid is designed as a heavy duty floor 

repair compound which provides a very smooth surface 

allowing the smooth installation of carpet, ceramic tiles 

sheet rubber, sheet vinyl and vinyl tiles. 

Part ID 

Supply (kg) 

430105 20 

Durafloor Levelbase 

• Floor underlay, economical sub-base build mortar 

(up to 200 mm thickness). 

Uses 

Durafloor Levelbase is designed as a heavy duty sub-base 

underlay which forms a smooth, hard surface to be used under 

Durafloor Leveltop and Fosroc Cemtop GP Advanced & XD 

where deep sections are required. 

Cemtop XD 

• Cementitious floor topping internal trafficable wear 

surface (6-12 mm thickness). 

Part ID 

Description 

402055 Cemtop XD 15kg 

Aegis MSP 

• Cementitious floor topping internal / external trafficable 

waterproofing surface (2-4 mm thickness). 

Uses 

Aegis MSP is used to provide a strong and durable 

cementitious coating that can be applied to a wide variety of 

substrates, including concrete, concrete blocks, polystyrene 

blocks, aerated concrete blocks (AAC), asphalt and fibre 

cement. 

Part ID 

Description 

752003 Aegis MSP Coarse Grey 20kg 

752001 Aegis MSP Fine Grey 20kg 

Part ID 

Supply (kg) 

750007 Aegis Surface Primer #1 20L 

430095 20 

Nitomortar 903 

• Solvent free, general purpose, epoxy binder system. 

Uses 

Nitomortar 903 can be combined with selected fillers 

and aggregates to produce epoxy mortars of various 

consistencies. Also used as a priming system with some 

Durafloor epoxy flooring products. 

Durafloor SL 

• Floor topping, industrial, self smoothing epoxy resin 

system (2-4 mm thickness). 

Uses 

Durafloor SL provides a dense, impervious, coloured and 

chemically resistant floor surface which is hygienic and 

easy to clean. 

Part ID 

Description 

481019 Nitomortar 903 Base Resin 20L 

481040 Nitomortar 903 Base Resin 200L 

481018 Nitomortar 903 Hardener 10L 



Part ID 

Description 

405400 Durafloor SL Base Resin 16L Pack 

405800 Durafloor SL Base Resin 200L 

405700 Durafloor SL Hardener 16L Pack 

405805 Durafloor SL Hardener 200L 

404045 Durafloor SL Fillers 10kg 


Floor Toppings 

Durafloor V Anti-Skid 

• Heavy duty, flow applied, lightweight anti-skid surface 

dressing. 

Part ID 

Durafloor TF 

• Floor topping, trowel applied, high build epoxy resin 

system (5 mm thickness). 

Part ID 

Description 

400400 Durafloor V Anti-Skid Base 16L Pack 

400405 Durafloor V Anti-Skid Hardener 16L Pack 

400410 Durafloor V Anti-Skid Fillers 16L Pack 

405760 Durafloor Heavy Duty Aggregate 25kg 

Description 

405345 Durafloor TF Base Resin15L 

405350 Durafloor TF Hardener 5L 

405355 Durafloor TF Fillers 20kg 

Durafloor SLX 

• Floor topping, industrial, self smoothing epoxy 

resin system for cold weather application (2-4 mm 

thickness). 

Part ID 

Description 

405900 Durafloor SLX Base Resin 16L Pack 

402000 Durafloor SLX Base Resin 200L 

405910 Durafloor SLX Hardener 16L Pack 

402005 Durafloor SLX Hardener 200L 



Durafloor N (Novolac) 

• HIghly chemically resistant Novolac epoxy clear binder 

produces various coating and topping application 

systems. 

Uses 

Durafloor N is an all purpose, highly chemically resistant 

Novolac epoxy coating/topping system suitable for a 

number of surfaces including concrete, steel and masonry. 

Part ID 

Description 

401040 Durafloor N (Novolac) Base 15L 

401045 Durafloor N (Novolac) Hardener 10L 


TOPPINGS & COATINGS 

Durafloor X 

• Durafloor X produces a topping and coating system 

with a textured finish, which provides a hard-wearing, 

chemically resistant floor that can handle extreme 

temperatures. The system also has anti-microbial 

properties which reduce the growth of bacteria and 

mould. 

Uses 

Durafloor X has been designed to produce a flooring 

system for applications that require high resistance to 

mechanical stress and chemical attack, that are subject 

to extreme temperatures and need to be applied within a 

limited timeframe. Typical uses for the system are in wet 

processing zones in chemical processing plants and food 

preparation and manufacturing areas. 

Part ID 

description 

405854 DURAFLOOR X COAT PART A - 4.83KG KIT 

405855 DURAFLOOR X COAT PART B - 4.83KG KIT 

405856 DURAFLOOR X COAT PART C - 4.83KG KIT 

405848 DURAFLOOR X PRIMER BASE 10KG KIT 

405849 DURAFLOOR X PRIMER HARDENER 10KG KIT 

405850 DURAFLOOR XT BASE 

405851 DURAFLOOR XT HARDENER 

405852 DURAFLOOR XT FILLER 2 

405853 DURAFLOOR XT FILLER 1 

Coatings 

Durafloor HP 

• Floor coating, high performance epoxy, solvent free, 

non-tainting. 

Uses 

Durafloor HP is a heavy duty, industrial/commercial coating 

for concrete floors and walls that is attractive and easily 

cleaned. Highly resistant to chemical attack and the action 

of forklift vehicular and commercial type traffic. 

Part ID 

Description 

414501 Durafloor HP Base Resin 8L Pack 

414210 Durafloor HP Special Colour Base Resin 8L Pack 

414414 Durafloor HP Special Colour Base Resin 16L Pack 

414502 Durafloor HP Hardener 8L Pack 

Durafloor FC 

• Floor/wall coating, solvent free epoxy, fast cure. 

Uses 

A heavy duty, 100% solids, non-skid surface coating 

for concrete and steel floors that is attractive and easily 


of vehicular and foot traffic. 

Part ID 

Description 

414504 Durafloor FC 4L Pack 

Durafloor TC PLUS 

• Trafficable Coating System. 

Uses 

To provide a hard wearing surface, reduce noise and 

improve the appearance of multi-storey car park floors 

and other trafficable areas in both new construction and 

refurbishment projects. Available as an external waterproof 

system for exposed car park decks and a wearing coat 

system for intermediate car park levels, basements and 

other internal trafficable areas. 

Part ID 

Nitoflor FC100 

Description 

405750 PRIMER BASE 10KG KIT 

405751 PRIMER HARD 10KG KIT 

405752 MEMBRANE BASE KIT 15KG 

405753 MEMBRANE HARD KIT 15KG 

405754 BODY COAT BASE 20KG KIT 

405755 BODY COAT HARD 20KG KIT 

405756 T/COAT MED GRY BASE 10 

405757 T/COAT ALL COLOUR HARD 

405758 T/COAT SP COLOUR BASE 

Please contact your nearest branch regarding aggregate 

options for Durafloor TC Plus. 

• Floor sealer, general purpose solvent based, UV stable, 

acrylic coating. 

Uses 

Nitoflor can be used as a sealer for concrete floors to 

provide a dustproof and more easily cleaned surface with 

resistance to penetration of oils and other liquids. Ideal for 

warehouses, car parks, light industrial buildings, etc. 

414415 Durafloor HP Hardener 16L Pack 

414505 Durafloor HP 4L Pack 

Part ID 

Description 

414507 Durafloor HP Special Colour 4L 

Durafloor HS 

• Floor coating, economical, high build epoxy, 90% solids 

Uses 

Durafloor HS is a heavy duty, commercial abrasion resistant 

treatment for concrete floors that is attractive and easily 


of commercial type traffic. 

Suitable for use in wet areas where strict levels of hygiene 

and cleanliness are required or where chemicals are 

manufactured, spilled or are an integral part of the process. 

Part ID 

Description 

414600 Durafloor HS Base 8L Pack 

414649 Durafloor HS Hardener 8L Pack 

410002 Nitoflor FC100 Clear 20L 

410001 Nitoflor FC100 Clear 200L 

411022 Nitoflor FC100 Special Colour 20L 

561574 Nitoflor FC100 T&G Grey 20L 

561572 Nitoflor FC100 T&G Grey 200L 

Nitoflor FC120 HB 

• Coloured floor coating, chlorinated rubber, UV stable, 

for trafficable floors and carparks. 

Uses 

Nitoflor FC120 is suitable for use in heavy traffic areas 

such as light industrial traffic, stairs, fuel station forecourts, 

driveways and parking stations. 

Part ID 

Description 

411050 Nitroflor FC120 HB Black 20L 

411070 Nitroflor FC120 HB Silver Grey 20L 


COATINGS / dECORATIVE FLOOR TOPPINGS 

Nitoflor FC130 

• Floor/wall coating, economical, water based epoxy, 

chemical resistant. 

Uses 

Nitoflor FC130 is used to provide a dust-proof, easily 

cleaned surface which is resistant to most oils and liquids. 

It is suitable for use on walls and floors in warehouses, 

garages, light industrial and food processing areas, kitchens 

and other areas of pedestrian and light vehicular traffic. 

Part ID 

Description 

412184 Nitoflor FC130 Base For Colour Packs 3L 

412182 Nitoflor FC130 Clear Base 2.9L 

412181 Nitoflor FC130 Clear Hardener 13.1L 

412196 Nitoflor FC130 Mid Grey Hardener 13L 

412183 Nitoflor FC130 Silver Grey Hardener 13L 

412215 Nitoflor FC130 Silver Trophy Hardener 13L 

412210 Nitoflor FC130 Special Colour Hardener 13L 

412180 Nitoflor FC130 Silver Grey 4L Pack 

Toppings & Coatings 

Colour Packs 

Durafloor Colour Paks 

• Available in Durafloor SL, TF, HS, HP, FC & N 

See Durafloor Colour Chart for colours. 

Part ID 

description 

440001 DURAFLOOR COL PAK BANKSIA 0.5KG 

440010 DURAFLOOR COL PAK CREAM 0.5KG 

440013 DURAFLOOR COL PAK FERN GREEN 0.5KG 

440003 DURAFLOOR COLOUR PAK BLACK 0.5KG 

440018 DURAFLOOR COLOUR PAK HARBOUR BLUE 0.5KG 

440042 DURAFLOOR COLOUR PAK KOALA GREY 0.5KG 

440075 DURAFLOOR COLOUR PAK LIGHT GREY BLUE 0.5KG 

444000 DURAFLOOR COLOUR PAK OFF WHITE 0.5KG 

440026 DURAFLOOR COLOUR PAK PASTEL GREY 0.5KG 

440029 DURAFLOOR COLOUR PAK RASPBERRY 0.5KG 

440070 DURAFLOOR COLOUR PAK SAFETY YELLOW 0.5KG 

440031 DURAFLOOR COLOUR PAK SAND 0.5KG 

Durafloor PU 

• Single pack, high build, clear high gloss, high abrasion 

resistant polyurethane coating. 

Uses 

Durafloor PU is a high build coating, formulated for both 

interior and exterior applications to provide a clear, high 

gloss, high abrasion resistant finish. 

Part ID 

Supply (L) 

400650 5 

400655 20 

Durafloor SR 

• Modified synthetic rubber based flooring coating. 

440017 DURAFLOOR COLOUR PAK SILVER GREY 0.5KG 

440059 DURAFLOOR COLOUR PAK WOOLWORTHS RED 0.5KG 

440061 DURAFLOOR COLOUR PAK WOOLWORTHS GREY 0.5KG 

Decorative Floor Toppings 

Lustreseal M20 

• Premium Polyurethane, High Solids Sealer. 

Uses 

The toughest sealer in the Lustreseal range - very high gloss 

and extremely hard. Suitable over Mastershield polymer 

flooring, Covacrete and other concrete (incl. Stamp/Stencil) and 

masonry surfaces in thoroughly dry conditions. Also ideal over 

polished concrete. M20 is a moisture curing single pack 

polyurethane. 

Uses 

Specifically formulated to provide quick drying, hard 

wearing, trafficable surfaces for floors including workshops, 

storerooms, undercover parking areas et 

Part ID 

UA20A 

UA20B 

description 

UA20 Urethane Acrylic - 8.7Lt Part A 

UA20 Urethane Acrylic - 1.25Lt Part B 

Part ID 

Supply (L) 

561310 4 

561311 20 

Mastershield M50 

• Economical Epoxy Flooring or Surface Primer. 

Uses 

A two pack Aqueous Epoxy that can be used as a primer or as a 

base for epoxy flooring. May be tinted (aqueous tints), flaked or 

sprayed in contrasting flecks. Provides a low gloss, satin finish. 

Highly economical epoxy flooring. FOR INSIDE USE - Special 

application for outside use. 

Part ID 

MS50A 

MS50NTA 

MS50B 

description 

Mastershield - M50 - 5L - Part A - Opaque Base NSI 

Mastershield - M50 - 5L - Part A - Neutral Base NSI NLA 

Mastershield - M50 - 5L - Part B - For Opaque and Neutral 

Bases NSI 


DECOrative floor TOPPINGS & concrete sealers 

Mastershield M90 

• Premium Epoxy Commercial Flooring Product. 

Uses 

Premium Polymer flooring product. May be tinted, flaked and 

other decorative inclusions. Clear product that may be used to 

suspend objects, graphics or lighting for a novelty feature floor. 

Chemical resistant - ideal for commercial and industrial floors. 

FOR INSIDE USE - Special application for outside use. 

Part ID 

MS90A 

MS90B 

MS90C 

MS905KIT 

MS90MVA 

description 

Mastershield - M90 - 6L - Part A 

Mastershield - M90 - 4L - Part B 

Mastershield - M90 - 2L - Part C - Fast Cure Hardener NLA 

Mastershield UA20 

• High Solids, Gloss Urethane Sealer 

Mastershield - M90 - 5L Kit 

Mastershield - M90 - MV Part A 

Uses 

Used as a high gloss finish and advanced protection over 

Mastershield polymer flooring, Covacrete, Stampcrete, 

Stencilcrete and other concrete and masonry surfaces. Also 

ideal over polished concrete. Exceptional performance for 

economy. 

Part ID 

UA20A 

UA20B 

description 

UA20 Urethane Acrylic - 8.7Lt Part A 

UA20 Urethane Acrylic - 1.25Lt Part B 

aqueous tints 

Colour liquid dispersion of organic and inorganic pigments 

USES 

For colouring Mastershield M50, Covacrete Base Powder. 

Part ID 

MTBIS 

MTBON 

MTCLA 

MTMUS 

MTOUT 

MTSIL 

MTTAN 

MTBRWHT 

MTBRBL 

MTBRTY 

MTBRTR 

MTBRTG 

MTBRTB 

Mastershield FLAKE 

Decorative flooring polymer flake. 

description 

Mastershield - Aqueous Tint - Biscuit 

Mastershield - Aqueous Tint - Bone 

Mastershield - Aqueous Tint - Clay 

Mastershield - Aqueous Tint - Musk 

Mastershield - Aqueous Tint - Outback 

Mastershield - Aqueous Tint - Silver Grey 

Mastershield - Aqueous Tint - Tan 

Mastershield - Aqueous Tint - White 

Mastershield - Aqueous Tint - Black 

Mastershield - Aqueous Tint - Bright Yellow 

Mastershield - Aqueous Tint - Bright Red 

Mastershield - Aqueous Tint - Bright Green 

Mastershield - Aqueous Tint - Bright Blue 

Uses 

Mastershield Polymer Flake is used in decorative Polymer 

Flooring. 

Part ID 

PFFLA 

description 

Mastershield Flake - Flake Various NSI 

lustreseal colour tint 

Colour liquid dispersion of organic and inorganic pigments. 

USES 

Lustreseal Colour Tint is added to Lustreseal Acrylic Sealer 

to give various shades of colour to stamped, stencilled or 

plain concrete. Can also be used to tint Mastershield M90. 

Part ID 

LSAPR 

LSBAR 

LSBEI 

LSBLA 

LSBLU 

LSBRI 

LSBRO 

LSBUR 

LSCHA 

LSCIN 

LSCOF 

LSCRE 

LSGRY 

LSGUM 

LSLIG 

LSMAR 

LSNUT 

LSROS 

LSSAH 

LSSAN 

LSTER 

LSVIN 

LSWHI 

description 

LUSTRESEAL TINT APRICOT 1LTR 

LUSTRESEAL TINT BARLEY 1LTR 

LUSTRESEAL TINT BEIGE 1LTR 

LUSTRESEAL TINT BLACK 1LTR 

LUSTRESEAL TINT BLUESTONE 1LTR 

LUSTRESEAL TINT BRICK RED 1LTR 

LUSTRESEAL TINT BRONZE 1LTR 

LUSTRESEAL TINT BURGUNDY 1LTR 

LUSTRESEAL TINT CHARCOAL 1LTR 

LUSTRESEAL TINT CINNAMON 1LTR 

LUSTRESEAL TINT COFFEE BROWN 1LTR 

LUSTRESEAL TINT CREAM 1LTR 

LUSTRESEAL TINT GREY 1LTR 

LUSTRESEAL TINT BLUE GUM 1LTR 

LUSTRESEAL TINT LIGHT TERRACOTTA 1LTR 

LUSTRESEAL TINT MARIGOLD 1LTR 

LUSTRESEAL TINT NUTMEG 1LTR 

LUSTRESEAL TINT BLUSHING ROSE 1LTR 

LUSTRESEAL TINT SAHARA SAND 1LTR 

LUSTRESEAL TINT SAND 1LTR 

LUSTRESEAL TINT TERRACOTTA 1LTR 

LUSTRESEAL TINT VINTAGE BUFF 1LTR 

LUSTRESEAL TINT WHITE 1LTR 

external Concrete Sealers 

Acrylic Sealer 

Standard sealer used for stencil & stamped surfaces. 

Good all-round concrete sealer. 

• Durable 

• Easy to apply & maintain 

• Semi gloss finish 

• High clarity 

• Tintable 

Uses 

Used as a high quality, gloss protective finish over decorative 

and other concrete and masonry surfaces. For best results, 

first prime with Lustreseal Superbond. 

Part ID 

Supply (L) 

ACR5 5 

ACR20 20 

ACR200 200 

Extended Wear Plus 

Hard wearing, high gloss sealer. 

• High durability 

• Excellent fuel, oil, mould & fungi resistance 

• Semi gloss - high clarity 

• Excellent marking resistance 

Uses 

Used for extended longevity in place of Acrylic Sealer for most 

concrete and masonry surfaces. Provides superior protection from 

the ingression of dirt, mould, fungi, fuel and oil. High quality wet-look 

finish. For best results, first prime with Lustreseal Superbond. 

Part ID 

Supply (L) 

EXT20 20 

EXT200 200 


concrete sealers / tools & equipmENT 

MATT finish SEALER 

When a natural look is more appealing than a gloss. 

• Natural low lustre 

• Good marking resistance 

• Hard wearing 

• Stylish alternative 

• Tintable 

Uses 

Used as a natural low sheen finish coat for most decorative concrete 

or masonry surfaces. Popular as an alternative finish for internal 

floors and also as a natural look finish for resurfaced concrete, 

stamped impression concrete and stencil concrete. Low lustre 

masks minor marking and scuffing. For best results, first prime with 

Lustreseal Superbond. (Not to be used as a first coat primer). 

Part ID 

Supply (L) 

ACRM20 20 

Flooring Tools & Equipment 

Hopper Gun 

Part ID 

Description 

MH-MP001 HOPPER GUN FOR TEXTURE SPRAYING 

HG2006 

MARSHALLTOWN HOPPER GUN 

HG2007 

HOPPER GUN SPEAR & JACKSON 

13L Pressure Sprayer 

Part ID 

Description 

MH-SP35C 13LT PRESSURE SPRAYER (CONC SEALER) 

Chapin Premium Sprayer 

Solvent 

Part ID 

SA6007 

Description 

CHAPIN PREMIER SPRAYER 

Part ID 

Supply (L) 

SOL4 4 

SOL10 10 

SOL20 20 

Superbond 

Same day prime sealer. 

• Excellent moisture tolerance 

• Priming sealer 

• High penetration & adhesion 

• Flexible 

• Ideal for use as resealing primer 

• Great for sealing exposed aggregate 

Uses 

Use as same day sealer/primer for concrete and primer for masonry 

and natural stone surfaces (for porous stone - test before use). Also 

suitable for resealng - provides essential flexibility between finish 

coats (See Reseal Guide). Must be over-coated with a finish sealer 

upon surface curing (with the exception of exposed aggregate). 

Part ID 

Supply (L) 

SUP20 20 

SUP200 200 

internal Concrete 

Sealers 

Waterbased Acrylic Sealer 

The Green Choice for the environmentally smart consumer. 

Low odour and ideal for confined spaces or indoor applications. 

• Low odour - very low VOC 

• Good marking resistance 

• Medium gloss 

• Self-crosslinking polymer 

• Water clean up 

• Tintable 

MIXERS/STIRRERS/PADDLES 

MH-MDR56 

MH-MDR57 

MH-MDR58 

Part ID 

Description 

MH-MDR56 

MIXER - 85 X 500MM WITH 8MM HEX SHAFT 

MH-MDR57 

MIXER - 130 X 600MM WITH 10MM HEX SHAFT 

MH-MDR58 

MIXER - 120 X 600MM WITH M14 THREADED TOP 

MH-MDR59 

MIXER - 140 X 600MM WITH M14 THREADED TOP 

Survey Paint 

Part ID 

Description 

MH-ZINCGAL 

400G - GALVANISING SPRAY 

AMS-350BLK 

Spray & Mark 350Ml Black 

AMS-350B 

Survey Marking Paint Blue 

AMS-350FB Survey Marking Paint Fluro Blue 

AMS-350FG Survey Marking Paint Fluro Green 

AMS-350FO Survey Marking Paint Fluro Orange 

AMS-350FP Survey Marking Paint Fluro Pink 

AMS-350FY Survey Marking Paint Fluro Yellow 

AMS-350W 

Survey Marking Paint White 

AMS-350Y 

Survey Marking Paint Yellow 

THREADED TOP 

Part ID 

WBS20 

Supply (L) 

20L 

Brooms 

Part ID 

Length (mm) 

FB-1572 600mm BROOM HEAD C/W FIXED BRACKET 




TOOls & Equipment 

ELECTRIC MIXER 

• 1600W, 240V/50Hz for extra torque 

• 2 speed gear box 

• Variable speed control 

• M14 female thread 

• Lightweight 

• Soft grip handles 

• Professional German quality 

• Ideal for mixing render and plaster compound 

• With FREE mixing paddle 

Mixing Buckets 

Part ID 

Supply (L) 

770161 20 

Squeegees 

Part ID 

Description 

MH-64450 

SQUEEGEE ALUM FRAME - 450MM 

MH-64600 


MH-64900 


Part ID 

MH-EV160 

Cam Rakes 

Part ID 

Description 

FL-MWR-57081 CAM 1 - FOR CAM GAUGE RAKE 







FL-MWR-57020 

CAM GUAGE RAKE 1200MM 

FL-MWR-57000 


FL-MWR-57010 


FL-MWR-68611 REPLACEMENT WIRE SET OF 3 

FL-MWR-68616 REPLACEMENT WIRE SET OF 4 

FL-MWR-57081-88 SET OF CAM SIZES: 1-8 

FL-MWR-58609 

WIRE GUAGE RAKE 600MM 

FL-MWR58734 

WIRE GUAGE RAKE 900MM 

Square Trowels 

Description 

1600W ELECTRIC MIXER 

Rollers 

Part ID 

Description 

SA6004 460mm ADJUSTABLE FRAMEAND EXTENTION POLE 

SA6039 ALUMINIUM EXTENTIONPOLE 1.2M TO 2.4M 

FT0027 

EXTENSION HANDLE (TEXP)1.2 METER 

MH-LW 

LAMBSWOOL COVER - 230MM 

MH-PK1 

PAINT KIT-TRAY,ROLLER & COVER 

SA6036 PRO SERIES COVER 230MM SHORT NAP 6MM 

MH-RC938 ROLLER COVER - 10MM NAP - 230MM 

SA6003 ROLLER COVER 230M LAMBSWOOL COVERS 

SA6002 ROLLER COVER 270X 20mm PROD CODE 3313 

SA6001 

ROLLER COVER 460mm FINE TEXTURE 

SA6006 

ROLLER FRAME - 230mm 

SA6005 

ROLLER FRAME - 270mm 

SA6037 

SPIKED ROLLER 9 + FRAME 

SA6032 

YOKE FRAME 460MM (SC ROLLER) 

Walking Trowel 

Part ID 

Description 

FW-555 WALKING TROWEL 600MM ROUND ENDS 

FW-557 WALKING TROWEL 600MM ROUND ENDS S/S 

Part ID Blade Dimension (mm) Blade Gauge 

FP1002 280 x 120 Light 

S* = Stainless Steel 

Pointed Trowels 

Part ID Blade Dimension (mm) Blade Gauge 

FP1001 120 x 365 Light 

FP1009 100 x 355 Light 

FP1091 115 x 405 Light 

FP1092 115 x 450 Light 

FP1093 115 x 500 Light 

S* = Stainless Steel ProSoft Handle 

Blower 

Part ID 

HT-RB24E 

Hippo Mixer 

Description 

Blower 

FP1002 

Floor Scraper 

Part ID 

Description 

MH-FS150 150 mm Wide Blade 

MH-FS150SB 150 mm Spare Blade 






MH-FS355SB 355 mm Space Blades 

Brushes 

Part ID 

Length 

ARW046 

30 x 19 x 5cm 

Part ID 

Description 

770302 HIPPO MIXER 


ventilating faNS 

AMERIC VENTILATING FANS 

The Americ VAF-3000 Series of industrial ventilators are ideal for use in confined spaces that require a powerhouse air ventilator. They rise above the rest blowing away their competion and 

can handle the most demanding industrial ventilation requirements. The Americ ventilators can deliver both positive and negative airflow of up to 59 m3/min and can provide all the continuous 

circulating airflow needed to get your job done. The VAF-3000P (pneumatic) also meets strict hazardous space standards, delivering high performance with uncompromising safety. 

Features 

• Impact and weather resistant high density polyethylene plastic construction. 

• Dual wall design protects the interior fan chamber from external damage. 

• Fans can be stacked vertically, maximising available working space. 

• Virtually maintenance free - reliability, portability & durability. 

VAF-3000 

VAF-3000P 

Model 

VAF3000 

Model 

VAF3000P 

Product Code 

VAF-3000 

Type 

Electric 

Size mm (in) 305 (12) 

Dimensions (l x w x h) mm 432 x 355 x 533 

Operating Weight Kg 14.75 

Fan Speed RPM 2850 

Power Output HP (Kw)) 1 (.75) 

Voltage volts 240 

Current amp 4.2 

Frequency Hz 50 

Product Code 

VAF-3000P 

Type 

Pneumatic 

Size mm (in) 305 (12) 

Dimensions (l x w x h) mm 432 x 355 x 533 

Operating Weight Kg 12.7 

Fan Speed RPM 3000 

Power Output HP (Kw)) 1.5 (1.1) 

Air Consumption cfm 38 

Inlet Pressure (max) psi 100 

Noise Level dBa 86

wET / Dry vacuum 

FAN Accessories 

Accessories 

Ducting 

Duct Carrier 

AIP-DUCT 

L/Duty Ducting 305mm x 6m 

VAF-AM-D1225 H/Duty Quick Connect Ducting 305mm x 7.5m 

VAF-AM-CA12 

Aluminium Ducting Coupler 305mm 

VAF-DSR25-12P Lightweight Polyethylene Duct Carrier (max 7.5m) 

VAF-CDA-3000 

Carpet Drying Attachment 

Duct Coupler 

Carpet Drying Attachment 

Air Flow Rates VAF-3000 VAF-3000P 

CFM M3/Min. CFM M3/Min. 

Free Air 2091 59.2 2063 58.4 

4.5m Straight 1756 49.7 1753 49.6 

4.5m 1 x 90° bend 1637 46.3 1616 45.7 

4.5m 2 x 90° bends 1500 42.5 1450 41.0 

7.5m Straight 1734 49.1 1619 45.8 

7.5m 1 x 90° bend 1550 43.9 1497 42.4 

7.5m 2 x 90° bends 1498 42.4 1433 40.6 

15m Straight 1643 46.5 1531 43.3 

30m Straight 1361 38.5 1243 35.2 

industrial wet/dry vacs - aussie pumps 

A complete range of industrial wet/dry vacuum cleaners ranging in capacity from 30 litres through to 75 litres. The Aussie Eco-Clean industrial wet/dry vacs are available with either 

1 or 2 motor combinations. 

Features 

• Impact resist polypropylene barrel 

• 7 metre durable power cable 

• Unique Aussie Microweb, 99% filtration, reusable filter 

• Heavy Duty Wheel Kit 

• Professional accessory kit 

Benefits 

• Powerful suction for effective cleaning 

• Filters fine dust particles like cement dust, gyprock etc 

• Hardwearing, long lasting 

• Easy manoeuvrability 

• Durable and versatile 

• Long reach for commercial applications 

VS72 

VS61 

Model No. 

Capacity 

(Litres) 

Motor 

Water Lift (head) 

mm 

Air Flow 

(m³/h) 

Air Flow 

(l/s) 

Weight 

(kg) 

Dimensions (l x w x h) 

mm 

Clean Air 551 (VS61) 50 1 x 1200w 240v bypass 2200 (215bar) 250 60 22 570 x 530 x 920 

Clean Air 752 (VS72) 75 2 x 1200w 240v bypass 2400 (235bar) 425 119 28 570 x 530 x 970 



At Parchem... 

WE SERVICE WHAT WE SELL 

Parchem have qualified technicians on staff, to service and repair the 

full range of construction equipment. 

Because we know your equipment can be your livelihood, Parchem 

offer: 

• Written quotes on all required repairs 

• All scheduled services 

• A full range of genuine spare parts 

With service departments located across the country, you can feel 

confident of reduced down time. 

So call us for further information, and to book your next service or 

repair. 

NSW – Wetherill Park: 02 9756 5494 

VIC – Brunswick: 03 9380 2400 

QLD – Morningside: 07 3902 2300 

SA – Hindmarsh: 08 8241 6000 

WA – Belmont: 08 6279 9799 


trade stores 

We’ve got 

the gear 

you need 

NEW SOUTH WALES 

Beresfield 02 4964 4277 

Coffs Harbour 02 6652 3599 

Narellan 02 4647 0623 

Padstow 02 9771 6626 

Penrith 02 4722 9259 

Riverstone 02 9627 9133 

Tuggerah 02 4352 2287 

Wetherill Park 02 8781 2051 

AUSTRALIAN CAPITAL TERRITORY 

Fyshwick 02 6228 1313 

QUEENSLAND 

Arundel 07 5500 5600 

Brendale 07 3889 7600 

Gladstone 07 4978 0128 

Morningside 07 3902 2300 

Springwood 07 3808 8133 

Townsville 07 4779 4750 

WESTERN AUSTRALIA 

Belmont 08 6279 9799 

VICTORIA 

Brunswick 03 9380 2400 

Campbellfield 03 9308 6133 

Dandenong 03 8710 7000 

SOUTH AUSTRALIA 

Hindmarsh 08 8241 6000 

TASMANIA 

Moonah 03 6278 7277 

06/13 

Customer Service 1300 737 787 

National Head Office: 7 Lucca Road, Wyong NSW 2259 02 4350 5000 

The range of products will vary by location so please contact your nearest store for the range of products in stock. 

P: 1300 737 787 www.parchem.com.au

FLOORING CATALOGUE - Parchem

Create successful ePaper yourself

Delete template?

Save as template?