SJ700-2 Instruction Manual NT204DX - Hitachi America, Ltd.

Chapter 2 Installation and Wiring
(2) Layout of main circuit terminals
The figures below show the terminal layout on the main circuit terminal block of the inverter.
Terminal layout
Inverter model
R0
T0
R
(L1)
PD
(+1)
S
(L2)
P
(+)
T
(L3)
N
(-)
U
(T1)
RB
V
(T2)
G
W
(T3)
G
SJ700-004-037LFF2
/LFUF2
SJ700-007-037HFF2
004-040HFUF2/HFEF2
charge lump
Jumper connecting
Terminals PD and P
R0 and T0:M4
Ground terminal:M4
Other terminal:M4
[Method of enabling/disabling the EMC filter function]
Dummy plug(green)
Selector pin(J61)
Short plug
To activate EMC filter, please
configure the setting with the
filter activate pin (J61) and
deactivate pin (J62) as indicated
below table.
Please make sure tha the power
is off before modifying the
setting. There is a danger of
electrical shock..
Pleasse be sure to operate the
inverter with the plugs inserted
properly.
Selector pin (J62)
Enabling the EMC filter
(factory setting:xFEF2)
Disabling the EMC filter
(factory setting:xFF2,xFUF2)
selector pin(J61)
Short plug
Dummy plug(green)
selector pin (J62)
Dummy plug(green)
Short plug
2 - 13