SJ700-2 Instruction Manual NT204DX - Hitachi America, Ltd.

More documents

Recommendations

Info

Chapter 4 Explanation of Functions Register No. Function name Function code R/W Monitoring and setting items Data resolution 4 - 148 Register No. 125Fh PID Function Enable A071 R/W 0 (disabling), 1 (enabling), 2 (enabling inverted-data output) - 1260h PID proportional gain A072 R/W 2 to 50 0.1 1261h PID integral time constant A073 R/W 0 to 36000 0.1 [sec.] 1262h PID derivative gain A074 R/W 0 to 10000 0.01 [sec.] 1263h PV scale conversion A075 R/W 1 to 9999 0.01 1264h PV source setting A076 R/W 0 (input via OI), 1 (input via O), 2 (external communication), 3 (pulse train frequency input), 10 - (operation result output) 1265h Reverse PID A077 R/W 00 (disabling), 01 (enabling) - 1266h PID output limiter A078 R/W 0 to 1000 0.1 [sec.] 1267h PID feed forward selection A079 R/W 0 (disabled), 1(O input), 2 (OI input), 3 (O2 input) - 1268h (Reserved) - R/W Inaccessible - 1269h AVR function select A081 R/W 0 (always on), 1 (always off), 2 (off during deceleration) - 126Ah AVR voltage select A082 R/W 200 V class: 0 (200)/1 (215)/2 (220)/3 (230)/4 (240) 400 V class: 5 (380)/6 (400)/7 (415)/8 (440)/9 (460)/ 10 - (480) 126Bh (Reserved) - R/W Inaccessible - 126Ch (Reserved) - R/W Inaccessible - 126Dh Operation mode selection A085 R/W 0 (normal operation), 1 (energy-saving operation), 2 (fuzzy operation) - 126Eh Energy saving mode tuning A086 R/W 0 to 1000 0.1 [%] 126Fh to 1273h (Reserved) - - Inaccessible - 1274h Acceleration (2) time A092 (high) R/W 1275h setting A092 (low) R/W 1 to 360000 0.01 [sec.] 1276h Deceleration (2) time A093 (high) R/W 1277h setting A093 (low) R/W 1 to 360000 0.01 [sec.] 1278h Select method to switch to Acc2/Dec2 profile A094 R/W 0 (switching by 2CH terminal), 1 (switching by setting) - 1279h Acc1 to Acc2 frequency A095 (high) R/W 127Ah transition point A095 (low) R/W 0 to 40000 0.01 [Hz] 127Bh Dec1 to Dec2 frequency A096 (high) R/W 127Ch transition point A096 (low) R/W 0 to 40000 0.01 [Hz] 127Dh Acceleration curve 0 (linear), 1 (S curve), 2 (U curve), 3 (inverted-U A097 R/W selection curve), 4 (EL-S curve) - 127Eh Deceleration curve setting A098 R/W 0 (linear), 1 (S curve), 2 (U curve), 3 (inverted-U curve), 4 (EL-S curve) - 127Fh (Reserved) - - Inaccessible - 1280h (Reserved) - - Inaccessible - 1281h [OI]-[L] input active range A101 (high) R/W 1282h start frequency A101 (low) R/W 0 to 40000 0.01 [Hz] 1283h [OI]-[L] input active range A102 (high) R/W 1284h end frequency A102 (low) R/W 0 to 40000 0.01 [Hz] 1285h [OI]-[L] input active range start current A103 R/W 0 to "[OI]-[L] input active range end current" 1 [%] 1286h [OI]-[L] input active range end current A104 R/W "[OI]-[L] input active range start current" to 100 1 [%] 1287h [OI]-[L] input start frequency enable A105 R/W 0 (external start frequency), 1 (0 Hz) - 1288h to 128Ch (Reserved) - - Inaccessible - 128Dh [O2]-[L] input active range A111 (high) R/W 128Eh start frequency A111 (low) R/W -40000 to 40000 0.01 [Hz] 128Fh [O2]-[L] input active range A112 (high) R/W 1290h end frequency A112 (low) R/W -40000 to 40000 0.01 [Hz] 1291h [O2]-[L] input active range start voltage A113 R/W -100 to "[O2]-[L] input active range end voltage" 1 [%] 1292h [O2]-[L] input active range end voltage A114 R/W "[O2]-[L] input active range start voltage" to 100 1 [%] 1293h to 12A4h (Reserved) - - Inaccessible - 12A5h Acceleration curve A131 R/W 1 (smallest swelling) to 10 (largest swelling) - 12A6h 12A7h to 12AEh 12AFh constants setting Deceleration curve constants setting A132 R/W 1 (smallest swelling) to 10 (largest swelling) - (Reserved) - - Inaccessible - Operation-target frequency selection 1 A141 R/W 0 (digital operator), 1 (keypad potentiometer), 2 (input via O), 3 (input via OI), 4 (external communication), 5 (option 1), 6 (option 2), 7 (pulse train frequency input) -
Chapter 4 Explanation of Functions Register No. 12B0h Function name Function code R/W Monitoring and setting items Data resolution Operation-target frequency selection 2 A142 R/W 12B1h Operator selection A143 R/W 0 (digital operator), 1 (keypad potentiometer), 2 (input via O), 3 (input via OI), 4 (external communication), 5 (option 1), 6 (option 2), 7 (pulse train frequency input) 0 (addition: A141 + A142), 1 (subtraction: A141 - A142), 2 (multiplication: A141 x A142) Register No. 12B2h (Reserved) - - Inaccessible - 12B3h A145 (high) R/W Frequency to be added 12B4h A145 (low) R/W 0 to 40000 0.01 [Hz] 12B5h Sign of the frequency to be 00 (frequency command + A145), 01 (frequency A146 R/W added command - A145) - 12B6h to (Reserved) 12B8h - - Inaccessible - 12B9h EL-S-curve acceleration/deceleration ratio 1 A150 R/W 0 to 50 1 [%] 12BAh EL-S-curve acceleration/deceleration ratio 2 A151 R/W 0 to 50 1 [%] 12BBh EL-S-curve deceleration/deceleration ratio 1 A152 R/W 0 to 50 1 [%] 12BCh EL-S-curve deceleration/deceleration ratio 2 A153 R/W 0 to 50 1 [%] 12BDh to (Reserved) 1300h - - Inaccessible - - - 4 - 149
Page 1 and 2:
HITACHI INVERTER SJ700-2 SERIES INS
Page 3 and 4:
Safety Instructions Safety Instruct
Page 5 and 6:
Safety Instructions 3. Operation !
Page 7 and 8:
Safety Instructions Precautions Con
Page 9 and 10:
Safety Instructions Precautions Con
Page 11 and 12:
Safety Instructions 10. Distributio
Page 13 and 14:
Contents Chapter 1 Overview 1.1 Ins
Page 15 and 16:
Contents 4.2.30 Overload restrictio
Page 17 and 18:
Contents 4.3.15 Speed/position swit
Page 19:
Chapter 1 Overview This chapter des
Page 22 and 23:
Chapter 1 Overview 1.2 Method of In
Page 24:
Chapter 2 Installation and Wiring T
Page 27 and 28:
Chapter 2 Installation and Wiring 2
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Chapter 2 Installation and Wiring D
Page 35 and 36:
Chapter 2 Installation and Wiring S
Page 37 and 38:
Chapter 2 Installation and Wiring c
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Chapter 2 Installation and Wiring (
Page 45 and 46:
Page 47 and 48:
Chapter 2 Installation and Wiring (
Page 49:
Chapter 3 Operation This chapter de
Page 52 and 53:
Chapter 3 Operation You can operate
Page 54 and 55:
Chapter 3 Operation 3.2.2 Code disp
Page 56 and 57:
Chapter 3 Operation Key operation a
Page 58 and 59:
Chapter 3 Operation (3) Code/data d
Page 60 and 61:
Chapter 3 Operation 3.3 How To Make
Page 62 and 63:
Chapter 3 Operation ELB 3-phase pow
Page 65 and 66:
Chapter 4 Explanation of Functions
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Voltage across main circuit termina
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162: Chapter 4 Explanation of Functions
Page 211: Chapter 4 Explanation of Functions
Page 230 and 231: Chapter 5 Error Codes 5.1 Error Cod
Page 232 and 233: Chapter 5 Error Codes Name Gate arr
Page 234 and 235: Chapter 5 Error Codes 5.1.2 Option
Page 236 and 237: Chapter 5 Error Codes 3) Error indi
Page 238 and 239: Chapter 5 Error Codes 5.1.3 Trip co
Page 240: Chapter 6 Maintenance and Inspectio
Page 243 and 244: Chapter 6 Maintenance and Inspectio
Page 250 and 251: Chapter 7 Specifications 7.1 Specif
Page 252 and 253: Chapter 7 Specifications (3) Common
Page 254 and 255: Chapter 7 Specifications SJ700-150
Page 256 and 257: Chapter 7 Specifications SJ700-750
Page 259 and 260: Chapter 8 List of Data Settings 8.1
Page 261 and 262: Chapter 8 List of Data Settings 8.4
Page 263 and 264:
Chapter 8 List of Data Settings AVR
Page 265 and 266:
Chapter 8 List of Data Settings Oth
Page 267 and 268:
Chapter 8 List of Data Settings Cod
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Appendix Upgrading from the SJ300 S
Page 279 and 280:
Index A B C a/b....................
Page 281 and 282:
Index O P O........................
show all

SJ700-2 Instruction Manual NT204DX - Hitachi America, Ltd.

Create successful ePaper yourself

Delete template?

Save as template?