how to use this catalog - Ziamatic Corp

3097 QUIC-LIFT Access Systems
PAGE 3-50
Retrieval without straining
QUIC-LIFT systems are available for ladders on a
horizontal or vertical surface (Model LAS) or on a vertical
surface only (LAS-BHM). A third system is available
for mounting hard sleeves (Model HSS). All three systems
make retrieval a simple operation...easy, without straining.
The QUIC-LIFT system at a glance
1
A close-up view of one high-strength aluminum
casting. Castings come in sets of two.
2 The system in
the storage position.
3 At the flick of a switch, the system
lowers the ladders to a comfortable level for retrieval.
1
You must provide the
following information
when ordering an
LAS system:
1. Manufacturer of
ladders
2. Model number of
ladders
3. Length of ladders
4. End user name,
city, and state
The switch should be mounted outside the operational
envelope of the system in a location providing the operator
with an uninterrupted view of ladders and personnel during
removal and storage operations.
Patent No’s.
5,104,280
D-331,030
Systems are easily installed on existing pumpers or
tankers and require 12 VDC controlled by a 30 amp
two-pole, double-throw momentary switch (provided).
2
Works with aluminum ladders and hard sleeves commonly
carried on fire apparatus. Requires a minimum
compartment shelf of 13” deep.
Keeps ladder and hard sleeves close to the vehicle, when
lowered, for tight apparatus positioning.
Flashing light kit provided to produce a visual signal when
the system is out of the stored position.
Mounting brackets may be attached to castings for storage of
folding ladders and pike poles.
Total height, above the mounting shelf, is 33” for ladders and
30” for hard sleeves. Lowers ladders and hard sleeves 31”
from the stored position.
System mounted over compartments
3
The basic system is made of high strength light-weight cast
aluminum and has a minimum depth of 6”, less ladders.
Powered by two durable high cycle electric actuators
12V), with a maximum load of ladders, hard sleeves, etc.
of 300 lbs. We recommend the manual or electric locking
systems be used whenever a hard sleeve tray is mounted
over the LAS or HSS systems.
Systems have been tested over more than 5,000 operating
cycles.
System lowered for easy ladder removal