how to use this catalog - Ziamatic Corp

3094 QUIC-STEP Manual Pull-Out
Step
PAGE 3-43
The Pull-Out Step can be easily mounted to the bottom of almost
any apparatus. The PS-8 is made to handle the wear
and tear of the fire service.
The PS-8 is made of corrosion resistant steel and a cast aluminum
stepping surface. Built strong enough to withstand active use.
When out, the step drops down 8” to create an optimal stepping
distance. When in the stored position the PS-8 only takes up a
12” x 16-1/4” area, making it easy to fit on most apparatus.
The PS-8 passes NFPA slip resistance standards and sustained a
static load of 500 lbs.
MODEL
DESCRIPTION
WT./SET
IN LBS.
PRICE LIST
PAGE NO.
PS-8 Pull-out step 13.95 22
3094 QUIC-STEP Manual Vehicle Step
The MPOS-24 is designed to sustain a static load of 500 lbs.
This should be taken into account in determining strength
required of mounting surface.
Designed specifically for use on fire and emergency
vehicles. May be retrofitted onto existing apparatus.
The stepping surface is 24” wide x 9.5” deep. When
out, the step drops down 4-7/8”. The surface is a
non-skid surface to provide traction and safety. Also,
it allows mud and debris to fall through rather than
stay on the stepping surface.
The MPOS-24 only requires 26.375” wide x 15” deep
mounting surface allowing it to fit almost anywhere.
MODEL
DESCRIPTION
WT./@
IN LBS.
PRICE LIST
PAGE NO.
MPOS-24 Manual vehicle step 36.0 22