how to use this catalog - Ziamatic Corp

3070 QUIC-MOUNT ® Nozzle Cup Mount
PAGE 3-21
This durable rubber cup mount is the ideal way to mount pre-connected nozzles on fire and
emergency vehicles. Do not use with pistol-grip or play pipes.
Only one hole is required for mounting. Virtually any nozzle may be stored in one of the
four cup models available. Measure diameter at discharge end of nozzle to determine which
cup is required.
Additional cup mounts available for use with SCBA, fire extinguishers and other cylindrical
items. See page 1-30.
All cup mounts below are shipped with a tie down safety strap. The strap has a brass
grommet. The hex head bolt should pass down through the cup, bracket and grommet, with
a lock washer and nut affixed to the bolt.
NOTE: Bracket must be ordered separately.
Cup mount with tie down
safety strap to prevent
accidental loss of nozzle
MODEL
DESCRIPTION
WT./@
IN LBS.
PRICE LIST
PAGE NO.
NCM Cup mount - 3-1/2” I.D. 2.3 17
NCM-1 Cup mount - 5-1/2” I.D. 3.5 17
NCM-B-TFT Cup mount - 3-1/8” I.D. 2.0 17
NCM-H-TFT Cup mount - 4-5/8” I.D. 3.3 17
NCM-BC Bracket - chrome plated 1.1 17
NCM-BR Bracket - red PVC coated 1.1 17
NCM-BB Bracket - black nylon coated 1.1 17
3070-000-110 Tie down strap .2 17
For mounting on vertical surface with top projection - Bolt short 5” side of
bracket to flat vertical mounting surface using four bolts 1/4” dia., lock washers and
nuts (not included). Insert bolt of nozzle cup mount into farthest center hole in long
6-7/8” side of bracket and tighten securely with lock washer and nut provided.
For mounting on flat vertical surface - Bolt long 6-7/8” side of bracket to flat
vertical mounting surface using same size bolts, lock washers and nuts (not included)
as above. Insert bolt of nozzle cup mount into center hole of the farthest 3 holes of
the short 5” horizontal side of the bracket, and tighten securely with lock washer and
nut provided.
3070 QUIC-MOUNT ® Neoprene Post Mount
The nine-inch neoprene post is simple to install and never affected by moisture. It’s
ideal to hold standard play pipe nozzles or stacked couplings. Single 3/8” diameter
hole required for mounting. 4” W (at bottom) x 9-1/8” H (less bolt) x 1-3/8” W (at
top).
MODEL
DESCRIPTION
WT./@
IN LBS.
PRICE LIST
PAGE NO.
NPM Neoprene post mount 1.8 18
NPM 3.25 3-1/4” L NPM for use with MWAB 1.8 18