how to use this catalog - Ziamatic Corp

3097 QUIC-LIFT Access Systems Accessories
PAGE 3-56
Pike poles and folding ladders may be
attached to your QUIC-LIFT System.
Pike pole mounting brackets may be attached directly
to the inside arm castings (shown below), using predrilled
and tapped holes. See pages 3-26 and 3-27 for
pike pole mounting brackets.
MODEL
Reference Manual 3097PM1
DESCRIPTION
WT./SET
IN LBS.
PRICE LIST
PAGE NO.
LAS-FLB Bracket set 2.6 25
LAS-FLB/PPMB Bracket set 1.5 25
To attach pike pole mounting brackets on the front side
of the unit, you must order one set each of the LAS-FLB
castings and the LAS-FLB/PPMB extrusions.
To attach the FLB or FLBA folding ladder bracket to the
system, you will need one set of LAS-FLB castings. See
page 3-35 for the folding ladder bracket.
3097 Light Kit
NFPA 1901-09 Standard requires flashing lights be provided facing
front and rear of apparatus. Lights must continue to flash while the
device is out of the stored position.
All systems are now provided with flashing lights. The audio/visual
alarm will continue to be offered as an option (see pages 3-57 and 8-
43for the audio/visual alarm).
Parts shown below for model LAS-FLK. Components for other kits
may vary slightly.
Drilled and tapped
holes have been provided
on QUIC-LIFT
Systems shipped after
January 1, 1997 to
mount the light kits.
MODEL
DESCRIPTION
WT./KIT
IN LBS.
PRICE LIST
PAGE NO.
LAS-FLK Kit for LAS systems 1.0 25
HLAS-FLK Kit for HLAS systems 1.0 25
PTS-FLK Kit for PTS systems 1.0 25
LAS-HA-FLK Kit for LAS-HA systems 1.0 25