new - the global specialist in energy management - Schneider Electric

Schneider Electric East Mediterranean 

Services Catalogue 

Guarantee your Peace of Mind!

Catalogue Index 

Chapter - 1 

Installation 

Assessment 

Chapter - 2 

Asset 

Management 

Program 

Chapter - 3 

On-Demand 

Maintenance 

Chapter - 4 

Modernization 

Chapter - 5 

Electrical 

Management 

Services 

Chapter - 6 

Educational 

Solutions 

Chapter - 7 

Automation 

Services 

Chapter - 8 

Critical Power 

& Cooling Services 

www.eastmed.schneider-electric.com 

> MP4 Methodology 

A plant wide electrical assessment 

> Network consulting 

Technical Study 

> Emergency On-site Intervention 

Reduce your breakdown time with intervention by an expert 

within a contractual time scale 

> Preventive Maintenance 

Optimize the level of performance of your installation 

> Predictive Maintenance 

Anticipate future breakdowns thanks to regular diagnosis 

of your equipment 

> Spare Parts 

Reduce your breakdown times by having a guaranteed delivery time 

for spare parts 

> Electrical Maintenance Contracts 

Mastering your equipment maintenance optimizes 

the availability of your facilities 

> Transformer Maintenance Services 

Different packs to diagnosis the health of your transformers 

> Retrofit 

Retrofit on switchgear and protection devices 

> Plug & Play 

Retrofit on NW low voltage circuit breakers 

> Energy Saving 

Make the most of your energy SM 

> Educational Solutions 

The Training Catalogue is now available! 

Contact your local Customer Care Centre 

to order your copy or download it at: 


> Automation Systems 

Improve the reliability and availability of your equipment 

> APC InfrastruXure TM 

Services to keep your mission-critical applications operating 

at optimal performance 

T raining by Schneider Electric, 

making you more competitive 

Course Catalogue 

East Mediterranean Countries | 2010 - 2011

Installation Assessment 

MP4 Methodology 

A plant wide electrical assessment 

MP4 consulting services shed light 

on your installation! 

Maximise production levels 

by increasing installation availability and quality 

Improve your OPEX by providing a roadmap 

to optimise your operations and maintenance 

Prioritise your electrical installation investments 

and optimise your CAPEX 

Increase safety reduce levels of electrical risks 

Predict failures & act before they happen 

Replicate some or all recommendations on other sites 

within your organisation 

www.eastmed.schneider-electric.com




Step 1 

Specify your electrical energy 

needs and assess your current 

capabilities 

@ Understand your process & quantify your 

risks 

@ Identify the critical points in your process 

@ Make the link with the electrical network, 

and pinpoint the devices or busbars that 

could trigger these high-risk events 

@ Locate the main energy consumption points 

@ Understand your current and future 

operations & maintenance organisation and 

capabilities 

Example of process modelization and critical points 

Step 2 

Assess equipment and 

evaluate network robustness 

@ For each set of equipment, build a stress 

indicator based on: 

_ environmental conditions (humidity, 

temperature, salinity, etc.) 

_ operating conditions (load rate, number 

of operations, etc.) 

_ equipment ageing 

@ Carry out a reliability study to evaluate the 

robustness of network design with regards to 

the critical points identified in Step 1 

@ Classify each set of equipment according to 

its contribution to the probability of occurrence 

of the unwanted events 

Example of equipment assessment 

Example of electrical risk identification Example of reliability calculation 

Dis_Valti1_P63 

Dis_Valti2_P63 

Dis_Valix_P63 

Dis_ATM_P63 

Dis_Filag_P63 

CM_Bat1_P63 

CM_Bat2_P63 

IM_Arv_VN 

TM_VN 

Dis_TGL_VN 

DisBT_S_Drev 

DisBT_N_Drev 

JDBbt_Lam_TGL 

CabBT_TGL_Drev 

CabBT_TGL_Lam 

EDF, 

Dis_EDF_P63 

Zz_Cab_63kV 

JDB_63kV_P63 

TR1_63kV 

TR2_63kV 

Dis_TR1_P63 

JDB_5kV_P63 

Cab_P63_VN 

Cab_TR1_P63 

JDB_5kV_VN 

Cab_VN_trTIV 

DisBT_geTIV 

CabBT_TR1_TGL 

CabBT_TR2_TGL 

CabBT_TR3_TGL 

... 

Reliability Level 

Low 

Medium 

High


Step 3 

Rate criticality levels 

Combine stress and reliability levels to rate 

the criticality of each set of equipment and 

define the appropriate service policy: 

@ Critical equipment 

(predictive maintenance, emergency recovery 

plan, upgrading action, etc.) 

@ Major equipment 

(preventive maintenance, etc.) 

@ Minor equipment 

(periodic inspection, etc.) 

Example of criticality matrix 

Step 4 

Draw up plans and share conclusions 

Based on the outputs of Step 3, the following deliverables are consolidated: 

@ List of critical safety issues 

@ Upgrading actions necessary to restore nominal installation performance 

@ 4 plans to: 

_ Optimise your operating expenditure (Maintenance Plan) 

_ Improve your performance (Modernisation and Monitoring Plans) 

_ Track the implementation of actions including training, spare parts 

management, recovery plan, etc, (Management Plan). The priority of 

each recommendation and its economic balance sheet are assessed 

@ Formal presentation of conclusions and recommendations to ensure 

good understanding and buy-in by all parties involved



MP4 deliverables 

4 improvement plans including critical safety issues 

The MP4 report allows you to identify critical safety issues such as: 

@ Incorrect breaking capacity 

@ Absence of interlocking devices 

@ Inappropriate protection of people 

@ Unprotected access to live parts, etc. 

Schneider Electric East Mediterranean s.a.l. 

Tabaris, Charles Malek Avenue, Tabaris Centre 1063, 10 th Floor 

P.O. Box : 166223 - Beirut, Lebanon 

Tel. +961 1 204 502 

Fax +961 1 204 458 


Maintenance Plan 

@ A description of the level of maintenance to be performed 

@ The stress and reliability levels of critical devices 

@ A strategy for the maintenance plan schedule 

Modernisation Plan 

@ A list of equipment at the end of its service life and proposals of 

available retrofit solutions 

@ Advice on improving installation performance 

@ Suggestions on how to adapt your installation to meet your new 

business requirements 

Monitoring Plan 

@ A predictive approach to anticipate potential device failure 

@ Energy quality and availability indicators 

@ Opportunities for energy savings in relation to the various solutions 

deployed 

Management Plan 

The plan outlines recommendations targeting: 

@ The safety of people working on the equipment 

@ Service contracts with respect to your subcontracting policy 

@ Management of spare parts 

@ Competency management including expertise and training 

@ Data management through direct access to the Schneider Electric 

expert system 

Cyprus + 357 24 812 649 • customercare.cy@schneider-electric.com 

Iraq + 962 6 516 6260 • customercare.iq@schneider-electric.com 

Jordan + 962 6 516 6465 • customercare.jo@schneider-electric.com 

Lebanon + 961 1 321 645 • customercare.lb@schneider-electric.com 

Syria + 963 11 6124799 • customercare.sy@schneider-electric.com


Network Consulting 

Technical Study 

Schneider Electric Services offer a wide range of network 

consulting solutions. Whether for new installations or for existing 

ones, we ensure the reliability of your assets. 


Schneider Electric service has developed network consulting solutions offering customers 

our expertise in planning, analyzing, optimizing, and managing electrical networks. 

Our mission is to provide integrated technical solutions for expansion, reinforcement or 

refurbishment, and post-incident analysis of electrical networks. 

Network consulting solutions apply to all Medium Voltage equipment. 

Schneider Electric service can propose tailor-made solution, whether you are a private 

or public firm. 

Our dedicated team of experienced engineers can ensure network consulting 

to customers all around the world. 

Network consulting 

for every step 

of your asset management: 

Upstream of the project: 

Feasibility, definition, planning 

During the project: 

When some very specific studies have to 

be performed: for instance optimization or 

performance testing. 

Downstream of the project: 

When network performances have to be 

analyzed and improved


Network Consulting 

Making the most 

of your assets 




Tel. +961 1 204 502 

Fax +961 1 204 458 


Main offer 

According to your present or future needs, our offer includes: 

New project definition 

> Best power supply 

> Network preliminary design 

> Optimization 

Feasibility studies 

> Load forecasts 

> Technical feasibility of customer’s 

solution 

> Selection from different alternatives 

> Technical and budgetary criteria 

Impact studies for new projects and 

extensions 

> Power plant interconnections studies 

> Wind farms 

> Cogeneration 

> Traditional power generation (Thermal, 

Hydro) 

> Reactive power compensation (SVC, etc) 

Network design 

> Network topology with high reliability 

and availability indices 

> Optimum equipment rating: cables, 

OHL, transformers 

> Optimisation of transmission losses 

Equipment preliminary 

specifications 

> Equipment specified to meet customer 

needs and requirements 

> Conductor size (technical and 

economical criteria) 

> Transformer rating 

> Circuit-breakers 

> Substations 

System performance studies for 

existing and future networks 

> Short circuit capability 

> Transient stability 

> Dynamic stability 

> Reliability and availability assessment 

> Switching and lighting transients 

> Insulation coordination 






Asset Management Program 

Emergency 

on-site intervention 


Reduce your breakdown times with intervention 

by an expert within a contractual timescale 

Your needs 

@ Speedy intervention by an expert on your site so that repairs are made as quickly as 

possible 

@ Competent and responsive technical support 

Your benefits 

@ We undertake to attend your site within a contractual timescale in order to ensure a prompt 

response in the event of a fault


Spare parts 


Reduce your breakdown times by having a guaranteed delivery 

time for spare parts 

Your needs 

@ you need to have spare parts to hand so that you can repair faults quickly 

Your benefits 

@ We guarantee to deliver your spare parts (defined at the start of the contract by our experts) 

within a contractual timescale 

@ We offer you a logistics structure for priority spare parts which has been tried and tested 

over a number of years, in order to meet your needs for reduced stoppage times


Medium Voltage Spare Parts 

Power factor 

correction 

Instrument 

transformer 

Fuse 

Switch / 

disconnector 

Contactor 

Circuit breaker 

Protection 

CP 200 

series 

Propivar 

CT, VT 

LPCT 

CT, VT 

MGK 

Tepefuse, 

Fusarc 

CF 

Solefuse 

Fusarc 

CF 

LBSkit 

CTV1 

Rollarc 

GI-E 

Evolis 24 kV 

Evolis HP 

Evolis 

17.5 kV 

SF2 

SF F400 

SF1, SFset 

LFP 

LF 

Sepam 

series 80 

Sepam 

series 20 

series 40 

Sepam 

series 10 

Multifunction protection unit 

for all voltage levels 

RATED VOLTAGE 

Application 

substation 

busbar 

transformer 

motor 

generator 

capacitor 

14400 kvar 

600 kvar 

2500 A 

2500 A 

5000 A 

250 A 

2.5 A 

125 A 

250 A 

1250 A 

250 A 

400 A 

3150 A 

1250 A 

2500 A 

3150 A 

2500 A 

3150 A 2500 A 

3150 A 1250 A 

1250 A 

MAX. RATED CURRENT 

3150 A 5000 A 

Protocols 

Modbus, IEC 60870-5-103, DNP3, IEC 61850 

31.5 kA 

50 kA 

40 kA 

50 kA 

l1 l1 l1 l1 

63 kA 50 kA 63 kA 50 kA 

25 kA 

8 kA 

8 kA 

10 kA 

31.5 kA 

31.5 kA 25 kA 

50 kA 

40 kA 

40 kA 31.5 kA 

MAX. RATED SHORT CIRCUIT CURRENT 

50 kA 40 kA 50 kA 31.5 kA 25 kA 40 kA 31.5 kA 

vacuum / 

SF6 

"all film" 

with or 

without 

internal 

fuses 

dry 

dry 

dry 

SF6 

vacuum 

SF6 

SF6 

vacuum 

vacuum 

vacuum 

SF6 

SF6 

SF6 

SF6 

SF6 

digital 

Power factor 

correction 

and harmonic 

filtering on 

MV networks 

Power factor 

correction on 

MV networks 

or devices 

Outdoor 

Current 

Transformer 

and 

Voltage 

Transformer 

Fixed or 

automatic capacitor 

banks 

for motor, 

substation, 

or global 

distribution 

Ring 

type and 

medium 

voltage 

Low 

Power 

Current 

Transformer 

(LPCT) 

Ring 

type and 

medium 

voltage 

Current 

Transformer, 

Voltage 

Transformer 

Standard 

AFNOR 

Standards 

IEC, DIN, 

UTE 

Standards 

IEC, UTE 

Standards 

DIN, IEC 

Indoor load break 

switch (630 A), 

disconnector and 

accessories 

Vacuum 

withdrawable 

contactor 

Fixed and withdrawable 

contactor with 

magnetic holding or 

mechanical latching 

Outdoor fixed 

circuit breaker 

Fixed circuit 

breaker 

Fixed 

and withdrawable 


With drawable 


Fixed 

and withdrawable 


Fixed circuit 

breaker 

Withdrawable 


Fixed circuit 

breaker 

Fixed circuit 

breaker 

high power 

version 

for power plant 

Fixed and 

withdrawable 


Multifunction unit 

compact and 

flexible 

for all current 

applications 

Fuse for Motor 

measurement protection 

transformer fuse range 

protection up 

to 24 kV 

(Tepefuse) 

and up to 

36 kV 

(Fusarc CF) 

Fuses for 

distribution 

transformer 

from 3.6 kV to 

36 kV 

Side 

mounted 

Front 

mounted 

Front mounted 

Front mounted 

Overcurrent and 

earth-fault relay 

for basic protection 

of feeders 

and distribution 

transformers 

Front or side 

mounted 

mechanism 

Multifunction unit 

intelligent and 

flexible 

for custom 

applications 

(Logipam 

software) 

Thermal 

protection 

included 

Indoor or 

outdoor 

installation 

VIP 

integrated trip 

unit (with out 

auxilary 

power supply) 

in Evoset up 

to 20 kA 

VIP integrated 

trip unit (without 

auxiliary power 

supply) in SFset 

up to 24 kV 

www.eastmed.schneider-electric.com


Preventive 

maintenance 


Optimise the level of performance of your installation 

Your needs 

@ Maintain your electrical equipment regularly, as defined by the 

manufacturer, in order to retain its original operational level 

@ Entrust your installations to a professional in electrical distribution 

who is competent to handle the various technical grades of your 

equipment 

Your benefits 

Manufacturer maintenance: 

@ Governed by international standards 

@ Undertaken by field services engineers 

@ Using special tools and dedicated engineers 

@ Supported by an IBSuite tool guaranteeing compliance 

with service procedures 

@ Finalised by recommendations specified in a detailed report 

We will improve: 

@ Protection of your personnel and equipment 

@ Your continuity of service 

@ The useful life of your equipment 

@ Anticipation of certain problems 

Preventive manufacturer 

maintenance of Vercors 

500 type high voltage 

switchboard 

Preventive manufacturer 

maintenance of an FG2 

circuit-breaker - Fluair 

200 range


Predictive 

maintenance 


Anticipate future breakdowns thanks to regular 

diagnostic of your equipment 

You want to anticipate future electrical failures in order to ensure 

optimum continuity of service on your site 

Our expertise 

For around thirty years Schneider Electric has studied all the 

phenomena leading to malfunctions that might disrupt electrical 

distribution 

Your benefits 

Periodic diagnostics of your electrical equipment: 

@ By skilled experts who have undergone regular training 

@ With specific manufacturer tools continuously updated and 

improved by regular feedback from our factories and on-site 

interventions 

Schneider Electric has your constraints into taken by developing 

two kinds of diagnostics: 

@ Diagnostics without Shut-down 

@ Diagnostics with Shut-Down 

Panorama of Schneider Electric diagnosis tools 

MV 

ProDiag 

ProCorona 

ProSelect 


ProFusion 

Thermography 

LV 

The undesirable 

phenomena in electrical 

distribution are: 

@ Electrical 

o Short-circuit 

o Current overload 

o Overheating 

o Partial discharge, etc 

@ Mechanical 

o Effect of wear on the operating system 

o Effect of wear on the breaking system, etc 

@ Environmental 

o Humidity/ventilation 

o Pollution, etc 

Diagnosis on an FG2 

circuit-breaker using 

ProDiag 

Surface discharges on 

insulators 

Corona effects on a 

charger


Predictive maintenance 

without shut-down 

Your needs 

@ Ensure optimum continuity of service 

@ Cut down or eliminate shut-down times when performing 

maintenance and diagnostic services 

Your benefits 

Diagnosis of your equipment without shut-down: 

@ Low Voltage ; IR Thermography: 

o Check of hot spots on Low Voltage busbars and connections 

o Analysis of results by a qualified expert 

o Recommendations set out formally in a report 

@ Medium Voltage ; ProCorona: 

o Detection of partial surface discharges using ultrasound 

o Audit of Medium Voltage cubicles and station 



We therefore take account of your increasingly restrictive operating 

constraints. 



MV 

ProDiag 

ProCorona 

ProSelect 

Thermal analysis test on Low Voltage busbars 

Example of an 

advanced corona-effect 

phenomenon on Medium 

Voltage insulators 

ProFusion 


Thermography 

LV 

Diagnostics of an Interprotection 

type VM6 

cubicle using Procorona

Predictive maintenance 

with shut-down 

Your needs 

@ Guaranty the continuity of service of your electrical installation 

@ Anticipate future faults 

@ Optimise your maintenance and diagnosis operations 

Your benefits 

In-depth diagnosis with shut-down of your MV/LV equipment: 

@ Medium Voltage and Low Voltage ; ProDiag 

o Study of the circuit-breaker and contactor drive chain 

o Evaluation of the performance of circuit-breakers and contactors 

using the ProDiag tool 

o Analysis of results and trends by a expert who has undergone 

regular training 


@ Medium Voltage ; ProFusion 

o Measurement of the resistance of Medium Voltage fuses 

o Analysis and comparison of results by an expert 


@ Low Voltage ; ProSelect 

o Monitoring of the protection relay on LV circuit-breakers by 

current injection 

o Check of upstream-downstream discrimination 




MV 

ProDiag 

ProCorona 

ProSelect 

; 

; 

; 

ProDiag 

ProFusion 


Thermography 

LV

On-Demand Maintenance 

Electrical Maintenance 

Contracts 

Performance / 

required 

Repair 

Curative cost 

Indirect cost - 

Direct cost - 

Performance / Cost 

No preventive maintenance 

Maintenance is a way to prevent electrical risks that can have an 

operational and financial impact on your operational means. 

Are you measuring the financial impact of non maintenance in 

term of downtime cost ? 

Example of hourly cost of site downtime (¤) 

Oil and Gas 

Mobile telephone systems 

Airline reservations 

Food & Beverage 

Stock-market transactions 

Automotive 

Cement 

Pharmaceutical 

Have you in mind the differences between different maintenance 

strategies in term of costs and performance? 

Maintenance cost increase 

Defective / 

inadequate 

insulation 

5% 

Line disturbance* 

*does not include 

lightning damage 

5% 

Moisture 

9% 

Overload 

7% 

Defected 

equipment 

9% 

Others 

1% 

Lightning 

4% 

Collision 

1% 

Environnement 

8% 

Mandatory 

replacement, 

impossible repair 

Replacement cost 

Equipment 

manufacturer 

life time 

5 years 10 years 15 years 20 years 

th 

Failed Floor intervention 

17% 

Loose connection 

34% 

Performance / 

required 

Repair 

Preventive 

cost 

100 000 

40 000 

90 000 

20 000 

over 1 000 000 

30 000 

15 000 

30 000 

Performance / Cost 

Maintenance cost improvment 

With preventive maintenance 

What are the major causes of equipment failures ? 

planned 

replacement 

Replacement cost 

Equipment 

manufacturer 

life time 

5 years 10 years 15 years 20 years


Electrical Maintenance Contracts 


Do you know the major damages impacting your site and the 

role of electrical equipment failure? 

Water 

streaming 

1% 


2% 

Leakage 

1% 

Explosion 

3% 

Broken 

machin 

5% 

Storm 

6% 

Flood 

10% 

Water 

damage 

1% 

Roberry 

1% Various 

6% 

Fire 

64% 

{ 

Burner 

2% 

Spark 

3% 

Others 

23% 

Static 

electricity 

3% 

Friction 

6% 

Superheating 

7% 

Cigaret 

2% 

Are you aware of the risk occurrence of failures 

if you do not carry out maintenance ? 

Cable terminations 

Cable Joints 

Bus duct 

Switchgear bus insulated 

Disconnect switches 

Transformer 

Circuit breaker 

0% 20% 40% 60% 80% 100% 

Without Preventive Maintenance 

With Preventive Maintenance 

Example: Circuit breaker 

On 100 circuit breakers which failed, 

82% have no preventive maintenance 

and 18% have preventive maintenance 

Work 

by 

hot spot 

6% 

Electricity 

22% 

Arson 

7% 

Radiant 

11% 

Neighbourhood 

1% 

Ignition 

6%




Basing ourselves on your expectations, we offer a range of 

different maintenance contracts, drawn up in the perspective 

of a relationship of trust, based on our expertise and 

compliance with our commitments. 

Our contracts address this criticality by means of : 

@ preventive manufacturer maintenance in accordance with IEC standards, 

@ emergency corrective maintenance with service levels, 

@ management of intervention and equipment data, 

@ a contractual package providing you with improved management of the cost / performance 

ratio of your maintenance. 

Our contracts are tailored for maintenance managers, who are responsible for : 

@ the due and proper financial, operational and human management of your activity, 

@ optimising use of your electrical equipment, 

@ the safety and working environment of your teams. 

Our contracts enable you to : 

Optimise your site’s availability 

n anticipate and limit the number of incidents 

n organise the resources required for optimised and secure incident-management 

n schedule preventive maintenance interventions by adapting to production constraints 

Improve the financial management of your electrical assets 

n control and plan your preventive maintenance costs 

n reduce your corrective maintenance costs 

n assess the indirect costs of downtime and to take action 

n anticipate future investments 

Manage your installed base of electrical equipment in an optimum manner 

n ensure the sustainability of your equipment’s life cycle and performance levels 

n comply with effective norms and standards 

n guarantee the implementation of your maintenance schedule 

n benefit from our recommendations for consulting and expert survey initiatives or projects






Tel. +961 1 204 502 

Fax +961 1 204 458 


The contract formulas 

You have specific operational and financial requirements. Our maintenance contracts 

are drawn-up with your input. So as to meet your requirements, 

we offer three formulas for Electrical Maintenance Contracts : 

The Prevention Contract: 

This ensures optimum performance levels for your electrical facilities by : 

n manufacturer maintenance, 

n emergency support in liaison with our Service teams. 

The Prevention + Package : 

Based on the Prevention Contract, it manages budgetary variations owing to 

intervention time during incidents, due to * option “free support”. 

Under the contract, Schneider Electric assumes the hourly cost of urgent curative 

maintenance. 

The Prevention ++ Package : 

This meets your financial security requirements and optimises the cost of both 

preventive and corrective maintenance due to * option “free support” and ** option 

“free parts”. 

This covers the time, parts and equipment required to restart the malfunctioning 

elements identified in the Contract. 

These formulas may be adapted to your requirements in terms of service level and the scope 

of the services. At your request, additional options may be progressively added to the packages 

in-line with the life cycle of your facilities (e.g.: level 5 maintenance). 

The Prevention The Prevention + The Prevention ++ 

Contract Package Package 

Preventive maintenance (levels 1 to 4) n n n 

Emergency on-site intervention: 8 business hours n n n 

Access to maintenance data n n 

* Option “free support” n n 

** Option “free parts” n 

* Option “free support” 

When the Contract is executed, and throughout its term, the intervention and travel expenses 

for corrective maintenance are estimated, set on a fixed basis, and scheduled. The cost of 

purchasing parts is invoiced in addition to the Contract. 

** Option “free parts” 

The spare parts required to repair recent equipment are subject to a fixed price in the Contract. 

Only material expenses relating to obsolete equipment are invoiced in addition to the Contract. 







Transformer 

Maintenance Services 

Different packs to diagnose 

the health of your transformers 


Our laboratory analyses the dielectric fluid in your 

transformers to ensure safe, efficient and reliable operation. 

TRANSFO SERVICES offers a full range of SERVICE PACKS 

combining a number of analyses. You can choose the analyses 

need without being an expert in chemical engineering. Contents 

range from a check on fluid quality to a complete check-up on 

the condition of your transformer. 

PACK PCB 

Check the level of contamination of liquid dielectric transformers by PCBs or equivalent and 

compliance with environmental legislation (European directive 96/59/CE). (PCB content) (x). 

PACK 1 

Check the quality of the dielectric fluid based on the transformer efficiency of the transformer. 

(For oil, this includes the breakdown voltage, water content, acidity, colour index and general 

aspect. For pyralene, all the above plus dielectric dissipation factor and resistivity checks) (x). 

PACK 2 

Obtain an overall indication of the internal condition of the transformer to prevent electrical 

accidents.(PACK 1 (x) and dissolved-gas check). 

PACK 2+ 

Precisely characterise internal transformer faults for enhanced prevention of electrical 

accidents. (PACK 1, PCB pack and dissolved-gas content) (x). 

PACK 3 

Precisely characterise internal transformer faults and the status of the solid insulation 

to anticipate any problems with the windings. (PACK 1, dissolved-gas content 

and furan-derivatives content) (x). 

PACK 4 

Complete check-up on the transformer. Characterise suspended matter and polar components 

of the dielectric fluid for maximum safety. (PACK 3 (x), metal content, particle counts, tan delta 

(x) and resistivity (x)). 

Accreditations and qualifications


Transformer Maintenance Services 

** Normal : other cases 


Custom analysis: 

@ Interfacial Tension 

@ Gravimetric analysis of deposits 

@ Hydrocarbons content 

@ Flash point 

@ Viscosity 

@ Density 

@ Corrosiveness of the oil (corrosive Sulphur) 

A guide for your pack selection 

Age of transformer Less than 5 years Between 5 and 15 years More than 15 years 

Primary Voltage < 24 KV > 24 KV < 24 KV > 24 KV < 24 KV > 24 KV 

Strong 

types 

of analyses 

PACK 2 or 

PACK 2+ 

PACK 3 PACK 4 

criticality* Frequence 

of analyses 

Every year 

Normal 

types of 

analyses 

PACK 1 or 

PACK 2 

PACK 2+ or PACK 3 PACK 4 

criticality** Frequence 

of analyses 

Every two years 

* Highly criticality : Power autotransformers 5MVA, critical, heavily loaded, step-up or traction transformers and power transformers 5MVA.

Transformer Maintenance Services 

Benefits 

For a reliable diagnostic, Schneider Electric transformer 

maintenance services offer you: 

@ A complete kit of sampling with its simple and detailed operating mode, for an efficient 

manipulation at the fingertips of everybody. 

@ When necessary, a qualified technician in order to realize the sampling. 

Our diagnostic: 

@ Redaction of a simple and detailed analyses report for the assessment of your transformer’s 

health. 

@ History of the analyses for a follow-up on the evolution of your transformer’s health. 

@ Provision of analyses statement guaranteeing the PCB oil content of your transformer. 

Our solutions: 

@ Replacement of the oil charge with processing, 

@ Regeneration and/or decontamination of the oil on site or in workshop, 

@ Rewinding and complete renovation, 

@ End of life processing (removal package, retrofit, destruction), 

@ Etc… 

Our references: 

@ Established in 1989, our laboratory realizes more than 30 000 analyses per year. 

@ The accreditation COFRAC obtained in 2004 is deemed to be the Insurance given to a client 

certifying that the analyses laboratory TRANSFO SERVICES employs each and every effort in 

order to obtain a reliable and reproducible result on the level of the staff competence as much 

as on technical means it uses. This “co-signature” is a strong commitment of impartiality and 

competences.

Schneider Electric 

Services 

Retrofit 

Retrofit on switchgear 

and protection devices

Modernization 

Presentation of the offer 

Introduction 


Today, the productivity, operating safety, continuity of service 

and availability requirements of installations are such that at all 

levels of a company, the quest for high performance is a major 

consideration. 

The experience gained by Schneider Electric in carrying out more than 5000 medium-voltage 

retrofits on Belledonne, Taillefer, Fluair and Vercors cubicles and more than 3000 low-voltage 

retrofits on T140, T12 and Masterbloc switchboards has enabled us to acquire the expertise 

and know-how required to help you secure the loyalty of your customers. 

According to the equipment concerned, Schneider Electric offers different types of services, 

including: 

@ Supplying spare parts, 

@ Modifying cubicles, 

@ Replacing protective devices, 

@ Replacing original devices with latest-generation devices. 

There are various ways of replacing old devices. The most usual methods are: 

Retrofit: the original circuit breaker and its truck are replaced 

@ The connection interfaces (power and low voltage) are adapted for use on the original cubicle. 

@ The new circuit breaker is fitted with the new interfaces. 

@ The solution is tested mechanically with the mounting jig. 

Retrofil: the original truck is retained and fitted with a new circuit 

breaker 

@ The original truck is renovated. 

@ The power interfaces are either retained and renovated or they are recreated. 

@ The new circuit breaker is adapted for mounting on the original truck. 

@ The solution is tested mechanically with the mounting jig. 

Schneider Electric can also implement these solutions with devices manufactured by its 

competitors (Alstom, Calor Emag, ABB, ASEA, BBC, UNELEC, AREVA). 

Many retrofitted devices are in use worldwide. 

Schneider Electric is actively working to improve delivery times and optimise the costs of 

retrofit solutions in order to provide you with constant support and help in ensuring customer 

satisfaction. 

We pay particular attention to quality, which is our major consideration.

Modernization 

Presentation of the offer 

Renovations solutions 


Scope of the offer 

Switchboard renovation 

@ Progressive replacement without modification of customers’ equipment: 

renovation of medium and low voltage switchgear, 

kits for improving equipment. 

@ Complete replacement or addition of cubicles by extension: 

insertion of cubicles into the switchboard with connection ducts, 

addition at the end of the switchboard of cubicles identical to the initial cubicle, 

in accordance with floor space constraints. 

Switchgear renovation 

Replacement of old medium and low voltage switchgear and protection devices by retrofit 

solutions. 

Supply of spare parts 

Ensure the supply of spare parts for equipment that is no longer commercialized by the 

equipment-producing departments. 

Cost-effective solutions to fit your needs 

@ No break in continuity of service, 

@ No added civil engineering work, 

@ No modification of your equipment, 

@ Operating constraints taken into account, 

@ Progressive renovation to fit your budget. 

Validated and tested solutions 

@ Manufacturer’s warranty on renovated equipment, 

@ Factory-validated and tested equipment. 

New solutions 

@ Compliant with the standards in effect, 

@ Integration of new-generation products, 

@ Evolving device technology.

Renovation, retrofit and spare parts solutions 

MV cubicles 

Fluair range Fluair 100 

Commercialization Spare parts supply Spare parts supply 

1980 1998 guaranteed 2010 not guaranteed 2011 

b Complete cubicle 

b Cubicles modification 

b Cubicle spare parts 

b Retrofit/cubicle interface spare part 

b Protection device retrofit (see page 25) 

b Switchgear retrofit 

Old Cubicle 

width 

FG1 

FG2 

New 

630 to 1250 A 7.2 kV 650 mm LF2 

DV2 

630 to 1250 A 7.2 kV 

630 to 3150 A 7.2 kV 900 mm LF3 630 to 3150 A 7.2 kV 

DV2 630 to 2500 A 7.2 kV 

Fluair 100C 

1980 

Commercialization Spare parts supply 

guaranteed 







Old Cubicle 

width 

R400 

R400D 

Fluair 200 

New 

80 to 250 A 7.2 kV 650 mm R400 

R400D 

Spare parts supply 

not guaranteed 

80 to 250 A 7.2 kV 









Old Cubicle 

width 

New 

FG1 630 to 1250 A 12 kV 650 mm LF2 

DV2 

630 to 1250 A 17.5 kV 

FG2 630 to 3150 A 17.5 kV 900 mm LF3 630 to 3150 A 17.5 kV 

DV2 630 to 2500 A 17.5 kV

Modernization 


MV cubicles 

Fluair range Fluair 24G 









b Reworking the original device 

Old Cubicle width New 

F3 400 to 1250 A 24 kV 500 mm F3 400 to 1250 A 24 kV 

Fluair 300 










FG3 630 to 1250 A 24 kV 750 mm FG3 630 to 1250 A 24 kV 

2500 A 24 kV 1000 mm 2500 A 24 kV 

Fluair 400C 










FC4 1250 to 2500 A 36 kV 1100 mm SF2 1250 to 2500 A 36 kV 

Fluair 400G 










FG4 1250 A 24 kV 900 mm SF1 

SF2 

1250 A 24 kV 

1250 A 36 kV 900 mm SF1 

SF2 

1250 A 36 kV 

2500 to 3000 A 24 kV 1100 mm SF2 2500 to 3150 A 24 kV 

2500 A 36 kV 1100 mm SF2 2500 A 36 kV


MV cubicles 

Vercors VM6 range CRM 



1975 1993 

guaranteed 

2008 


2011 






b Reworking the original device 

Old Cubicle 

width 

R400 

R400D 

New 

400 A 12 kV 500 mm R400 

R400D 

400 A 12 kV 

CM / DDM / IM / IMC / NSM / PM / PMC / QM / QMC 



1975 1993 

guaranteed 

2008 


2011 







DM1 / DM2 / DM22 



1975 1993 

guaranteed 

2008 


2011 







Old Cubicle 

width 

New 

FB3 400 to 630 A 24 kV 1000 mm FB4 400 to 630 A 24 kV

Modernization 


MV cubicles 

Vercors VM6 range DM12 




1976 1993 

guaranteed 

2008 


2011 







Old Cubicle 

width 

New 

FB4 400 to 1250 A 24 kV 750 mm FB4 400 to 1250 A 24 kV 

DM23 



1976 1993 

guaranteed 

2008 


2011 







Old Cubicle 

width 

New 

FB4 400 to 1250 A 24 kV 1000 mm FB4 400 to 1250 A 24 kV


Protection device 

retrofit 

Application 

Busbars 

No 

automation 

Measurement 

of I or U 

Sepam 

series 20 

Limited to current 

or voltage protection 

Old protection device made by 

Schneider Electric or competitor 

Applications 

Motor, transformer, 

substation 

Simple 

automation 

Measurements 

of I and U 

Sepam 

series 40 

All types of protection 

except for differential 

New protection 

N.B.: protection renovation should also include the complete study 

of the LV compartment (diagram, cabling, equipment). 

Application 

Generator 

Complex 

automation 

Measurements 

of I and U 

Sepam 

series 80 

All types 

of protection

Modernization 


LV switchboards 

Masterbloc range Masterbloc MB100C 





b Complete column 

b Column spare parts 

b Module replacement 

Masterpact circuit breaker 1250 A, 1000 Vac/Vdc 

Masterpact switch-disconnector 1250 A, 1000 Vac/Vdc 

Masterbloc MB100M 







Compact circuit breaker 3200 A, 1000 Vac/Vdc 

Masterbloc MB200 









b Adaptation 

Compact circuit breaker 1250 A 1000 Vac/Vdc


LV switchboards 

Masterbloc range Masterbloc MB400 









b Rack replacement 

Compact circuit breaker 630 A, 1000 Vac/Vdc 

Interpact circuit breaker 630 A, 1000 Vac/Vdc 

Contactor 500 A, 1000 Vac/Vdc 

Prisma range G / GK / GX / GR / P / PH / UT 




b Complete switchboard 

b Switchboard spare parts 

Prisma Plus range G system / P system / P cubicle 

Wall-mounted P / Floor-standing G 

Wall-mounted Pack 

2003 


guaranteed 

b Complete switchboard 

b Switchboard spare parts 


not guaranteed

Modernization 


LV switchgear 

Withdrawable low-rating Selpact 

Withdrawable truck type Masterpact NT 

Withdrawable high-rating Selpact 

Withdrawable truck type Masterpact NW 


Low-rating Selpact 



1973 1989 

guaranteed 

1998 


2009 

b Device spare parts 

b Retrofit/switchboard interface spare part 

b Device manufacturing 

b Device repairing 


Corresponding functions: v fixed V fixed with pad 

v fixed V withdrawable with pad 

v withdrawable V withdrawable with pad 

v withdrawable V withdrawable with truck 

Old: low-rating Selpact New: Masterpact 

Type Isc (kA) In (A) Type Isc (kA) In (A) 

DN2 50 630/1000 NT H2 50 630/1000 

DR2/DRS2 100 630/1000 NT L1 150 630/1000 

DS2 45 630/1000/1250 NT H2 50 630/1000/1250 

High-rating Selpact 



1973 1989 

guaranteed 

1998 


2009 








v withdrawable V withdrawable with truck 

Old: high-rating Selpact New: Masterpact 


DN2/DS2 50 1600 to 3200 NW H1 65 1600 to 3200 

DN2H/DS2H 70 1600 NW H2 100 1600 

80 2000 to 3200 100 2000 to 3200


LV switchgear 

DA 



1968 1990 

guaranteed 

1998 


2009 








Old: DA New: Masterpact 


DNA1 70 1600/2000 NW H2 65 1600/2000 

100 2500/3200 100 2500/3200 

100 4000/5000 Please consult us 

DNA2 45 630 to 1250 NW H1 65 800 to 1250 

50 1600 to 2500 65 1600 to 2500 

DNAH 100 1600/2000 NW H2 100 1600/2000 

DRA 100 630 to 2000 100 800 to 2000 

DSA1 50 800 to 1250 NW H1 65 800 to 1250 

60 1600/2000 65 1600/2000 

85 2500/3200 NW H2 100 2500/3200 

85 4000 Please consult us 

100 5000 Please consult us 

DSA2 35 800 to 1250 NW N1 42 800 to 1250 

Compact 

45 1600 to 2500 NW H1 65 1600 to 2500 



1981 1997 

guaranteed 

2000 


2002 






Old: Compact New: Masterpact 

Type Poles Function In (A) Type Poles Function In (A) 

C1250 STC 3 P Withdrawable 1250 NT Please consult us

Modernization 


LV switchgear 


Masterpact 



1986 2003 

guaranteed 

2005 


2006 






Old: Masterpact M New: Masterpact NW 

Type Poles Function In (A) Type Poles Function In (A) 

M 3 P Withdrawable 800 to 3200 Plug and Play 3 P Withdrawable 800 to 3200 

Fixed/ 800 to 4000 Masterkit 3 P Fixed/ 800 to 4000 

Withdrawable 

Withdrawable 

Fixed/ 

Withdrawable 

5000 to 6300 Please consult us 

4 P Fixed/ 

Withdrawable 

800 to 6300 Please consult us 

Plug and Play solution 

The Masterpact NW can be mounted in the Masterpact M frame. 

The Plug and Play solution consists of: 

b a Masterpact that has been adapted and fitted with special power connections 

b a fine wire cross-member 

b a pair of corresponding drawers. 

Masterkit solution 

Complete Masterpact M replacement kit. 

The kit consists of: 

b Masterpact NW 

b power connections according to rating 

b frame, in the case of a withdrawable device 

b attachment bracket, in the case of a fixed device 

b wire bundle 

b insulating plate 

b door faceplate 

b screw kit.


Retrofitting 

competitors’ devices 

Medium voltage 

Medium-voltage devices can be replaced according to the retrofit or retrofil principle. 

In the case of medium-voltage devices manufactured by our competitors, the retrofil solution is the simplest and fastest method 

of replacing a customer’s equipment. We can renovate a customer’s original truck and fit it with a Schneider Electric device, 

circuit breaker or contactor. 

The power connection elements are either renovated or reconditioned. 

The devices are then tested for dielectric withstand and overheating and undergo mechanical tests. 

Examples of MV devices 

Brand Type Techno Rating New device 

ABB Contactor C1 Air 250 A 7.2 kV Contactor 

Rollarc R400 

ALSTOM Circuit breaker 

CB411 

DELLE Circuit breaker 

HG3 

Low voltage 

The retrofit principle can be used to replace low-voltage devices manufactured by our competitors. 

Both the device and its truck can be replaced with a complete Schneider Electric device and the 

auxiliaries connections recreated. 

With the retrofit solution, as the devices have already been tested, 

only a power connection overheating test is carried out. 

Oil 2900 A 7.2 kV Circuit breaker 

LF3 


LF3 

BBC Circuit breaker Oil 630 A 7.2 kV Circuit breaker 

LF1 

BBC Circuit breaker Oil 2000 A 7.2 kV Circuit breaker 

LF2 

BBC Circuit breaker 

W-RM/W-RG 

Calor Emag Circuit breaker 

ODM3 

Calor Emag Circuit breaker 

ZE4WL 


DV2 


LF2 


LF2 

CEM Contactor GF SF6 250 A 7.2 kV Contactor 

Rollarc R400 

SIEMENS Circuit breaker Oil 630 A 7.2 kV Circuit breaker 

DV2 

Examples of LV devices 

Brand Type Rating New device 

UNELEC CNP 1000 1000 A 4 P Masterpact NT 10 H1 

UNELEC CS 1250 1250 A 3 P Masterpact NW 12 H1 

UNELEC CS 2500 2500 A 3 P Masterpact NW 25 H1

Monitoring and protecting 

your low voltage network 

Masterpact can be integrated in a general supervision system 

to optimise your electrical installation. 

TCP-IP Ethernet Network 

Local communication with FDM121 

All Masterpact NT / NW circuit breakers can 

be connected to a high-visibility FDM121 front 

display module. Maintenance personnel will 

have convenient access to all data directly 

from the panel of the electrical cabinet. 

Ensuring safety at any time 

Intranet 

Modbus Network 

All Masterpact are equipped with a Micrologic electronic control unit that offers all types of current 

and advanced protection, measurement and communication. Protection functions are separated 

from the measurement functions and are managed by an ASIC electronic component. 

This independence guarantees immunity from conducted or radiated disturbances and ensures 

the highest degree of reliability. 

Optimising the management of your electrical installation 

When equipped with a Micrologic types E, P or H, Masterpact can be integrated in a general 

supervision system to optimise installation operation and maintenance. Alarms may be programmed 

for remote indications. Used with PowerLogic ION Enterprise software, you can exploit the electrical 

data )current, voltage, energy, frequency, power, and power quality( to optimise continuity of service 

and energy management: 

• reduce energy and operations costs; 

• improve power quality, reliability and uptime; 

• optimise equipment use. 

Maximising continuity of service 

Because a LV power supply interruption is unacceptable especially in critical power applications, 

an automatic system is required for LV transfer switching. For your peace of mind, Masterpact enables 

automatic control and management of power sources in your low voltage distribution network 

guaranteeing the hi-reliability of your installation. 

Micrologic Control Units 

All Masterpact are equipped with 

a Micrologic electronic control unit 

that offers a complete set of 

protections and state of 

the art measurements. 

EGX300 gateway-server 

or iRIO RTU 

The EGX300 web-enabled 

gateway-server or the iRIO RTU 

(remote terminal unit) can both 

be used as Ethernet coupler for 

the PowerLogic System devices 

and for any other communicating 

devices operating under Modbus 

RS485 protocol. Data is viewable 

via a standard web browser. 

PowerLogic ION Enterprise 

PowerLogic ION Enterprise 

software is a complete power 

management solution for your 

facility or plant operations. 

It can be connected to Masterpact 

through Ethernet/Modbus protocol. 

"Plug and Play" retrofit solution 

Schneider Electric proposes a fast and simple implementation 

with considerably reducing on-site intervention time 

and get the performance of last generation device. 

30 minutes 




Tel. +961 1 204 502 

Fax +961 1 204 458 


The original Masterpact M chassis is kept 

)no intervention on the switchboard structure( 

and 2 easy operations 

The retrofit solutions use a factory modified 

and adapted Masterpact NW which is installed 

in the Masterpact M’s original chassis. 

Masterpact NW adapted 

for the "Plug and Play" solution 

Masterpact M 

≤ 3200 A 





Syria + 963 11 6124799 • customercare.sy@schneider-electric.com 

EMEDNWBR0411EN 04 / 2011 

"Plug & Play" 

Retrofit on NW low voltage circuit breakers 

Network 

protection 

Compact Supervision 

Masterpact NT and NW 

LV power circuit breakers 630 to 6300 A 

Covering 

all your applications 

Masterpact meets the needs of all types of LV electrical distribution networks. 

Building 

• Hotels 

• Hospitals 

• Offices 

• Retail 

Masterpact UR 

Data Centres 

and Networks 

Whenever high short circuit is involved 

Industry 

• Mining and minerals 

• Automotive 

• Food and beverage 

• Chemical industry 

Masterpact provides an answer to specific applications. 

Masterpact UR is a low voltage ultra rapid opening circuit breaker. Its fault 

detection rate and its reaction speed mean that it will stop a short circuit from 

developing. As a result, this is the key component in very high power 

installations equipped with a number of power sources connected in parallel. 

Masterpact UR truly comes into its own when short circuit currents can reach 

very high levels and when continuity of service is a must: offshore 

installations, cement plants, petrochemical industry. It is also especially 

suited to electrical installations on board merchant ships. 

Energy and Infrastructures 

• Airports 

• Oil and gas 

• Water 

• Electrical energy 

• Marine 

• Wind turbines 

• 1000 V for mines 

• Direct current networks 

• Corrosion protection 

• Switch-disconnectors and earthing switches 

• Automatic transfer switching equipment )ATSE( for emergency power systems 

• High electrical endurance applications: Masterpact NT H2 is a high performance device offering high breaking capacity 

)Icu: 50 kA/480 V( and a high level of discrimination, all in a small volume

Concentrated know-how 

Aiming at standardising electrical switchboards at a time when 

installations are increasingly complex, Masterpact provides an 

unequalled simplicity, both concerning choice and installation. 

Optimised volumes 

Masterpact is the smallest power circuit breaker in the world, concentrating all the performances of a sophisticated power circuit 

breaker in compact dimensions. Masterpact thus optimises the installation and guarantees its operation in complete peace of mind. 

Ease of installation 

Masterpact range has been designed to standardise switchboards and simplify installation: 

• single pole pitch for each physical size: 115/230 mm for NW, 70 mm for NT; 

• incoming connection to top or bottom terminals: front or horizontal or vertical rear connections that can be modified 

on-site without changing the depth; 

• no derating up to 55 °C and 4000 A. 

Maximum security 

The arc chutes absorb the energy released during breaking, thus limiting the stresses exerted on the installation. 

They filter and cool the gases produced, reducing effects perceptible from the outside. 

Masterpact NT Masterpact NW 

All standards 

Masterpact is 

compliant with 

international standards 

IEC 60947-1 and 2, 

IEC 68230 for type 2 

tropicalisation, UL489, 

ANSI/UL1066, CCC 

and GOST. 

More than 

60 

patents 

86% 

of materials can be 

recycled at the end 

of product life. 

Compliance with environmental 

requirements 

The materials used for Masterpact are not 

potentially dangerous to the environment and 

are marked to facilitate sorting for recycling. 

Production facilities are non-polluting in 

compliance with the ISO 14001 standard. 

Common characteristics 

Number of poles 3 /4 

Rated insulation voltage (V) Ui 1000 

Impulse withstand voltage (kV) Uimp 12 

Rated operational volt. (V AC 50 /60 Hz) Ue 690 

Suitability for isolation IEC 60947- 2 

Degree of pollution IEC 60664 -1 3 

Circuit breakers 

and switch-disconnectors 

NT06 to NT16 

Sensor selection 

Sensor rating (A) 250 (1) 400 630 800 1000 1250 1600 

Ir threshold set. (A) 100 160 250 320 400 500 640 

to 250 to 400 to 630 to 800 to 1000 to 1250 to 1600 

(1) For NT02 rating, please consult us. 

Circuit breaker characteristics as per IEC 60947 - 2 NT06 NT08 NT10 NT12 NT16 

Rated current (A) In 40 /50 °C (1) 630 800 1000 1250 1600 

Rating of 4th pole (A) 630 800 1000 1250 1600 

Sensor ratings (A) 400 to 630 400 to 800 400 to 1000 630 to 1250 800 to 1600 

Type of circuit breaker H1 H2 L1 (2) H1 H2 

Ultimate breaking capacity (kA rms) 

V AC 50/ 60 Hz 

Icu 220/ 415 V 42 50 150 42 50 

440 V 42 50 130 42 50 

525 V 42 42 100 42 42 

690 V 42 42 25 42 42 

Rated service breaking capacity (kA rms) Ics % Icu 100% 100% 

Utilisation category B B A B B 

Rated short-time withstand current (kA rms) Icw 0.5 s 42 36 10 42 36 

V AC 50/ 60 Hz 

1 s 42 36 - 42 36 

3 s 24 20 - 24 20 

Integrated instantaneous protection (kA peak ±10 %) - 90 10xIn (3) - 90 

Rated making capacity (kA peak) 

Icm 220/ 415 V 88 105 330 88 105 

V AC 50/ 60 Hz 

440 V 88 105 286 88 105 

525 V 88 88 220 88 88 

690 V 88 88 52 88 88 

Break time (ms) between tripping order and arc extinction 25 25 9 25 25 

Closing time (ms) < 50 < 50 

Circuit breaker characteristics as per NEMA AB1 

Breaking capacity (kA) 

V AC 50/ 60 Hz 

240 V 42 50 150 42 50 

480 V 42 50 100 42 50 

600 V 42 42 25 42 42 

Switch-disconnector characteristics as per IEC 60947- 3 and Annex A 

Type of switch-disconnector HA HA 


Icm 220 V 75 75 

AC23A/AC3 category - V AC 50/ 60 Hz 

440 V 75 75 

525/ 690 V 75 75 

Rated short-time withstand current (kA rms) Icw 0.5 s 36 36 


1 s 36 36 

3 s 20 20 

Ultimate breaking capacity Icu (kA rms) 

with an external protection relay 

Maximum time delay: 350 ms 

690 V 36 36 

Mechanical and electrical durability as per IEC 60947- 2/ 3 at In/Ie 

Service life 

C/O cycles x 1000 

Mechanical without maintenance 12.5 

Type of circuit breaker H1 H2 L1 H1 H2 L1 H1 H2 L1 H1 H2 H1 H2 

Rated current In (A) 630 800 1000 1250 1600 

C/O cycles x 1000 Electrical without maintenance 440 V (4) 6 6 3 6 6 3 6 6 3 6 6 3 3 

IEC 60947 - 2 690 V 3 3 2 3 3 2 3 3 2 3 3 1 1 

Type of circuit breaker or switch-disconnector H1 / H2 / HA 

Rated operationnal current Ie (A) AC23A 630 800 1000 1250 1600 

C/O cycles x 1000 Electrical without maintenance 440 V (4) 6 6 6 6 3 

IEC 60947 - 3 690V 3 3 3 3 1 

Type of circuit breaker or switch-disconnector H1 / H2 / HA 

Rated operationnal current Ie (A) AC3 (5) 500 630 800 1000 1000 

Motor power (kW) 380 /415 V ≤ 250 250 to 335 335 to 450 450 to 560 450 to 560 

440 V ≤ 300 300 to 400 400 to 500 500 to 630 500 to 630 

C/O cycles x 1000 Electrical without maintenance 440 V (4) 6 

IEC 60947 - 3 Annex M/IEC 60947 - 4 - 1 690 V - 

(1) 50 °C: rear vertical connected. Refer to temperature derating tables for other connection types. 

(2) See the current-limiting curves in the "additional characteristics" section. 

(3) SELLIM system. 

(4) Available for 480 V NEMA. 

(5) Suitable for motor control (direct-on-line starting). 

Circuit breakers and 

switch-disconnectors 

NW08 to NW63 

Common characteristics 

Number of poles 3/ 4 

Rated insulation voltage (V) Ui 1000/ 1250 

Impulse withstand voltage (kV) Uimp 12 

Rated operational voltage (V AC 50 / 60 Hz) Ue 690 /1150 

Suitability for isolation IEC 60947 - 2 

Degree of pollution IEC 60664 - 1 4 (1000 V) / 3 (1250 V) 

Sensor selection 

Sensor rating (A) 250 (1) 400 630 800 1000 1250 1600 2000 2500 3200 4000 5000 6300 

Ir threshold setting (A) 100 160 250 320 400 500 630 800 1000 1250 1600 2000 2500 

to 250 to 400 to 630 to 800 to 1000 to 1250 to 1600 to 2000 to 2500 to 3200 to 4000 to 5000 to 6300 

(1) For NW02 rating, please consult us. 

Circuit breaker characteristics as per IEC 60947 - 2 NW08 NW10 NW12 NW16 NW20 NW25 NW32 NW40 NW40b NW50 NW63 

Rated current (A) at 40 °C / 50 °C (1) 800 1000 1250 1600 2000 2500 3200 4000 4000 5000 6300 

Rating of 4th pole (A) 800 1000 1250 1600 2000 2500 3200 4000 4000 5000 6300 

Sensor ratings (A) 400 400 630 800 

1000 

1250 1600 2000 

2000 2500 3200 

to 800 to 1000 to 1250 to 1600 

to 2000 

to 2500 to 3200 to 4000 

to 4000 to 5000 to 6300 

Type of circuit breaker N1 H1 H2 L1 (2) H10 H1 H2 H3 L1 (2) H10 H1 H2 H3 H10 H1 H2 

Ultimate breaking capacity (kA rms) Icu 220 /415/ 440 V 42 65 100 150 - 65 100 150 150 - 65 100 150 - 100 150 

V AC 50/ 60 Hz 525 V 42 65 85 130 - 65 85 130 130 - 65 85 130 - 100 130 

690 V 42 65 85 100 - 65 85 100 100 - 65 85 100 - 100 100 

1150 V - - - - 50 - - - - 50 - - - 50 - - 

Rated service breaking capacity (kA rms) Ics % Icu 100% 100% 100% 100% 

Utilisation category B B B B 

Rated short-time withstand current (kA rms) 

Icw 1 s 42 65 85 30 50 65 85 65 30 50 65 85 65 50 100 100 

V AC 50 /60 Hz 

3 s 22 36 50 30 50 36 75 65 30 50 65 75 65 50 100 100 

Integrated instantaneous protection (kA peak ±10 %) - - 190 80 - - 190 150 80 - - 190 150 - - 270 


Icm 220 /415 /440 V 88 143 220 330 - 143 220 330 330 - 143 220 330 - 220 330 

V AC 50 /60 Hz 

525 V 88 143 187 286 - 143 187 286 286 - 143 187 286 - 220 286 

690 V 88 143 187 220 - 143 187 220 220 - 143 187 220 - 220 220 

1150 V - - - - 105 - - - - 105 - - - 105 - - 

Break time (ms) between tripping order and arc extinction 25 25 25 10 25 25 25 25 10 25 25 25 25 25 25 25 

Closing time (ms) 

Circuit breaker characteristics as per NEMA AB1 

< 70 < 70 < 70 < 80 

Breaking capacity (kA) 240 /480 V 42 65 100 150 - 65 100 150 150 - 65 100 150 - 100 150 

V AC 50/ 60 Hz 

Unprotected circuit breaker characteristics: 

Tripping by shunt trip as per IEC 60947 - 2 

600 V 42 65 85 100 - 65 85 100 100 - 65 85 100 - 100 100 

Type of circuit breaker HA HF (3) HA HF (3) HA HF (3) HA 

Ultimate breaking capacity (kA rms) V AC 50 /60 Hz Icu 220...690 V 50 85 50 85 55 85 85 

Rated service breaking capacity (kA rms) Ics % Icu 100% 100% 100% 100% 

Rated short-time withstand current (kA rms) Icw 1 s 50 85 50 85 55 85 85 

3 s 36 50 36 75 55 75 85 

Overload and short-circuit protection with external protection relay: 

short-circuit protection, maximum delay: 350 ms (4) 

- - - - - - - 

Rated making capacity (kA peak) V AC 50/ 60 Hz Icm 220...690 V 105 187 105 187 121 187 187 

Switch-disconnector characteristics as per IEC 60947 - 3 and Annex A NW08 / NW10 / NW12/ NW16 NW20 NW25 / NW32 / NW40 NW40b / NW50 / NW63 

Type of switch-disconnector NA HA HF HA10 HA HF HA10 HA HF HA10 HA 


Icm 220...690 V 88 105 187 - 105 187 - 121 187 - 187 


1150 V - - - 105 - - 105 - - 105 - 

Rated short-time withstand current (kA rms) 

Icw 1 s 42 50 85 50 50 85 50 55 85 50 85 


Earthing switch 

3 s - 36 50 50 36 50 50 55 75 50 85 

Latching capacity (kA peak) 135 

Rating short time withstand (kA rms) Icw 1 s 60 Hz 

Mechanical and electrical durability as per IEC 60947- 2/ 3 at In/Ie 

3 s 50 Hz 

Service life Mechanical with maintenance 25 20 10 

C/O cycles x 1000 without maintenance 12.5 10 5 

Type of circuit breaker N1 / H1 / H2 L1 H10 H1 / H2 H3 L1 H10 H1 / H2 H3 H10 H1 H2 

Rated current In (A) 800 / 1000 / 1250 / 1600 2000 2500 / 3200 / 4000 4000b / 5000 / 6300 

C/O cycles x 1000 Electrical without maintenance 440 V (5) 10 3 - 8 2 3 - 5 1.25 - 1.5 1.5 

IEC 60947 - 2 690 V 10 3 - 6 2 3 - 2.5 1.25 - 1.5 1.5 

1150 V - - 0.5 - - - 0.5 - - 0.5 - - 

Type of circuit breaker or switch-disconnector H1 / H2 / HA / HF H1 / H2 / H3 / HA / HF H1 / H2 / HA 

Rated operational current Ie (A) AC23A 800 / 1000 / 1250 / 1600 2000 2500 / 3200 / 4000 4000b / 5000 / 6300 

C/O cycles x 1000 Electrical without maintenance 440 V (5) 10 8 5 1.5 

IEC 60947 - 3 690 V 10 6 2.5 1.5 

Type of circuit breaker or switch-disconnector H1 / H2 / HA / HF H1 / H2 / H3 / HA / HF 

Rated operational current Ie (A) AC3 (6) 800 1000 1250 1600 2000 

Motor power 380 / 415 V (kW) 335 to 450 450 to 560 560 to 670 670 to 900 900 to 1150 

440 V (5) (kW) 400 to 500 500 to 630 500 to 800 800 to 1000 1000 to 1300 

690 V (kW) ≤ 800 800 to 1000 1000 to 1250 1250 to 1600 1600 to 2000 

C/O cycles x 1000 Electrical without maintenance 440 / 690 V (5) IEC 60947 - 3 Annex M/IEC 60947- 4- 1 

6 

(1) 50 °C: rear vertical connected. Refer to temperature derating tables for other connection types. (2) See the current-limiting curves in the "additional characteristics" section. (3) Equipped with a trip unit with a making current of 90 kA peak. (4) External protection must comply with permissible thermal constraints of the circuit breaker (please consult us). No fault-trip indication by the SDE or the reset button. 

(5) Available for 480 V NEMA. (6) Suitable for motor control (direct-on-line starting).

Electrical Management Services 

Energy Saving 

Make the most of your energy SM 

Energy and production costs 

You’re looking for ways to make productivity gains 


You’re in a competitive sector 

with strong pressure on profitability 

due to the rising cost of energy 

Energy is having an increasingly 

significant impact on each product 

• You’re looking for a better understanding 

of your energy situation. 

• You want to turn this constraint into an 

opportunity for progress.

Electrical Management Services 

Energy Saving 

Schneider Electric Solutions 




Tel. +961 1 204 502 

Fax +961 1 204 458 


Implementation of quick-win solutions 

Power Factor Correction 

& Harmonic Filtering 

Benefits 

@ Remove reactive power charges 

from your energy bill and reduce 

your energy bill by 5 to 10% 

@ Eliminate nuisance trippings 

and down time 

@ Preserve lifetime of motors and 

sensitive equipment 

@ Increase availability of power 

for future expansion 

@ Reduce capital expenditure 

for expansion 

Variable Speed Drives Power Monitoring & Control 

Benefits 

@ Reduce energy bill (up to 30%) 

and CO 2 emissions 

@ Remove your investment risk 

@ Solutions operate transparently 

once installed 

@ Increase lifespan of equipment 

@ Reduce maintenance cost and 

down time 

Implementation of full solutions for specific applications 

Power monitoring, all fluids and energies 

> Gain: consumption that closely fits industrial needs 

> Studies: outside production periods or cycles and during production cycles, analysis 

of production start-up and shutdown. 

Compressed air 

> Gain: detection of leaks and adaptation of operating pressure, efficiency 

> Measurement of flow rates, analysis of consumers and operating costs 

Positive cold refrigeration, process cooling, industrial water 

> Gain: organisation of refrigerating power, leak detection, adaptation of operating 

pressure, efficiency 

> Measurement of flow rates, analysis of consumers and operating costs 

Behaviour and communication 

> Gain: empowerment regarding the link consumption / production 

> Best practices on the part of management and production operators 

Indoor and outdoor lighting 

> Gain: optimisation of lighting periods 

> Measurement of lighting, automation, compliance with standards, technologies 

HVAC, hot water, overheated water, steam 

> Gain: optimisation of fluid flow rates and circulation, efficiency 

> Measurement of fluid flow rates, gas flow rates and combusion, analysis of uses 

and operating costs 

> Study of premise occupants’ comfort, sectorisation 

Benefits 

@ Reveal opportunities to cut 

energy costs 

@ Manage and operate your 

installation: 

- Predict and prevent downtime 

- Optimise capacity and utilisation 

- Decrease capital expenditure 

- Maximise uptime and savings 

through efficient planning and 

analysis 






Technical education 

Educational Solutions 

Catalogue 2011


The OFMOD concept 

Modular offer: a new concept for teaching automation 

systems and electrical distribution 

This new offer contains educational modules allowing you to create any kind 

of configuration. Changing from a simple configuration to one that is more 

developed is done very flexibly by adding additional modules. 

The diversity of modules allows you to mix different types of components 

within the same automation system architecture: 

@ electromechanical motor starters 

@ electronic motor starters 

@ programmable logic controllers linked to human-machine interface terminals 

@ control-system architectures etc. 

@ tertiary electrical installation 

@ installation with KNX bus 

@ machine safety 

@ etc. 

Modules geared towards construction allow you to progress to installations 

implementing energy efficiency. 

The simple operational parts allow you to illustrate the applications being 

developed. 

3

4 

Electrical Energy 

Distribution 


Installation 

5 

> LV switchboard for professional school teaching 

6 new > Fire safety system 

Energy Control 7 > Motor starter bench 

Energy Efficiency 8 > Heating control bench 

Data Acquisition 

and Processing 

9 

10 

11 new > Lift 

12 

13 

14 

> Reactive energy compensation 

> Harmotris: 

3-phase network harmonic interference bench 

> Hanged cage surface treatment equipment 

> Automatic door 

> Comsi case

Electrical Energy Distribution 

LV switchboard for 

professional school teaching 

Teaching Objectives 

@ To study the hardware of a main 

switchboard 

@ To control distribution 

@ To manage energy 

Electrical and 

mechanical data 

@ Power supply: 

400 V 3-Ph + ground 

@ Size (H x W x D) - weight: 

2310 x 1000 x 530 mm - 214 kg 

Main industry 

@ Electrotechnical professional school 

This cabinet contains: 

@ a main power supply 

@ a residual current device at the head and a 

@ switch-disconnector with visible breaking 

@ a busbar 

@ a measurement unit equipped with a 

configurable alarm device 

@ an emergency stop device on the cabinet and 

@ the possibility of remote installation of at least 

one other emergency stop point 

@ feeder control using ON/OFF pushbutton 

+ indication 

@ connection of power supplies and feeders 

at the back of the cabinet 

@ cabinet access from the front and back 

(for exercises and accreditation) 

@ a light beacon at the top to indicate power on 

@ safety devices conform to current standards. 

Un-wired rear face 

Package description 

This cabinet is used to: 

@ perform cabling and accreditation tasks with intervention on busbars 

@ take measurements (intensity, simple and composite voltages, active, 

reactive and apparent power, power factor and phase order) 

@ take measurements using an oscilloscope and hook-on ammeter 

@ distribute electrical energy on 6 separate feeders. 

It can be supplied in a mounted, non-cabled version delivered with an Accessories 

kit to carry out cabling operations. 

Proposed as an option: 

@ accessories batch (wires, tags, cable ends and sheaths) 

@ tooling batch (screwdriver, clamps, allen keys). 

In the workshop, the cabinet will be used to supply: 

@ systems separately 

@ the spatial production area (3D cells) 

@ the panel-builder’s workstations 

@ a lighting area 

@ the cabinet cabling stations 

@ the “study” zone with the microcomputers. 

To order 

MD1AA720: cabled LV switchboard 

MD1AA720NC: non-cabled LV switchboard 

MD1AA728: accessories kit 

MD1AA728P4: accessories kit (Q = 4) 

MD1AA729: tool kit 

5


Electrical Installation 

Fire safety system 

Teaching objectives 

@ To study how a fire safety 

system works 

@ To find out about and install 

the components of a fire safety system 




230 V AC + E 


1800 x 1000 x 600 mm – 120 kg approx. 

Main industries 

@ Electrical engineering 

@ Energy engineering 

6www.eastmed.schneider-electric.com 


The fire safety system control bench is a chassis mounted on castors, 

it includes: 

@ an enclosed 127-point addressable control centre with alarm management unit 

@ a central unit for fire safety settings 

@ a splitter box control panel with LCD screen 

@ an interactive, addressable, optical smoke detector 

@ an interactive, addressable thermo-velocimetric heat sensor 

@ two addressable, manual releases 

@ an action indicator 

@ a sound diffuser 

@ an electromagnetic release 

@ a smoke detector test gas cannister 

@ a kit comprising holder, pushbuttons and safety devices needed for it to 

operate properly. 

The products are installed on a workspace equipped with safety sockets and are 

ready to use. Operations on this bench are performed in total safety due to the 

exclusive use of safety cables for establishing connections. 

This bench is used to: 

@ signal data from the automatic sensors and manual releases 

@ locate the start of the fire 

@ trigger sound diffusers 

@ halt the broadcasting process in the case of unjustified triggering 

@ operate in restricted standby mode. 

To order 

new 

MDG99130A: Fire safety system

Energy Control 

Motor starter bench 


@ To study typical diagrams of 

electromechanical and electronic 

motor starters 

@ To combine power control components 

@ To measure the circuit voltages and currents 

@ To calculate torque, power and energy 

@ To study protection 




400 V triple phase + N + E / 2 kVA 


1950 x 700 x 700 mm - 190 kg 



Other industries 

@ Mechanical engineering 

@ Industrial technology 

Manual panel Automatic panel 


This bench allows motor starters to be studied chronologically: 

@ implementation of the most common diagrams: 

_ DOL starting 

_ star-delta starting 

_ reversing starting 

_ starting with electronic starter. 

@ combining power control components: 

_ switch 

_ isolator 

_ contactor 

_ thermal overload relay 

_ compact Tesys U starter. 

@ measurement of circuit voltages and currents 

@ calculation of torque, power and energy 

The motor starter bench includes: 

@ two autonomous and independent work panels with industrial components 

connected to safety sockets 

@ one panel for analysing and connecting the power circuit 

@ one panel for analysing and connecting the power and control circuit 

@ a plinth with 2 units (230 V AC - 185 W motor / 190 V DC - 280 W generator) 

@ two adjustable load rheostats 

@ a voltmeter to measure the voltage at each point of the circuit 

@ ammeters for each motor phase and for the load 

@ wiring accessories compliant with safety standards 

Motor starters are built using the following types of component: 

@ basic function components, such as the Vario switch, LS1D isolator, LC1 / LC2 

contactors, class 10 LRD thermal overload relay 

@ components with multiple or integrated functions, such as the GV2 circuit 

breaker, Integral 18, TeSys U motor starter or ATS01 starter. 

To order 

MD1AA540: motor starter bench 

7


Energy Efficiency 

Heating control bench 


@ To use and program the control 

functions of a Premium PLC 

@ To understand and configure the operation 

of a control loop 




230 V T / 2000 VA 


1800 x 1000 x 1000 mm - 120 kg 



@ Control and monitoring 



The heating control bench is used to study a central heating system with 

control loops. 

The operational part represents a reduced central heating system comprising: 

@ a 3-way motorised valve 

@ a variable speed pump (circulator) 

@ a heat exchanger (fan-cooled heatsink). 

The control part includes a Premium PLC which provides all the control 

operations, an Altivar variable speed drive and all the associated electrical 

protection elements. 

A graphic operator interface terminal is used to control and monitor the system. 

An Ethernet connection allows you to connect a computer and control 

supervision remotely. 

The system is configured to use one of the three following control loops: 

@ PID loop: central heating with internal temperature sensor 

(acting on the water flow) 

@ PID loop + servo: central heating with internal temperature sensor 

(acting on the three-way valve) 

@ PID loop: central heating with external temperature sensor and water 

ratio (acting on the three-way valve). 

The system can be disturbed using a set of three motorised fans of variable 

speed. 

To order 

Close-up view of 3-way valve 

MD1AE895PR: heating control bench


Reactive energy 

compensation 


@ To modify, identify and rectify the 

power factor in an installation 

@ To highlight and study the influence of: 

_ harmonics phenomena on capacitors 

_ inrush currents when capacitors are 

switched on 

@ To implement suitable solutions 




230 V single-phase + ground /



Harmotris: 3-phase network 

harmonic interference bench 


@ To study problems of electrical 

interference in a 3-phase installation 

@ To implement the relevant solutions 

@ To analyse third harmonic and neutral 

heating phenomena 




400 V 3-phase + N + ground /

Data Acquisition and Processing 

Lift 


@ To understand how to program and 

implement a PLC 

@ To study the timer, counter and storage 

functions of a Grafcet 

@ To manage priorities and allocate tasks 




230 V single phase + ground / < 150 VA 


_ control unit: 

300 x 290 x 210 mm - 5 kg 

_ operational unit: 

1015 x 615 x 635 mm - 24 kg 






new 


Operating unit 

@ a 5-floor lift with: 

_ landing door contact 

_ car floor call control 

_ landing call buttons 

_ car arrival sensors. 

Control unit 

@ a PLC mounted and wired to a support: 

_ TSX Micro or Twido or M340 

_ two ribbon cables for quick connection 

to the operating unit. 

To control 

MD1AE254: lift operational part 

MD1AE257: TSX Micro complete lift 

MD1AE257MR: M340 complete lift 

MD1AE257TW: Twido complete lift 

For the control part only, please consult us 

11



Hanged cage surface 

treatment equipment 


@ To approach sequencial programming 

@ To manage the stop/start modes of an 

automated system (DGOSM) 

@ To study the Grafcet and its timer, counter 

and storage functions 






_ micro control unit: 

210 x 380 x 350 mm - 5 kg 

_ Twido control unit: 

170 x 290 x 310 mm - 2 kg 

_ operating unit: 

400 x 700 x 350 mm - 18 kg 




Other industry 




The operating unit modelling a surface treatment system includes: 

@ a double-motion hanged cage 

@ a loading/unloading station. 

The control unit includes: 

@ a TSX Micro or Twido or M340 PLC 

@ a base with connection layers. 

To order 

MD1AE224: surface treatment operational part 

MD1AE227: TSX Micro complete lift 

MD1AE227MR: M340 complete lift 

MD1AE227TW: Twido complete lift 

For the control part only, please consult us


Automatic door 


@ To learn and understand automated 

system structures 

@ To analyse operation by wired or programmed 

logic 

@ To study and comply with safety rules and 

user protection devices 

@ To program door operation (list, Ladder, 

Grafcet) 






_ control unit: 

700 x 300 x 700 mm - 37 kg 

_ operational unit: 

540 x 600 x 600 mm - 22 kg 







Operating unit 

The “Safe Automatic Door” teaching module consists of a swinging door implementing 

all the operation safety devices required by relevant standards: 

@ XUL photoelectric barrier cells with double output contact 

@ mobile panel obstruction detection by XUD optic fibres and photoelectric cells 

@ mechanical open/close end-of-travel switches 

@ door motion indicator lamps 

@ safe access zone lighting indicators. 

Mechanical motion is controlled by an AC motor with a speed reducer and 

an adjustable torque limiter. 

The mobile panel is driven by pinion and chain gear with ball bearing rail guides. 

Control unit 

An industrial electrical box includes: 

@ the standard protection devices: fuse isolator, thermal magnetic circuit 

breaker and thermal relay 

@ the components needed to achieve the two operating modes 

@ depending on the version, the PLC is a TSX Micro (16I/12O), a Twido 

(16I/12O) or a Zelio (12I/8O) module 

@ in manual mode, door motion and safety devices are controlled by limit 

switches 

@ in automatic mode, the motion and safety devices, keyboard access and 

signals are controlled by a PLC. 

To order 

MD1AE774: automatic door operational part 

MD1AE176: TSX Micro control part 

MD1AE177: TSX Micro complete assembly 

MD1AE173TW: Twido control part 

MD1AE175TW: Twido complete assembly 

MD1AE173ZL: Zelio control part 

MD1AE175ZL: Zelio complete assembly 

13



Comsi case 


@ To study Ethernet and ASi 

communication tools 

@ To program a PLC in PL7 




230 V single-phase /

Automation Services 

Automation Systems 

Improve the reliability and availability 

of your equipment 

Spare parts 

Be able to get operations started again as 

quickly as possible after a failure by having 

a spare part or equivalent solution available 

on site. 

Standard 

exchange 

and repairs 


Our offer : 

@ the supply from our stock of tested and certified equipment and 

spare parts compatible with your installations, 

@ the use of genuine parts with original manufacturer quality, 

@ the recycling of your old configurations modernised with spare parts 

updated and certified by the manufacturer, 

@ the supply of spare parts beyond the commercialisation period. 

Benefits for you : 

@ limit down time thanks to our service stock, 

@ have access to services after the end of commercialisation of products, 

@ have access to our stocks at any time, on a contractual basis 

in case of emergencies. 

@ Benefit from service on products no longer commercialised. 

@ Have a manufacturer’s technician come to your site to repair the 

faulty equipment. 

@ Find a good compromise between price and servicing time. 

Our offer : 

@ repair of the faulty equipment on our premises or on your site, 

@ standard exchange of certain parts. 


@ the repaired parts are checked and overhauled, and wear 

components are replaced, 

@ the complete part is guaranteed, not only the faulty component, 

@ with standard exchange of some parts, you get good prices and a 

fast response.

Automation Services 

Automation Systems 

On-site 

services 

Retrofit 

If you would like a turnkey solution for 

the replacement of your automation 

products, we have created a complete 

modernisation offer to help you to make 

your project a success : 

@ Full handling of your migration (application 

software and hardware) 

@ Project management with your partners or 

direct 

@ Commitment to results regarding down time 

@ Multi-site deployment 


Benefit on site from the expertise 

of our technicians : 

@ in case of a fault, get operations started again as quickly as possible 

to limit losses and risks, 

@ be sure that the equipment is started up as recommended by the 

manufacturer, 

@ obtain validation from the manufacturer that a variable speed drive, 

PLC, network, human-machine interface, architecture or supervision 

system has been installed, 

Our offer : 

On-site services by our technicians and experts, using manufacturerspecific 

tools for an in-depth diagnosis of your equipment. 


@ limit down time by relying on our knowledge of our products and your 

business, 

@ be certain that the inspected or commissioned equipment will meet 

requirements to ensure optimal production quality. 

Your situation : 

@ you have equipment that can still give you many more years of service 

mechanically speaking, but you are having more and more difficulty 

with the maintenance of the electrical part, which reduces reliability, 

@ the maintenance costs for the electrical part of this ageing equipment 

are going up substantially, 

@ you want to increase the performance of your equipment by using 

more recent automation products including the latest technologies, 

@ you want to upgrade your equipment to comply with new standards. 

Our offer : 

@ technical retrofit solutions, allowing you to benefit from our expertise 

and considerably reduce the risks and down time linked to cabling and 

mechanical adaptation operations, 

@ retrofit with little or no revision of the application software or product 

settings, 

@ in case application software modifications are necessary, our 

modernisation offer has been designed to meet your specific needs. 


@ extend your equipment service life without investing in costly new 

machines, 

@ reduce down time for retrofit thanks to our technical solutions.

Critical Power & Cooling Services 

APC InfrastruXure TM 

Services to keep your mission-critical applications 

operating at optimal performance 


Maintain & Optimize 

Your mission-critical applications at maximum efficiency 

When it comes to maintaining and operating your mission-critical applications, your primary 

concern is keeping your equipment running at maximum efficiency and optimal performance. 

Proper care and regular maintenance will help you avoid unnecessary downtime, saving you 

headaches, time and money. 

Schneider Electric Critical Power & Cooling has the services to support you in these efforts 

and protect your investment. Our services portfolio is designed to ensure your applications 

receive the care they need to operate efficiently. Preventive Maintenance, On-Site Service, 

Remote Monitoring, Extended Warranty, and Training services may be ordered individually 

(see product description below), or as a package at discounted prices (see package 

descriptions at right). 

Services to help you MAINTAIN 

and OPTIMIZE your mission-critical applications 

On-Site Service 

Get the help you need on location to bring your business back 

up and running in a time frame compatible with your business 

requirements. 

Our Field Service Engineers arrive on-site to isolate and correct the problem in as little time as 

possible, minimizing downtime. 

Service Pack Extended Warranty 

Provides an extension of coverage beyond the factory warranty 

In the unlikely event of a failure of your single-phase UPS, your product will be repaired or 

replaced quickly, minimizing downtime. 

Our warranty guarantees free delivery of parts or unit to ensure you get what you need as 

soon as you need it. 

Options available: 

• 1 Year 

• 3 Year

Critical Power & Cooling Services 

APC InfrastruXure TM 




Tel. +961 1 204 502 

Fax +961 1 204 458 


Training 

Award-winning trainers give you the skills you need to increase 

the availability and productivity of your equipment while 

decreasing support requests. 

Our InfraStruXure ® Orientation and Training Service increases your understanding and ability 

to interface with your ISX solution. Training is also available on industry technologies and 

trends. 

Preventive Maintenance Services 

An examination of your system to ensure optimal performance 

and prevent problems before they occur 

Power and air systems contain components and parts that will wear out over time. Depending 

on your product and its environment, we’ll help you choose from the following options: 

• Monthly Preventive Maintenance 

• Quarterly Preventive Maintenance 

• Semi-annual Preventive Maintenance 

• Annual Preventive Maintenance 

All of these maintenance services are available with an option to schedule service outside of 

normal business hours 

Battery Replacement 

Provides you with new batteries when needed, guaranteeing 

your system is backed up appropriately 

Battery service and replacement is a vital component of any UPS maintenance program since 

even one failed battery can compromise an entire system. Whether it is necessary to replace 

one or all of your batteries, we will provide you with the new batteries required for reliable 

back-up. 

Decommissioning/Removal/Disposal 

End-of-life treatment of your equipment 

Safe and efficient dismantling and removal of your old equipment, including proper disposal, 

complying with international regulations regarding handling end-of-life electrical equipment, 

and recycling of waste

new - the global specialist in energy management - Schneider Electric

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?