Table of Contents - The Atmospheric Studies Group at TRC

Table of Contents - The Atmospheric Studies Group at TRC Table of Contents - The Atmospheric Studies Group at TRC

29.01.2015 Views

Section 9: CALPUFF Table 9-3 (Continued) CALPUFF Control File Inputs - Input Group 15 Line Source Parameters Variable Type Description Default Value (Input Group 15c - Variable Emissions Scale Factors) SRCNAM character*12 Source name, used to coordinate inputs in Subgroups b,c - IVARY integer Type of scale factor variation (diurnal, monthly, etc.) 0 = Constant 1 = Diurnal cycle (24 scaling factors: hours 1-24) 2 = Monthly cycle (12 scaling factors: months 1-12) 3 = Hour & Season (4 groups of 24 hourly scaling factors, where first group is DEC-JAN-FEB) 4 = Speed & Stab. (6 groups of 6 scaling factors, where first group is Stability Class A, and the 6 speed classes have upper bounds (m/s) defined in Group 12) 5 = Temperature (12 scaling factors, where temperature classes have upper bounds (C) of: 0, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 50+) 0 QFAC real array Array of emissions scaling factors for this source and the species indicated - The variables in Input Group 15c are entered for each line source - species combination indicated by NSLN1 in Input Group 15a (e.g., only NSLN1 combinations are entered). The data for each line sourcespecies combination (i.e., source name, type of variation, and the QFAC array ) are treated as a separate input subgroup and therefore must end with an input group terminator (i.e., !END!). Once again, the source number is an optional user comment which is outside of the delimiters. The source name is used to place the scaling factors with the correct source. The data for each source-species combination must follow an opening delimiter and "(cspec)=", where (cspec) is a species name defined in Group 3. The data for each source-species combination is followed by a closing delimiter and an input group terminator 9-110

Section 9: CALPUFF (i.e., !END!). If NSLN1=0, no scaling factors should be defined here. 9-111

Section 9: CALPUFF<br />

(i.e., !END!). If NSLN1=0, no scaling factors should be defined here.<br />

9-111

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!