Table of Contents - The Atmospheric Studies Group at TRC

Section 1: Introduction
QAGRID.BNA
borders (km) for the METEOROLOGICAL,
COMPUTATIONAL, and SAMPLING (when
LSAMP=T) grid domains, in Atlas Boundary File
format
IOQA
Formatted
QARECD.DAT
x,y coordinates (km), elevation (m), and height above
ground (m) of discrete receptors, created only when
discrete receptors are used (NREC>0)
IOQA
Formatted
Table 1-6 (Concluded):
Summary of CALPUFF Output Files
Default
File Name
Contents
Unit*
Number
Type
QARECG.DAT
x,y coordinates (km), and elevation (m) of gridded
receptors, created only when gridded receptors are
used (LSAMP=T)
IOQA
Formatted
QARECT.DAT
x,y coordinates (km), and elevation (m) of CTSG
receptors, created only when CTSG receptors are used
(NCTREC>0)
IOQA
Formatted
QAPNTS.DAT
x,y coordinates (km), elevation (m), and source index
of point sources, created only when point sources are
used
IOQA
Formatted
QAVOLS.DAT
x,y coordinates (km), elevation (m), and source index
of volume sources, created only when volume sources
are used
IOQA
Formatted
QAAREA.BNA
outlines (km) for area sources, in Atlas Boundary File
format, created only when area sources are used
IOQA
Formatted
QALINE.BNA
segments (km) for buoyant line sources, in Atlas
Boundary File format, created only when line sources
are used
IOQA
Formatted
LUSE.CLR
Default land-use color map file for SURFER, always
created
IOQA
Formatted
* Variable shown is the parameter controlling the FORTRAN unit number associated with the
file. Usually, the value assigned to the parameter is consistent with the name (i.e., IO8 = 8).
However, the value can be easily changed in the parameter file to accommodate reserved unit
numbers on a particular system.
1-43