Table of Contents - The Atmospheric Studies Group at TRC

Section 9: CALPUFF
Table 9-3 (Continued)
CALPUFF Control File Inputs - Input Group 5
Output Options
Variable Type Description Default Value
IMBAL integer Control variable for creating output disk file
(MASSBAL.DAT) for mass balance results
(0 = do not create MASSBAL.DAT,
1 = create MASSBAL. DAT)
INRISE integer Create a file with plume properties for each rise increment
for each model time step (0 = no, 1 = yes)
ICPRT integer Control variable for printing of concentration fields to the
output list file (CALPUFF.LST).
(0 = do not print any dry fluxes,
1 = print dry fluxes indicated in output table)
IDPRT integer Control variable for printing of dry flux fields to the output
list file (CALPUFF.LST).
(0 = do not print any dry fluxes,
1 = print dry fluxes indicated in output table)
IWPRT integer Control variable for printing of wet flux fields to the output
list file (CALPUFF.LST).
(0 = do not print any wet fluxes,
1 = print wet fluxes indicated in output table) 0
ICFRQ integer Printing interval for the concentration fields. Concentrations
are printed every “ICFRQ” time steps. (Used only if ICPRT
= 1.)
IDFRQ integer Printing interval for the dry flux fields. Dry fluxes are
printed every “IDFRQ” time steps. (Used only if IDPRT =
1.)
0
0
0
0
0
1
1
IWFRQ integer Printing interval for the wet flux fields. Wet fluxes are
1
printed every “IWFRQ” time steps. (Used only if IWPRT =
1.)
9-72