Table of Contents - The Atmospheric Studies Group at TRC

Section 8: CALMET Model Files
Table 8-4 (Continued)
Input Group 5 - Wind Field Options and Parameters
Variable Type Description Default Value
ZUPWND real array Bottom and top of layer through which the initial-guess
winds are computed. Units: meters. (Used only if
IDIOPT3=0.) Note: Two values must be entered (e.g.,
! ZUPWND=1.0, 2000. !).
IDIOPT4 integer Control variable for surface wind components.
(0=compute internally from surface data, 1=read
preprocessed values from the file DIAG.DAT.)
IDIOPT5 integer Control variable for upper air wind components.
(0=compute internally from upper air data, 1=read
preprocessed values from the file DIAG.DAT.)
LLBREZE logical Control variable for lake breeze region option.
LLBREZE=T, region interpolation is performed.
LLBREZE=F, no region interpolation is performed.
NBOX integer Number of boxes defining region (used only if
LLBREZE=T)
XG1 real array 1st x-grid line to define box. (Used only if
LLBREZE=T.) (One for each box.)
XG2 real array 2nd x-grid line to define box. (Used only if
LLBREZE=T.) (One for each box.)
YG1 real array 1st y-grid line to define box. (Used only if
LLBREZE=T.) (One for each box.)
YG2 real array 2nd y-grid line to define box. (Used only if
LLBREZE=T.) (One for each box.)
XBCST real array Beginning x coordinate (km) of user defined coastline
(straight line). (Used only if LLBREZE=T.) (One for
each box.)
YBCST real array Beiginning y coordinate (km) of user defined coastline
(straight line). (Used only if LLBREZE=T.) (One for
each box.)
1.0
1000.
0
0
F
-
-
-
-
-
-
-
(Input Group 5 Continued)
8-47