Table of Contents - The Atmospheric Studies Group at TRC

Section 8: CALMET Model Files
Table 8-4 (Continued)
Input Group 3 - Output Options
Variable Type Description Default Value
NZPRN2 * integer Number of levels, starting at the surface, printed
to the wind field testing and debug files (Units
41-45).
IPR0 * integer Control variable for printing to the wind field
test files the interpolated wind components.
(0=do not print, 1=print.)
IPR1 * integer Control variable for printing to the wind field
test files the terrain adjusted surface wind
components. (0=do not print, 1=print.) Used
only with objective analysis.
IPR2 * integer Control variable for printing to the wind field
test files the smoothed wind components and
initial divergence fields. (0=do not print,
1=print).
IPR3 * integer Control variable for printing to the wind field
test files the final wind speed and direction
fields. (0=do not print, 1=print.)
IPR4 * integer Control variable for printing to the wind field
test files the final divergence fields. (0=do not
print, 1=print.)
IPR5 * integer Control variable for printing to the wind field
test files the wind fields after kinematic effects
are added. (0=do not print, 1=print.)
IPR6 * integer Control variable for printing to the wind field
test files the wind fields after the Froude number
adjustment is made. (0=do not print, 1=print.)
IPR7 * integer Control variable for printing to the wind field
test files the wind fields after the slope flows are
added. (0=do not print, 1=print.)
1
0
0
0
0
0
0
0
0
(Input Group 3 Continued)
8-38