Table of Contents - The Atmospheric Studies Group at TRC

Section 8: CALMET Model Files
Table 8-4 (Continued)
Input Group 3 – Output Options
Variable Type Description Default Value
SENSHEAT integer Control variable determining if gridded
fields of sensible heat fluxes are printed.
(0=do not print, 1=print.) (Used only if
LPRINT=T.)
CONVZI integer Control variable determining if gridded
fields of convective mixing heights are
printed. (0=do not print, 1=print.) (Used
only if LPRINT=T.)
LDB * logical Control variable for printing of input
meteorological data and internal control
parameters. Useful for program testing and
debugging. If LDB=T, data will be printed
for time steps "NN1" through "NN2" to the
output list file (CALMET.LST).
NN1 * integer First time step for which data controlled by
LDB switch are printed. (Used only if
LDB=T.) Note: IF NN1=NN2=0 and
LDB=T, only time-independent data will be
printed.
NN2 * integer Last time step for which data controlled by
LDB switch are printed. (Used only if
LDB=T.)
LDBCST * logical Print distance to land internal variables
switch
0
0
F
0
0
F
IOUTD * integer Control variable for writing the computed
wind fields to the wind field test disk files.
(0=do not write, 1=write.)
(Input Group 3 Continued)
8-37