Table of Contents - The Atmospheric Studies Group at TRC

Section 8: CALMET Model Files
Table 8-4 (Continued)
Input Group 1
Variable Type Description Default Value
RLON0 character*16 Reference longitude (degrees) of origin of map
projection. Enter numerical value followed by E for
East Longitude or W for West Longitude. Used only
if PMAP= TTM, LCC, PS, EM, or LAZA
XLAT1
XLAT2
character*16
Latitudes (degrees) of the two matching parallels for
map projection (Used only if PMAP= LCC or PS).
Enter numerical value followed by N for North
Latitude or S for South Latitude.
-
-
DATUM character*8 DATUM Code for grid coordinates. WGS-G
NX integer Number of grid cells in the X direction -
NY integer Number of grid cells in the Y direction -
Input Group 2 - Grid Control Parameters
Variable Type Description Default Value
DGRIDKM real Horizontal grid spacing (km) -
XORIGKM real Reference X coordinate* (km) of the southwest corner
of grid cell (1,1)
YORIGKM real Reference Y coordinate* (km) of the southwest corner
of grid cell (1,1)
-
-
NZ integer Number of vertical layers -
ZFACE real array Cell face heights (m). Note: Cell center height of
layer "i" is (ZFACE(i+1) + ZFACE(i))/2. NZ+1
values must be entered.
* PMAP projections PS, EM, and LAZA are NOT AVAILABLE in CALMET
-
Table 8-4 (Continued)
Input Group 3 - Output Options
Variable Type Description Default Value
LSAVE logical Disk output control variable. If LSAVE=T,
the gridded wind fields are stored in an
output disk file (CALMET.DAT).
T
8-34