Table of Contents - The Atmospheric Studies Group at TRC

Section 8: CALMET Model Files
Table 8-3 (Continued)
Sample CALMET Control File (CALMET.INP)
Input Group 3
1 = CALPUFF/CALGRID type file (CALMET.DAT)
2 = MESOPUFF-II type file (PACOUT.DAT)
LINE PRINTER OUTPUT OPTIONS:
Print met. fields (LPRINT) Default: F ! LPRINT = T !
(F = Do not print, T = Print)
(NOTE: parameters below control which
met. variables are printed)
Print interval
(IPRINF) in hours Default: 1 ! IPRINF = 6 !
(Meteorological fields are printed
every 6 hours)
Specify which layers of U, V wind component
to print (IUVOUT(NZ)) -- NOTE: NZ values must be entered
(0=Do not print, 1=Print)
(used only if LPRINT=T) Defaults: NZ*0
! IUVOUT = 1 , 0 , 0 , 0 , 0 , 0 !
-----------------------
Specify which levels of the W wind component to print
(NOTE: W defined at TOP cell face -- 6 values)
(IWOUT(NZ)) -- NOTE: NZ values must be entered
(0=Do not print, 1=Print)
(used only if LPRINT=T & LCALGRD=T)
-----------------------------------
Defaults: NZ*0
! IWOUT = 0 , 0 , 0 , 0 , 0 , 0 !
Specify which levels of the 3-D temperature field to print
(ITOUT(NZ)) -- NOTE: NZ values must be entered
(0=Do not print, 1=Print)
(used only if LPRINT=T & LCALGRD=T)
-----------------------------------
Defaults: NZ*0
! ITOUT = 1 , 0 , 0 , 0 , 0 , 0 !
8-14