Table of Contents - The Atmospheric Studies Group at TRC

More documents

Recommendations

Info

Section 2: Geophysical Data Processors LAZA: Lambert Azimuthal Equal Area False Easting and Northing (km) at the projection origin (Used only if PMAP= TTM, LCC, or LAZA) (FEAST) Default=0.0 ! FEAST = 0.0 ! (FNORTH) Default=0.0 ! FNORTH = 0.0 ! Table 2-14 (continued) Sample MAKEGEO Control File (MAKEGEO.INP) UTM zone (1 to 60) (Used only if PMAP=UTM) (IUTMZN) No Default ! IUTMZN = 19 ! Hemisphere for UTM projection (Used only if PMAP=UTM) (UTMHEM) Default: N ! UTMHEM = N ! N : Northern hemisphere projection S : Southern hemisphere projection Latitude and Longitude (decimal degrees) of projection origin (Used only if PMAP= TTM, LCC, PS, EM, or LAZA) (RLAT0) No Default ! RLAT0 = 40.0N ! (RLON0) No Default ! RLON0 = 70.0W ! TTM : RLON0 identifies central (true N/S) meridian of projection RLAT0 selected for convenience LCC : RLON0 identifies central (true N/S) meridian of projection RLAT0 selected for convenience PS : RLON0 identifies central (grid N/S) meridian of projection RLAT0 selected for convenience EM : RLON0 identifies central meridian of projection RLAT0 is REPLACED by 0.0N (Equator) LAZA: RLON0 identifies longitude of tangent-point of mapping plane RLAT0 identifies latitude of tangent-point of mapping plane Matching parallel(s) of latitude (decimal degrees) for projection (Used only if PMAP= LCC or PS) (RLAT1) No Default ! RLAT1 = 30.0N ! (RLAT2) No Default ! RLAT2 = 60.0N ! LCC : Projection cone slices through Earth's surface at RLAT1 and RLAT2 PS : Projection plane slices through Earth at RLAT1 (RLAT2 is not used) ---------- Note: Latitudes and longitudes should be positive, and include a letter N,S,E, or W indicating north or south latitude, and east or west longitude. For example, 35.9 N Latitude = 35.9N 118.7 E Longitude = 118.7E 2-55
Section 2: Geophysical Data Processors Output Datum-Region ------------------- The Datum-Region for the output coordinates is identified by a character string. Many mapping products currently available use the model of the Earth known as the World Geodetic System 1984 (WGS-84). Other local models may be in use, and their selection in TERREL will make its output consistent with local mapping products. The list of Datum-Regions with official transformation parameters is provided by the National Imagery and and Mapping Agency (NIMA). Datum-region for output coordinates (DATUM) Default: WGS-84 ! DATUM = NAS-C ! Grid ---- Reference coordinates X,Y (km) assigned to the southwest corner of grid cell (1,1) (lower left corner of grid) (XREFKM) No Default ! XREFKM = 310.0 ! Table 2-14 (continued) Sample MAKEGEO Control File (MAKEGEO.INP) (YREFKM) No Default ! YREFKM = 4820.0 ! Cartesian grid definition No. X grid cells (NX) No default ! NX = 99 ! No. Y grid cells (NY) No default ! NY = 99 ! Grid Spacing (DGRIDKM) No default ! DGRIDKM = 1. ! in kilometers !END! -------------------------------------------------------------------------------- INPUT GROUP: 3 -- Output Land Use -------------- ------------- Subgroup (3a) ------------- Number of output land use categories (NOUTCAT) Default: 14 ! NOUTCAT = 14 ! Output land use categories assigned to water range from IWAT1 to IWAT2 (inclusive) (IWAT1) Default: 50 ! IWAT1 = 50 ! 2-56
Page 1 and 2:
CALPUFF Modeling System Version 6 U
Page 3 and 4:
Section 1: Introduction 7.5 CALWRF
Page 5 and 6:
Section 1: Introduction List of Fig
Page 7 and 8:
Section 1: Introduction Table 3-1:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Section 1: Introduction introductio
Page 15 and 16:
Section 1: Introduction released a
Page 17 and 18:
Section 1: Introduction CALMET Upd
Page 19 and 20:
Section 1: Introduction To enhance
Page 21 and 22:
Section 1: Introduction Meteorologi
Page 23 and 24:
Section 1: Introduction READ62 is a
Page 25 and 26:
Section 1: Introduction contained i
Page 27 and 28:
Section 1: Introduction OPTHILL uti
Page 29 and 30:
Section 1: Introduction From CALPUF
Page 31 and 32:
Section 1: Introduction Observation
Page 33 and 34:
Section 1: Introduction Slope Flows
Page 35 and 36:
Section 1: Introduction CALPUFF con
Page 37 and 38:
Page 39 and 40:
Section 1: Introduction 1.5 Summary
Page 41 and 42:
Section 1: Introduction If the uppe
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Section 1: Introduction Table 1-5 (
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Section 1: Introduction 1-44
Page 57 and 58:
Section 1: Introduction technical o
Page 59 and 60:
Section 2: Geophysical Data Process
Page 61 and 62: Section 2: Geophysical Data Process
Page 111: Section 2: Geophysical Data Process
Page 127 and 128: Section 3: READ62 Upper Air Preproc
Page 141 and 142: Section 4: PXTRACT Precipitation Da
Page 151 and 152: Section 5: PMERGE Precipitation Dat
Page 163 and 164:
Section 5: PMERGE Precipitation Dat
Page 165 and 166:
Section 6: SMERGE Surface Data Mete
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Section 7: Prognostic Meteorologica
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Section 8: CALMET Model Files (e.g.
Page 269 and 270:
Section 8: CALMET Model Files Table
Page 271 and 272:
Section 8: CALMET Model Files descr
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Section 8: CALMET Model Files range
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Section 8: CALMET Model Files recor
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Section 8: CALMET Model Files 30 11
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Section 8: CALMET Model Files 8.10
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Section 8: CALMET Model Files 4 NUS
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Section 8: CALMET Model Files CALME
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Section 8: CALMET Model Files 8.1.1
Page 403 and 404:
Section 8: CALMET Model Files ┌
Page 405 and 406:
Page 407 and 408:
Section 8: CALMET Model Files 8.2 P
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Section 8: CALMET Model Files -----
Page 427 and 428:
Section 8: CALMET Model Files 6 0 0
Page 429 and 430:
Section 8: CALMET Model Files 3 1 1
Page 431 and 432:
Section 8: CALMET Model Files IBHR
Page 433 and 434:
Section 8: CALMET Model Files Multi
Page 435 and 436:
Page 437 and 438:
Section 9: CALPUFF 9. CALPUFF The C
Page 439 and 440:
Section 9: CALPUFF The control file
Page 441 and 442:
Section 9: CALPUFF Table 9-1: Input
Page 443 and 444:
Section 9: CALPUFF 17a,b Non-gridde
Page 445 and 446:
Section 9: CALPUFF MASSBAL.DAT outp
Page 447 and 448:
Section 9: CALPUFF d The filenames
Page 449 and 450:
Section 9: CALPUFF >0 = File update
Page 451 and 452:
Section 9: CALPUFF 0 = chemical tra
Page 453 and 454:
Section 9: CALPUFF [DIAGNOSTIC FEAT
Page 455 and 456:
Section 9: CALPUFF ! CSPEC = SO2 !
Page 457 and 458:
Section 9: CALPUFF WGS-84 NAS-C NAR
Page 459 and 460:
Section 9: CALPUFF for selected spe
Page 461 and 462:
Section 9: CALPUFF ---------------
Page 463 and 464:
Section 9: CALPUFF --------- ------
Page 465 and 466:
Section 9: CALPUFF Input Group 11 O
Page 467 and 468:
Section 9: CALPUFF (XLAIIN) Default
Page 469 and 470:
Section 9: CALPUFF Minimum mixing h
Page 471 and 472:
Section 9: CALPUFF Near-Surface dep
Page 473 and 474:
Section 9: CALPUFF Sample CALPUFF C
Page 475 and 476:
Section 9: CALPUFF -------- a Data
Page 477 and 478:
Section 9: CALPUFF Number of buoyan
Page 479 and 480:
Section 9: CALPUFF -------- a Data
Page 481 and 482:
Section 9: CALPUFF Number of non-gr
Page 483 and 484:
Section 9: CALPUFF 9-47
Page 485 and 486:
Section 9: CALPUFF Table 9-3 (Conti
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Section 9: CALPUFF IOUTU IOVERS int
Page 493 and 494:
Section 9: CALPUFF MSHEAR integer V
Page 495 and 496:
Section 9: CALPUFF MDISP integer Me
Page 497 and 498:
Section 9: CALPUFF MPDF integer Pro
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Section 9: CALPUFF IMFLX integer Co
Page 509 and 510:
Section 9: CALPUFF IPRTU integer Co
Page 511 and 512:
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Section 9: CALPUFF BCKNH3(12) real
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Section 9: CALPUFF CDIV(2) real Div
Page 527 and 528:
Section 9: CALPUFF *MDEPBC integer
Page 529 and 530:
Section 9: CALPUFF BDOWN real Build
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Section 9: CALPUFF source is treate
Page 539 and 540:
Page 541 and 542:
Section 9: CALPUFF (i.e., !END!). I
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Section 9: CALPUFF (i.e., !END!). I
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Section 9: CALPUFF terminator (i.e.
Page 555 and 556:
Section 9: CALPUFF Table 9-3 (Concl
Page 557 and 558:
Section 9: CALPUFF 9.2 Meteorologic
Page 559 and 560:
Section 9: CALPUFF if(nssta.ge.1)th
Page 561 and 562:
Section 9: CALPUFF Table 9-4: CALME
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Section 9: CALPUFF Table 9-4 (Concl
Page 569 and 570:
Section 9: CALPUFF 4 b 6 ZTEMP real
Page 571 and 572:
Section 9: CALPUFF 9 6 WSTAR real a
Page 573 and 574:
Section 9: CALPUFF 14 6 IRH integer
Page 575 and 576:
Section 9: CALPUFF variable dispers
Page 577 and 578:
Section 9: CALPUFF Table 9-6: Sampl
Page 579 and 580:
Section 9: CALPUFF NCOMM+6 * intege
Page 581 and 582:
Section 9: CALPUFF Table 9-8 (conti
Page 583 and 584:
Section 9: CALPUFF table. A descrip
Page 585 and 586:
Section 9: CALPUFF Table 9-10: PLMM
Page 587 and 588:
Section 9: CALPUFF 9.2.4 SURFACE.DA
Page 589 and 590:
Section 9: CALPUFF Table 9-12: Samp
Page 591 and 592:
Section 9: CALPUFF Table 9-13 (cont
Page 593 and 594:
Section 9: CALPUFF Table 9-14: SURF
Page 595 and 596:
Section 9: CALPUFF Table 9-14 (conc
Page 597 and 598:
Section 9: CALPUFF Table 9-15 (cont
Page 599 and 600:
Section 9: CALPUFF 9.3 Point Source
Page 601 and 602:
Section 9: CALPUFF Table 9-17: PTEM
Page 603 and 604:
Section 9: CALPUFF Table 9-17 (Cont
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Section 9: CALPUFF 9.4 Buoyant Area
Page 611 and 612:
Section 9: CALPUFF Table 9-21: BAEM
Page 613 and 614:
Section 9: CALPUFF . . . . . . . .
Page 615 and 616:
Section 9: CALPUFF Table 9-23 (Conc
Page 617 and 618:
Page 619 and 620:
Section 9: CALPUFF NCOMM+8 or 9 IEJ
Page 621 and 622:
Section 9: CALPUFF Table 9-26: LNEM
Page 623 and 624:
Section 9: CALPUFF a C*16 = Charact
Page 625 and 626:
Page 627 and 628:
Page 629 and 630:
Section 9: CALPUFF * "NSE" elements
Page 631 and 632:
Page 633 and 634:
Section 9: CALPUFF 9.7 Boundary Con
Page 635 and 636:
Section 9: CALPUFF Table 9-32: Boun
Page 637 and 638:
Page 639 and 640:
Page 641 and 642:
Page 643 and 644:
Page 645 and 646:
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Section 9: CALPUFF The model checks
Page 657 and 658:
Section 9: CALPUFF 9.11 Site-Specif
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
Section 9: CALPUFF Table 9-43: HILL
Page 665 and 666:
Page 667 and 668:
Section 9: CALPUFF where the follow
Page 669 and 670:
Section 9: CALPUFF 9.14 Mass Flux B
Page 671 and 672:
Section 9: CALPUFF Table 9-49: FLUX
Page 673 and 674:
Section 9: CALPUFF 9.15 CALPUFF Out
Page 675 and 676:
Section 9: CALPUFF IF(NVL1.GT.0) RE
Page 677 and 678:
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Section 9: CALPUFF 1 XRCT real arra
Page 685 and 686:
Section 9: CALPUFF C*16 = Character
Page 687 and 688:
Section 9: CALPUFF C*16 = Character
Page 689 and 690:
Section 9: CALPUFF CONC.DAT File -
Page 691 and 692:
Section 9: CALPUFF Table 9-53: Unfo
Page 693 and 694:
Page 695 and 696:
Section 9: CALPUFF 9.15.4 Dry Flux
Page 697 and 698:
Section 9: CALPUFF 1 NCOM integer N
Page 699 and 700:
Section 9: CALPUFF 24 IBSAMP intege
Page 701 and 702:
Section 9: CALPUFF 48 RELON0 real E
Page 703 and 704:
Section 9: CALPUFF 1-NDFOUT CDFOUT
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Section 9: CALPUFF nxg = IESAMP - I
Page 713 and 714:
Page 715 and 716:
Section 9: CALPUFF IF(NVL1.GT.0) RE
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Page 729 and 730:
Page 731 and 732:
Section 9: CALPUFF 5 SYKM real Sour
Page 733 and 734:
Section 9: CALPUFF 9.15.6 Relative
Page 735 and 736:
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
Page 743 and 744:
Page 745 and 746:
Page 747 and 748:
Page 749 and 750:
Section 9: CALPUFF a C*15 = Charact
Page 751 and 752:
Page 753 and 754:
Section 9: CALPUFF 16 Length Emitte
Page 755 and 756:
Page 757 and 758:
Page 759 and 760:
Section 9: CALPUFF Figure 9-1: Prof
Page 761 and 762:
Section 9: CALPUFF Table 9-64 summa
Page 763 and 764:
Section 9: CALPUFF Figure 9-2: Map
Page 765 and 766:
Section 9: CALPUFF Table 9-67: OPTH
Page 767 and 768:
Section 9: CALPUFF This process is
Page 769 and 770:
Section 10: POSTPROCESSORS 10.1 APP
Page 771 and 772:
Section 10: POSTPROCESSORS Table 10
Page 773 and 774:
Page 775 and 776:
Page 777 and 778:
Page 779 and 780:
Section 10: POSTPROCESSORS NFILE S
Page 781 and 782:
Page 783 and 784:
Section 10: POSTPROCESSORS 10.3 POS
Page 785 and 786:
Section 10: POSTPROCESSORS The name
Page 787 and 788:
Section 10: POSTPROCESSORS MNITRATE
Page 789 and 790:
Page 791 and 792:
Page 793 and 794:
Section 10: POSTPROCESSORS --------
Page 795 and 796:
Page 797 and 798:
Page 799 and 800:
Section 10: POSTPROCESSORS Note the
Page 801 and 802:
Page 803 and 804:
Section 10: POSTPROCESSORS Chemical
Page 805 and 806:
Section 10: POSTPROCESSORS N S PM10
Page 807 and 808:
Section 10: POSTPROCESSORS 10.4 CAL
Page 809 and 810:
Page 811 and 812:
Page 813 and 814:
Section 10: POSTPROCESSORS 10.5 Inp
Page 815 and 816:
Page 817 and 818:
Page 819 and 820:
Page 821 and 822:
Page 823 and 824:
Page 825 and 826:
Page 827 and 828:
Page 829 and 830:
Section 10: POSTPROCESSORS selected
Page 831 and 832:
Section 10: POSTPROCESSORS or yyyy_
Page 833 and 834:
Section 10: POSTPROCESSORS Species
Page 835 and 836:
Section 10: POSTPROCESSORS identify
Page 837 and 838:
Section 10: POSTPROCESSORS PM COARS
Page 839 and 840:
Section 10: POSTPROCESSORS Addition
Page 841 and 842:
Section 10: POSTPROCESSORS 1 = g/m*
Page 843 and 844:
Section 10: POSTPROCESSORS Accumula
Page 845 and 846:
Page 847 and 848:
Page 849 and 850:
Page 851 and 852:
Section 10: POSTPROCESSORS 10.6 Out
Page 853 and 854:
Page 855 and 856:
Page 857 and 858:
Page 859 and 860:
Page 861 and 862:
Page 863 and 864:
Page 865 and 866:
Page 867 and 868:
Page 869 and 870:
Page 871 and 872:
Page 873:
show all

Table of Contents - The Atmospheric Studies Group at TRC

Create successful ePaper yourself

Delete template?

Save as template?